My lawn tractor front end loader
Vložit
- čas přidán 20. 07. 2022
- My lawn tractor front end loader Thanks to other CZcams videos I was able to build a front end loader for myself. Some of the main components below
REAR Cylinder
2x16x1.125 Double Acting Hydraulic Cylinder Lion 661330 9-12282-216
Front Cylinder
Maxim, TC Tie-rod Cylinder, Max. PSI 2500, Bore Diameter 2 in, Stroke Length 10 in, Model# 218306
Controller
www.ebay.com/itm/154372481627
Hydraulic Directional Control Valve 2 Spool, 11GPM Double Acting Cylinder BSPP
Pump
NorTrac Bi-Rotational Hydraulic Pump, 6.3 GPM, 1/2in. Dia. Shaft, Model# CBS6-F6. 3SS
Great Job 👍!!!
Thanks so much for your video on your diy fel. I just bought a '77 bolens lawn tractor (h14xl), which came with a 38" snow blower, and a 26" bulldozer blade. Both are hydraulic, and run via the hydrostatic trans.
I have a bucket kit that is missing several pieces, but bcs of your video, I am in the process of making a front end loader very similar to yours. The exception is that I'm using 4 HD 300# electric actuators to lift the bucket, & perform the dumping function. Your information has been very very good, and has helped me with the frame building process.
Thanks for the info and best wishes.
Very helpful, thankyou.
You're welcome!
Thank you for this video it has very much helped me move forward with my project ,i very much appreciate your Information.👍
Glad it helped
I have always wanted to do this and it looks like you have done a fantastic job. What spec is the hydraulic pump and cylinders if you don’t mind.
No I don't.
Lift
2" x 16" x 1.125" DA HYD CYL
New. Double acting hydraulic cylinder. Lion model# 661330
SPECIFICATIONS
Double Acting
Bore x Stroke 2" x 16"
Barrel Thickness 0.1875"
Gland Retainer Tie Rod
Pressure 2500 PSI max.
Rod Dia. 1.125"
Ports 3/8" NPT
Retracted Length 26.25"
bucket
Model Number 218306
Type Double-Acting
Bore x Stroke 2'' x 10''
Pressure 2500 PSI max.
Rod Dia. 1-1/8''
Column Load 7850 lbs.
Ports 3/8'' NPT
Retracted Length 20-1/4''
Item# 47350
Brand NorTrac
Manufacturer's Warranty 1 year Limited Warranty
Ship Weight 6.0 lbs
Product Type Pumps
Max. PSI 2,500
GPM 6.3
Shaft Type Extended
Shaft Diameter 1/2
Stage 1
Material Cast Iron
Weight (lbs.) 6
Thank you very much for the specifications!😊
What type of metal tubing did you use on your bucket for hydraulic lines
Brake Line, 3/8" X 60" Steel from Del City. Rated at 3000 psi my pump is rated at 2500 psi
2x2x3/16 and 2x4x1/8 inch stock.. What pump motor specs or model and same for the hydraulic cylinders and finally teh control box for up /down and bucket tilt up / down. This info would be nice
REAR Cylinder
2x16x1.125 Double Acting Hydraulic Cylinder Lion 661330 9-12282-216
Front Cylinder
Maxim, TC Tie-rod Cylinder, Max. PSI 2500, Bore Diameter 2 in, Stroke Length 10 in, Model# 218306
Controller
www.ebay.com/itm/154372481627
Hydraulic Directional Control Valve 2 Spool, 11GPM Double Acting Cylinder BSPP
Pump
NorTrac Bi-Rotational Hydraulic Pump, 6.3 GPM, 1/2in. Dia. Shaft, Model# CBS6-F6. 3SS
This is very useful. I was wondering what cylinders and pump to use
I like the loader. Can you tell me what size are hydrualic cylinders. If I wanted to buy some. How would I go about knowing how to order the right ones.
SPECIFICATIONS
Double Acting
Bore x Stroke 2" x 16"
Barrel Thickness 0.1875"
Gland Retainer Tie Rod
Pressure 2500 PSI max.
Rod Dia. 1.125"
Ports 3/8" NPT
Retracted Length 26.25"
bucket
Model Number 218306
Type Double-Acting
Bore x Stroke 2'' x 10''
Pressure 2500 PSI max.
Rod Dia. 1-1/8''
Column Load 7850 lbs.
Ports 3/8'' NPT
Retracted Length 20-1/4''
How big is the tank?
Hydraulic tank is one gallon. Fuel is original
What HP is the engine?
17
Using counter weight is one thing but your stamped frame was not design for that and could fail badly. I used a 3/8" X 2 " strap to fish plate mine from back to front.. czcams.com/video/fEYf0EkZhhM/video.html
I later added a 1/4 thick channel inside the frame channel. I also but a 3/8 x 1 1/2 strap across rear differential to the frame bolts that attach the transaxle with added splines to support the axles. I broke the the original axle housing.
This is Battry opreted??
No
Great Job 👍!!!
Great Job 👍!!!
Thanks!