BMW G01. Front end restore. Ремонт переда.
Vložit
- čas přidán 24. 09. 2022
- Hi all. I did not repair cars without the right parts, but I was persuaded. Watch the video and you will see for yourself.
Всем привет. Я не ремонтировал машины без нужных запчастей, но меня уговорили. Посмотрите видео и сами все увидите.
Ссылка узнать Размеры /Link for Dimensions
/ 513924642275747
#bmw #bodyrepair #ремонткузова - Auta a dopravní prostředky
I own this car now. When I bought it I knew it was damaged, I saw the pictures (the same ones from the beginning of this video), but I didn't know how the bodywork was repaired. After looking this video I can only say GREAT WORK!!! Of course, the car has a TÜV certificate after reparation. After the complete repair, the car looks amazing and looking at it, no one would even guess that the car has been hit. All new parts have been added, and the engine has not even been touched by the hit, so everything is brand new. After almost a year of driving this car and overall 14000km, I can confirm that the car is in excellent condition, that it drives well, that there are no vibrations during driving, braking or turning, nor engine or electrical errors etc. and I didn't notice anything strange so far. Very good, actually a great driving experience and if I didn't know the car had been hit I would never have guessed it. The car is a 2 l petrol engine with 252 horse power - original. In the meantime, I chipped the car with a German DTE Systems tuning box and raised it to 305 horsepower and 430 NM and I am very happy with the final results and with the car in general. So I can just say one more time - GREAT WORK!!! Google drive photos of the car - drive.google.com/drive/folders/1-N2oo_Y6567_7mT_pPhs037-uKrbeL5R?usp=sharing
😊👍👍👍👍👍
OMG ! That car now has the structural rigidity of wet cardboard !!!! Splicing / heating / pulling !!!! Cars shot !!!! Looks great
Pretty sure they will sell to other part of Middle East as nothing happened to the car.
как всегда работа на высоте дай бог вам здоровья и сил 🙏✊✊
Высший класс, смотреть на такую работу одно удовольствие.
you are professional
Удачи вам Артур. Отличное наглядное пособие по ремонту. Уровень!
as always beautiful work
Great to see a craftsman and a Genius at work
Идеально всё сделано!!!
Молодец
Бог дал вам хорошии дар)))
Шикарно. Вот это уровень 👍
Very nice work and beautiful video very nice 👌 👍 👏
Отличная работа,успехов .
Хароша работа , Уважение за све от България
Wooo este señor Arthur es una gran persona espero y le herede ese talento a alguien más. Saludos de un salvadoreño 🇸🇻 en usa siempre miro sus videos 👍.
Soon, we will say :it’s simple like Tussik! Great job 👍👍👍👍
Outstanding job Arthur
Артур, всё как всегда чётко 👍
The Master BodyWorker
24 hours only? You are a master !
Great job, hard hit, alot of work,thank you from New York city
Excelente trabalho Arthur 🇧🇷
Siempre excelentes trabajos y muy didàctico...
Падхады дарагой, машин нэ бит, нэ крашен, Макс Шелков проверял - Артур нэ трогал.
Спасибо за ваши ролики, всегда приятно смотреть как вы работаете.
Impresionante trabajo! Saludos desde Mallorca 👌
EXELENTE. MAESTRO ARTUR... UN FUERTE ABRAZO..... GRACIAS BUEN TRABAJO.... CDMX MÉXICO...
РЕСПЕКТ
Всегда смотрю класс 👍
Bom trabalho na BMW G01.
tnx for the video
Маэстро 👍
Мајстор је мајстор!!!
Now that is some clean suspension there. It would seem this is a very low KM vehicle.
Artur you simply the best 👍
Круто 😊
Молодец.
Dobro uradjeno BOLJE nemoze biti!!! Samo to vise nikada nemoze biti ISTO, jbg, nedaj Boze nikome. POZDRAV 😱👌👋👋👋🔨🔨
Selamlar Arthur süper bir iş çıkardın eline emeğine sağlık süper olmuş bol kazançlar
Fantastic as always Arthur when it comes to body rebuilds!!! However, next time jack up the hub / spindle to simulate the correct ride height before you tightening the bolting to the suspension towards the frame. The hydro bearings in the caster rods will premature wear out of not......
Super robota ☺
Długo Tesli nie robił zapowiada się ze będzie?
Skubany dobry jest 👍
well done 3 days, good job 😊👍
Bravo Arthur..
Greetings from California Arthur
Красавчик
I am Indian big fan sir ji
Salut Arthur c’est encore et toujours du très bon boulot 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Excellent repair video Arthur. You make a difficult repair look easy. 👍🏻👍🏻 🙂
Артур, привет! Респект за хорошую работу! Крепкого здоровья, удачи и много интересных проектов!
Привіт 👋
@@garagemasterua5521 привет, привет дядя Коля! Как у Вас дела?
@@user-VitaliePostovanu1401 все ок.
Спасибо
nice work arthur
Супер
лайк как всегда
👌✌👍
Лайканул
good job
Great video 😎😎😎👍👍👍
Я тоже ремонтирую G01 сейчас!Впереди я менял все и клеил!
👍
wonderfull
Bao đâm đụng, thủy kích,bao sử dụng...kkk 👍.
Welcome to Turkey
👍👍👍👍👍
Oh god, someone has already crashed the lci g01... Great repair otherwise!
👍👍👍👍
💪
👍
I guess that chassis rail was piece from the factory for a reason - looks a great repair but i wouldn’t want to be anywhere near it when its asked to do its job next time in as crash 🙈.
Also where you tighten suspension bushings the car needs to be under full weight. All those that you did up with it in the air and no engine likely have less than 20k km note until they will fail.
Totally agree. Looks great but man it also looks unsafe going forward.
The suspension will still be looked at by specialists.
Hopefully it’s Putins new car
I agree just the job for Putin, but anybody I cared for, not a chance
Dream on loosers...
your working sounds better than play music, I recommend not playing music in videos. music disturbing.
😊
👍🏽
Лонжерон сломался! Может BMW проконсультироваться у Morgan и делать их из ясеня? Все равно прочнее будет!
Артур как всегда все отлично сделал!
😊
That rail should not have been spliced like that, that’s not even a legal repair. The entire rail all the way up to the fire wall should have been replaced. This is a dangerous repair and the vehicle will not hold up the same way if it’s ever wrecked again.
Good afternoon Arthur, that passenger side frame rail looks great. Perfect alignment for the engine cradle. Thanks and take care. Good luck.
👍😊👌
Salud vecino
Numer trzy Pozdrawiam serdecznie z Polski
Как всегда секс для моих глаз!!! Спасибо за видеоработу!!!))))
Надо в ученики идти к вам Артур
привет, Артур, как обычно хорошее видео, и мне кажется, что ты несколько лет худеешь 😁😁из Квебека, Канада.
Стараюсь 😊
⭐⭐⭐⭐👏👏
Дожили. Лонжероны,от которых зависит всё ,наша жизнь в том числе,теперь из алюминия и клея. Не хочется ездить на этом произведении западного автопрома. Артур как всегда на высоте. Как только терпения хватает этот хлам реанимировать? Дай бог тебе здоровья на долгие годы.
Ну тогда ездий на своих ржавых Тазах
Ахах, дилетант))
Открою тебе еще один большой секрет, но никому не рассказывай, самолеты тоже из алюминия и заклепок так что не вздумай летать)))
@@garagemasterua5521 Точно.Как ваши дела? МММ.Жду ваше видео,долго ждать? Дякую
@@user-ux2hn2cx9y Привіт. Вже трішки матер"ялу назнімав, треба змонтувати, але часу не вистачає.
Hey Arthur I always watch your videos trying to see how you clamp down the bmws without the special clamps, did you make custom attachments to go inside the jacking point holes. Can you please show me the clamp you use.❤
olá Arthur aqui e Noe do brasil na bahia🇧🇷
Работа мастера
Welcome home,Arthur!
Hope you and your family had great holidays in Turkey.
I know,there is nothing you can not repair,master of bodyworks.
Great idea with the reinforchments for stronger connection of the right rail,respect.👍👍👍👍
Greets and paka.
Gerd from Germany
Thanks Gerd
Elcio Carlos Brazil,Arthur maravilhoso trabalho,muita saúde p vc e tua família.
hello first
what kind of disc are you using on that cut off wheel where there aren't any sparks??
He's cutting aluminum
Сбольшим уважением к вам и вашей работе .Вопрос вы сваривали лонжерон полуавтоматом.Лайк от души ставлю всегда перед просмотром
Да. Приблуда для сварки алюминия.
Хорошего дня видео как всегда на высшем уровне, можете сказать каким сверлом какой фирмы пользуетесь для удаления точечной сварки???
Есть коронки (китайские) либо с кобальтом переточеные.
Гарна робота,яка фірма лінійки кузовної яку ви використовуєте,дякую
El tortazo
Why did you fit a plug in hybrid front fender ?
This is a different fender, they brought it in to try it on.
Arthur welding Machine please?
Priviyet can u explane haw to restore airbag please my car have accidant in front and all airbag is off ...... supasiva
Hi Arthur, what is the chemistry you put before the solder after welding. Very good work, congratulations
This is tinning paste
@@tussik01 Thanks for the quick reply i found wurth and felder great help good luck and health
А где ссылка на размеры ?
Извини, добавил
👏
👩🔧
🚗
🇧🇷
Arthur. How many amperage is machine for welding aluminium? 250 amperes ?
Written 200
Dos pes espadas en la entrada unidad supermarket
At 9:00 how do you hide the rivets on the rails and make the surface look so smooth?
These are rivets with hiding heads, like self-tapping screws for wood.
@@tussik01 Thanks Arthur! 👍
Заказал себе такую горелку с катушкой. А вот теперь думаю будет мой опарат варить так. Гнездо для подключения есть. Апарат должен поддерживать режим Ас _дс или достаточно поменять полярность. Каким апаратом варили
Sherman он и для стали и для алюминия
Rail o şekilde kuvvetlimi tartışılır.. Bence direk hurdaya ayrılmalı..👻🤙
Артур, добрый день. Скажите пожалуйста, где взять размеры на ремонт? На каком-то видео вы говорили. Очень трудно найти размеры.
facebook.com/groups/513924642275747
Arthur please help me give dimensions fiat tipo egea 2017 1.4 95km hatchback front end
Hejka Artur