How to install a Safe to the Floor

In this ‘how to’ video from safe.co.uk we take you through the steps required to correctly secure your safe to the floor. The video includes detailed information on how to prepare the location for your floor safe installation, tips on ensuring it meets with your insurer's requirements and lists the tools that you’ll need to complete the task.

[@OhPhilly]

To anyone who cares, don't use these type of dynabolts, they can be rocked loose. Use the ramset plastic inserts and coach bolts. They bite hard and won't respond to rocking as much. If you beat this with a sledge hammer it will raise 5mm on one side from there it can be rocked.

[@MindsetMasteryEvolution]

Got it

[@prepperpov5852]

Thanks. This is exactly the type of video that I was looking for.

[@braingasim]

Shouldnt the safe also be set on a rubber mat or pad so no condensation will form between the concrete and the metal?

[@user-ev8ss9bb4q]

Very well explained.

[@KRich408]

If you really want it to stay you can shoot some epoxy in before the expanding bolts, just work fast enough tighten the safe down.

[@Delta922]

Can I use a sharpe to mark the holes?

[@thesafeshop]

Yes, it would be fine to use a Sparpe. We've used a pencil in our example but any form of marking the hole locations is acceptable.