Bolting a Wheel to the Crank p.2 (w/ additional reduction): Send-off for the Moon Rover...
Vložit
- čas přidán 26. 01. 2024
- Grab some G54 merch here - www.en.garage54.ru/
We turn the moon rover into a merry-go-round.
For business inquiries: promotion@garage54.ru - Auta a dopravní prostředky
Laughter is laughter, no matter what the parent language is. Excellent as usual.
Ramember kids, you can't have slaughter without laughter!
The whole world need more leaders like Vlad. Every time you do something strange to a car he's the first one behind the wheel...
Only cos it’s too much fun! 🤩
He should run for president in russia
@@matejgrim Vlad from G54 would be a much better president for Russia, while Richard Hammond (Top Gear) would be the Prime Minister of the UK. What about for the US? US car shows are not that good.
@@thatguyalex2835we have Terry crews. President Camacho baby
Thank you for continuing making awesome videos during a very difficult time in your country.
I live in the U.S. and fully appreciate yall.
so you appreciate what?
So in Sweden We do not want NATO It happens above our heads
@@kolmevaristaTheir content
@@kolmevarista Russian people. M, kay?
I love that they kept the steering wheel.
Go fast and turn left they say.
That's for hanging on. No seatbelts.
Placebo effect 😂
they could weld together a contraption that allows them to turn the front wheel, making it somewhat possible to move the car in a certain diraction
@@GaryTheRCcar In other words, a front-wheel drive car.
You should lock the inside rear wheel, and pivot the drive wheel 10 degrees inwards. It will go really fast then
Oh, I like your thinking.
If you lock the outside rear wheel it would spinn more, then the insider rear wheel would even back up.
The right side...
You know your shit, that’s a damn good idea hro
Instead of altering the outside wheel, give it power
That's a whole Lada modifications!
I have to wonder if this is how the Robin Reliant was invented.
Yep, and the car is a whole Lada bent & collapsed!
"OK, let's carry on!" Vlad opens the passenger door, it drops, the whole car sags even more!... Perfect response! Be safe, fellas!
First time in my life I have seen a car that literally bent over and almost broken in half. Way to go guys. That car body was used in a 100% and is ready for scrapyars ☺
czcams.com/video/ycfzeMv3K5M/video.htmlsi=hfYTGuTS8aPPmf3H
107% you mean. ^^
@@MegaSockenschusscar was 107% worn out
You could weld together a contraption that allows them to turn the front wheel, making it somewhat possible to move the car in a certain diraction
as a long term subscriber of your channel i just wanna say i speak on behalf of 99% of uk people we love you russian brothers and sisters we need our leaders to sort it out we dont want war....
keep up the hilarious good content vlad and team your all ledgends my friends take care much love 🙏❤️ lee uk
they just give me the laughs every time, discovering them was the best thing ever xd
Another awesome experiment. That looked like so much fun. 😂
Man. Felt like this video didn’t go anywhere. Like you were just going in circles….. oh wait. Well done!
Again brothers that was awsome......
Time for the Garage 54 amusement park - every custom ride powered by old Ladas ;)
Just love the way the car sags. Keep up the entertainment 😀
They finally got it to work! The most fun one can have in a vehicle inside of a confined space. Great video!
love your content im from the u.s. and have enjoyed your content for a couple years now keep it up our thoughts are with you and the people of your country
LOLOL This ranks up with the best of all times . That poor Lada is pretty much used up I think . lol Excellent guys . :)
Park it out back and run it as a backup generator.
It’s still got a few decades of engine life left😂
Over here we call that Jerry-Riging and I must say that is some serious Jerry-Riging 😂👍👍👍👍
Ah, the revisit so many have been waiting for!
“Look at the door, it no longer closes- let’s continue” 😂😂😂
You could probably find an aircraft APU (Turbine generator) ready with a reduction box with an output of 3-4k rpm for real cheap. That would make an amazing engine swap
Agreed. A jet powered car would be great. Add fine heated seats, and modernize the interior of a Lada with 2020s tech, and the Luxury Business Jet Lada could be made. :)
The amount of angle iron, and square tubing is magnificent :) .. you can tell where the guy with skill stopped and the guy wanting to get to the pub as soon as possible started :) .. Wild fun!
I like the rare engined Porsches too Jolene. The Airflow Mopars were cool. I love art deco style cars.
I'm really glad you got this to work! Hope you do a part 3 in the summer!
I love that these are translated into English. I used to watch when they weren't and still loved them then!
Dog chasing it's tail 😂😂😂
Absolutely a great video, glad you made a part 2 please keep them coming 😂
the constant spinning reminds me of this one game of a spinning car that was popular a while ago.
Garage 54 rocks! ALL success in 2024" ❤🤙💪🇨🇦
Solid!
Top KEK!
Peace be with you.
That's so wacky and I love it!
RIP Lada. We had fun!!!
I love your videos!!
I’m convinced!! Them Lada engines are bulletproof!! Holy smokes! They tortured that car, the body was collapsing, but the engine kept on going!👌🤣👍that was awesome!!
I haven’t watched the video yet, but I’m already laughing lol.
They should bolt the rear end to a spinning thing / bearing (Like a Merry-Go-Round) and see how fast the car will spin around hahaha
You beat me to it.i just commented this😂
I'd call that a 110 percent success.
Look like a fun ride😅
Well it looks like you got all you can out of this one. this lada paid with its life. good fun guys keep te vids coming.
Could you turn the engine around and attach the wheel to the output of the gear box allowing you to use the clutch and gears ? Love the show
Here's an idea I got from your restricted exhaust video: make a giant flute/tin whistle and attach it to the engine's exhause system. Bring in an orchestral musician to play your theme song on it!
Luv it,how about putting swivel wheels in the front and independent breaks in the rear.
Love your videos!
take the rear diff out, and extend the prop shaft..
then add one wheel at the back HAHA
you will have gears and clutch too then LOL
and some weird counter steer with the front? :p
Weld the input of the rear diff so the car will stay in place
Exactly!
Maybe you should add shock absorbers, so that vibrations will not be directly received by the chassis and it will not damage the chassis structure of the car. The reduction support structure must also be further strengthened in the front chassis area. And the axle of the gearbox should not wobble, it must be made more centered
Cheers 🍻 From 🇨🇦
I hope there’s at least a kill switch in there lol but knowing these guys I doubt there is 😂
such a metaphor!!!!!
Now i wanna see one with the rear diff connected!
Congrats on getting it to work!🎉 Now strengthen the frame and have a competition to see who can get the highest rpms on a smooth surface.
Put "Outriggers" on the rear end... on the sides to keep it from flipping over.
An idea, install a pressure plate the opposite way, and try to drive the vehicle. i.e. attach the clutch to the engine and then attach the pressure plate and flywheel to the gearbox spigot shaft. i once read that it's done the common way to keep the inertia down for easier shifting.
If you were to do this again in the summer, i'd extend the rear axles to widen the track of the car to help it from flipping.
rotor flex, reminds me of my triumph vittesse. miss that car
time to mount a huge fan to that front hub to shovel snow to the side
like those huge trains in Finland that have huge rotating shovels on the front to clear snow
Make it so the front wheel can point ahead as well, so you can drive straight ahead, and spin in circles.
You'd make a fortune as a taxi driver in that car ! 🚖👍
Almost no power loss!
That is awesome, but I will suggest using centrifugal clutch
Looks fun, how much the entrance ticket ?
How about to make rear crank-wheel drive with fully working front steering? Try to make driveshaft from reduced output in front under car to rear wheel. Or simply direct from gearbox, but only to one wheel with 90 degrees rotation instead of rear axle ;)
"Just a good old boy".
Last challenge. Make that wheel somewhat steerable lol
The structure would have been fine with two beams coming from the chassis
You could have made it have a "clutch" of sorts by having the top diff be an open wheel (non lsd) and on the side pointing up add a brake rotor and calliper, press the brakes for that one and it would force the power to take the other path to the front wheel.
Poor car is like, ' put me out ot my misery already! ' 🤣🤣🤣
this is making a round trip between nowhere and nowhere.
That firewall IS the suspension. I'm surprised that gasketed windshield hasn't evacuated.
5:54 Ah its soo rare see Vlad sooo happy:):)
Hahahah do same with rear wheels and add few on side to prevent falling on side.
I love it lol
Next time try to lock up the left back tire so the car can go around and around
That car could be used some more, just jack up under front of the sills on both sides, jet a big mechanical jack and put it horizontally in the door frame and jack it up till the car is straight, shut the door, weld it shut and use one of the back doors to get in instead.
TRY THIS.. between the rear axle centre... mount a stand that can spin the car and keep the car in 1 spot...
Should get a lot faster turning ❤😂😂😂😂😂
Some lunch trays under the rear tires this would do perfect 360s.
Maybe a centrifugal clutch brake drum drive in the wheels hub 😉
Lada tilt-a-whirl
Say! Have you guys ever taken a rear axle, point the input shaft flange vertically, make a trailer hook up perpendicular to that, bolt a seat to the input flange, tow it and see which one of you can ride it longest without puking??
Should try an input shaft to a torque converter to an outputshaft
I love hearing you laugh like a school girl 😅
It must se be so much fun doing these experiments. Especially when they're successful,
It would be interesting to see a rear wheel version that is front wheel drive. Then you could move by applying power and steering angle to the front wheels.
You should do this experiment again in the summer to see how fast you can make the car go.
Nice
By the end it looked like it had reverse Lambo doors 😂
Ferrari has developed something like this on their AWD FF V12 model. The front wheels are powered directly off the front of the crank via a diff u til you put it to 5th gear then it disconnects becoming RWD only.
Hahahaha 😂 that is hilarious!!
Test IDI diesel injection lines made out of steel brake line, or NiCopp. I’ve always been curious if I can make my own injection lines at home in a pinch.
Maybe you could connect a wheel to the tailshaft at the back!
"In 300 feet turn right"
- I can't
WOW, the driver's side is severely collapsed & bent!!! 🤣
Damn Lada fathers are telling their kid Ladas horror stories about garge54 at the campfire... :D
Great for doing donuts.
As a mechanical engineer, all that bracing in front is about to make my head explode. We call that "hillbilly engineering." Just keep throwing metal at it. No particular plan other than to keep it from falling apart. I get it though. For something like this, I'm not gonna sit on the computer designing and testing the necessary bracing to hold and control the load. Some angle iron, a grinder and a welder. It's a Russian car, so a bottle of vodka as well.
Needs a cutter brake on the back left corner
Some suspension in front would help for version 2
Notification squad Have a nice weekend!🔥🔥🔥
Just need bigger studs on the tire and it'll be fun. Maybe 2 tires? 😄
I was hoping the windshield would pop out...😃
what if you were to try putting the single wheel at the back and keep the two normal wheels up front. There seems to be too much mass with the engine to get it spinning fast but if you were to be only turning from the rear, the engine would the over the 'pivot point'
How many posters must I buy to get platinum piston content?
Omg that would be great for a Vodka party