How to Replace Headlights 2010-2016 Cadillac SRX

Sdílet
Vložit
  • čas přidán 17. 05. 2022
  • Buy Now!
    New Headlight Set from 1AAuto.com 1aau.to/ie/1ALHP00976
    This video shows you how to install headlight assemblies on your 2010-2016 Cadillac SRX. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
    This process should be similar on the following vehicles:
    2010 Cadillac SRX
    2011 Cadillac SRX
    2012 Cadillac SRX
    2013 Cadillac SRX
    2014 Cadillac SRX
    2015 Cadillac SRX
    2016 Cadillac SRX
    Tools you will need:
    • Phillips Head Screwdriver 1aau.to/oeS/1AXAA00013
    • 10mm Socket 1aau.to/odW/1AXAA00017
    • 7mm Socket 1aau.to/odW/1AXAA00017
    • Trim Tool Set 1aau.to/obm/1AXXX00006
    • 1/2 Inch Ratchet 1aau.to/obP/1AXAA00043
    • 1/4 Inch Ratchet 1aau.to/odW/1AXAA00017
    • 3/8 Inch Drive Ratchet 1aau.to/oex/1AXAA00015
    • Gloves 1aau.to/oX/1AXSS00048
    • Safety Glasses 1aau.to/oQ/1AXAA00343
    • Pick 1aau.to/oaA/1AXAA00037
    Subscribe: / @trq
    Check out our playlist:
    Cadillac SRX 2010-2016 2nd Generation: • Cadillac SRX 2010-2016...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Auta a dopravní prostředky

Komentáře • 21

  • @TRQ
    @TRQ  Před 2 lety +1

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @longsnapper5381
    @longsnapper5381 Před rokem +7

    I haven't worked on a car since my teen years with my dad. I actually think I'm going to do this with the help of your great video. Thank you so much.

  • @cricketnturtle
    @cricketnturtle Před 2 lety +7

    This video is spot on! I didn’t have the wipers on the headlamps so we didn’t have to mess with that . Cadillac SRX 2014. Great Job on the video!

  • @benhudman7911
    @benhudman7911 Před rokem +7

    I surely appreciate your tutorial. You made this job so much easier with the step by step and tool recommendations. You are a great teacher.

  • @jooooooooo3236
    @jooooooooo3236 Před 10 měsíci +14

    Why would they make it this difficult 🤦🏾‍♀️

  • @gtomorris
    @gtomorris Před 10 měsíci +2

    Excellent video. Followed it step by step and the job was not difficult.

  • @milesellis1885
    @milesellis1885 Před 11 měsíci +1

    I found your instructions almost perfect for my repair. Only my 2016 SRX had Torx screws in the wheel wells. Great job! 👍

  • @ronaldkammeyer9143
    @ronaldkammeyer9143 Před rokem +2

    Great tutorial but I have a couple of comments for the 2016 SRX. First the screws in the fender well are not "phillips" type. They are a very small "star" bit screws. Second, on the bottom of each head lamp are plastic components that need to be transferred onto the respective "replacement" lamps. Lastly pick up some replacement "Trim" buttons. I had a few break due to age. Otherwise perfect accuracy so Thanks very much TRQ for putting together the video.

  • @seanr2157
    @seanr2157 Před 8 měsíci

    This video was very well done! You’ve explained everything with easy to follow and thorough detail that is overlooked by many content creators. Thanks so much!

  • @jimbailey6478
    @jimbailey6478 Před 6 měsíci

    Great video. Used it as a guide to replace the headlamp assemblies on my 2012 SRX. Easy peasy. Thank you very much for the guidance! 😊

  • @gtomorris
    @gtomorris Před 11 měsíci +6

    Why do the GM engineers hate mechanics so much? This could have been designed so much better.

  • @xtra-air
    @xtra-air Před rokem +1

    Nice job! thanks for sharing.

  • @TerrorswellFPV
    @TerrorswellFPV Před 9 měsíci

    You sir are a good man. Thank you for the great tutorial.

  • @dizbob6250
    @dizbob6250 Před 9 měsíci

    Spot on video. Wow! More work than I thought😢

    • @TRQ
      @TRQ  Před 9 měsíci

      +DIZ BOB Thanks for watching our video! 1aau.to/m/Shop-TRQ

  • @kimwilliams6998
    @kimwilliams6998 Před rokem +2

    Is there a way to change from HID to halogen?

  • @rooseveltsawyer7609
    @rooseveltsawyer7609 Před rokem

    @TRQ Excellent video instructions, thank you for sharing. Will the Cadillac adapted forward lighting feature work with these headlights? I purchased a 2016 SRX last week and can not safely drive at night. However, I read about the AFL feature in the user manual. Since I haven't experienced the feature, it will not deter me from purchasing the recommended headlights.

  • @Knightrider777
    @Knightrider777 Před 10 měsíci

    Thanks you saved me a bunch of $$$$$

  • @gmack7488
    @gmack7488 Před 4 měsíci +1

    Why would they make this so dam difficult

  • @kawaprepa5
    @kawaprepa5 Před 7 měsíci

    omg,,it's lots of labor. 😮

  • @AnotherOpinionatedIdiot
    @AnotherOpinionatedIdiot Před měsícem

    This should be illegal