Great aesthetics! It looks like a real, legitimate factory. Also, I can see why you prefer having your belts in the open instead of hiding them in logistics floors. It is neat seeing the stators rolling along the assembly line on the way to becoming a motor.
I feel like it's such a good mix of sending things underneath for floor to floor but still seeing so much action in the room! On to the next one for some computers 🙂
Love the design of the buildings. 💡Tip one To pull power true the floors, place a pillar on the foundation, from above place a pillar directly under the other through the foundation (glitch) remove the top pillar and now you can place a wall outlet on the floor, after this you also remove the bottom pillar and place a 2nd wall outlet on the ceiling... now you just have to connect the 2 💡Second tip centering LCD, or other stuff , hold LCD on the almost correct location , lock it with H , now nudge using the arrow keys while holding CTRL, when happy place it with LMB.
Im one of the people that does the beam frame for connecting machines to. I do it for estetics. I dont like having all the powerpoles all over. Another way is connecting them from underneath. Also takes out powerpoles and is cleaner. Play with the lumen and signs for a bit. You'll find a lot of cool ways to use them
I think I may end up doing the beam frame as well getting tired of placing power poles lol I can pretty much only turn on lumen for a thumbnail screenshot hopefully I can play with it fully on someday 🙂
Amazing Work Cheffrey... I realize you can take the clip mode off, so you put anything where you want. For example the signs.. Love your Vids, Keep up the great work
I'm starting to learn some fun placement ideas it's working out well! It took me this long to even figure out if you hold control while nudging you get slightly smaller increments as well 🙂 Looking forward to more cosmetics!
I'm curious why do you start your vehicle paths before a station, I understand the efficiency of running the first loop while recording and delivering stuff. I don't think path nodes can be moved just deleted, I could be wrong, as I haven't attempted. Final edit.. you forgot about b for flashlight😂
I always forget to turn that dang thing on! The vehicle paths are just because I watched a tip video saying if you start them right before the station it helps when setting up multiple vehicles on the same path... Not that I've done that yet but that's just what I based it off... If there is another way I'd love to learn 🙂
@@CheffreyPlaysGames i just drive from station to station, I send you my save this weekend. Sure the explorers popcorn some times around the fuel hub but no issues from it so far.
The only way I design my factories is "how can I do this in a way that allows my computer to not crash and run more than 10fps". I have to get very creative
I toured a world recently somebody sent me that absolutely ended my computer LOL I'm a bit nervous going forward but fingers crossed if I spread things out enough it should be better 🙂
Great aesthetics! It looks like a real, legitimate factory. Also, I can see why you prefer having your belts in the open instead of hiding them in logistics floors. It is neat seeing the stators rolling along the assembly line on the way to becoming a motor.
I feel like it's such a good mix of sending things underneath for floor to floor but still seeing so much action in the room!
On to the next one for some computers 🙂
Love the design of the buildings. 💡Tip one To pull power true the floors, place a pillar on the foundation, from above place a pillar directly under the other through the foundation (glitch) remove the top pillar and now you can place a wall outlet on the floor, after this you also remove the bottom pillar and place a 2nd wall outlet on the ceiling... now you just have to connect the 2 💡Second tip centering LCD, or other stuff , hold LCD on the almost correct location , lock it with H , now nudge using the arrow keys while holding CTRL, when happy place it with LMB.
Great tips thanks Wildtboy! I've been trying to get better at power placement it's been making some good progress!
Hope you enjoy the series 🙂
Im one of the people that does the beam frame for connecting machines to. I do it for estetics. I dont like having all the powerpoles all over. Another way is connecting them from underneath. Also takes out powerpoles and is cleaner. Play with the lumen and signs for a bit. You'll find a lot of cool ways to use them
I think I may end up doing the beam frame as well getting tired of placing power poles lol
I can pretty much only turn on lumen for a thumbnail screenshot hopefully I can play with it fully on someday 🙂
Oh the Bob Ross of Satisfactory. 🤣 you need to get more colourful then with your builds AND incorporate more nature into your factories then. 😁
I miss doing cosmetics so much! I hope with the 1.0 optimizations my PC can handle all these cool decorations better 🙂
@@CheffreyPlaysGames Perhaps an upgrade is needed? Mind you i am only in ep. 24 and you have 55+ episodes!
Amazing Work Cheffrey... I realize you can take the clip mode off, so you put anything where you want. For example the signs.. Love your Vids, Keep up the great work
I'm starting to learn some fun placement ideas it's working out well!
It took me this long to even figure out if you hold control while nudging you get slightly smaller increments as well 🙂
Looking forward to more cosmetics!
Good stuff.
Thanks Dan! Looking forward to this computer build coming next!
Nice work 🔥
Thanks for watching 🙂
Wooooooo
Snii is feeling it! SO AM I!
I find a lot of times, if you rotate the walkways instead of looking around, they pop up faster.
Oh snap that will help a bunch! It really slowed me down!
Thanks for the awesome tip David! 🙂
Gonna watch it soon the thumbnail looks amazing 😲🔥guess you went to work on the factory 😂.
Overhaul time Fawaz!
I struggled a bit again but make sure you stick around for the bonus at the very end I promise it's worth it 🙂
I always love decorating in games! Will watch when I’m home 🔥
Thank you I appreciate the support ❤️
I'm definitely getting better each time I try!
I'm curious why do you start your vehicle paths before a station, I understand the efficiency of running the first loop while recording and delivering stuff.
I don't think path nodes can be moved just deleted, I could be wrong, as I haven't attempted. Final edit.. you forgot about b for flashlight😂
I always forget to turn that dang thing on!
The vehicle paths are just because I watched a tip video saying if you start them right before the station it helps when setting up multiple vehicles on the same path... Not that I've done that yet but that's just what I based it off... If there is another way I'd love to learn 🙂
Xi sorry but I don't see you discord listed
@@samson7770
discord.com/invite/msbkEqC
Thank you for noticing I thought I added it to the socials list already 🙂
@@CheffreyPlaysGames i just drive from station to station, I send you my save this weekend. Sure the explorers popcorn some times around the fuel hub but no issues from it so far.
@@douglashanks4189 please do Im really enjoying checking out your worlds!
I'll give it a try just station to station next time 👍
The only way I design my factories is "how can I do this in a way that allows my computer to not crash and run more than 10fps". I have to get very creative
I toured a world recently somebody sent me that absolutely ended my computer LOL I'm a bit nervous going forward but fingers crossed if I spread things out enough it should be better 🙂