FIVE TECHNIQUES WITH LATHES THAT ARE NOT TEACHED IN SCHOOL
Vložit
- čas přidán 19. 03. 2024
- This video shows several lathe techniques that are not taught in school, the reason it is not taught is because this method has been forgotten with the advent of milling machines.
- Věda a technologie
Top markotop tehnik nya
Keren parah sih ini ilmu nya , pekerjaan yg seharusnya di kerjakan dengan mesin miling di garap abis di mesin bubut .
Гений чувак. Просто гений. Красавец!
Mesin multifungsi apa kreatif nya yg tinggi, salut ❤
Vamos arriba hermano Messin excelente como siempre lo tuyo y te envío un fuerte Abrazo para ti y todos los hermanos Indoneses José desde Florida Uruguay ❤❤
Terimakasih banyak saudaraku Uruguay ♥️
@@Yantoo ❤❤
Do you know which country this is? I was thinking the Philippines. 😊
muantap bang..
Anda memang ahlinya mungkin anda jugabisa bikin bor fris/mesin Milling sendiri 👍👍👍
Assisti até a solda no torno, isso acaba com os rolamentos e respingos no barramento.
Ничего необычного, токаный станок он в умелых руках весь стоночный парк заменяет.
Once in our formula student team, an axle in our lathe broke. I used the milling machine to turn a new axle. It worked very well and the tool was very stable, giving great surface finish.
Brother Yanto, you never fail to make my day. Watching you manipulate that lathe like it is an extension of your hands. The milling segments alone are worth their weight in gold. Many of us have a lathe but don't have a mill. You regularly demonstrate that milling on the lathe is far more than a concept.
All is not perfect though.. In my mind when welding on the lathe I would do everything and anything possible to avoid connecting the ground electrode to my spindle. Seriously, there were other, more direct options than connecting it to the rear end of your spindle. I would do anything possible to avoid having welding currents passing through or getting near my spindle bearings.
My other, knit-picky complaint is the segment at the cutoff wheel. You just finished machining a hydraulic fitting on the lathe. You then took it over to your abrasive cutoff wheel to separate the waste end. Problem is, the cut off section was the hydraulic fitting that you just machined. When the wheel cut through the waste the finished part fell to the concrete below. Yanto, come on buddy, there should have been a wood or other soft surface below that cutoff.......... Capice?
I still love ya!
Wakodahatchee Chris
Lo que no te enseñaron en la escuela ,es que no hay que soldar arriba del torno !!
Тем более что второй провод подсоединн не к детали а к станку,ток проходит через подшипники а это ОЧЕНЬ ПЛОХО.
Nice ur work.👍👍 milling and drill work all include only lathe machine. Depending on ur lathe attachment iam also lathe cnc machine worker. I also some vedeose put some different machine 👍👍
Kreative tanpa batas mantap
A pleasure to watch your skills at work 👍🇬🇧
Thanks brother ♥️
I'm not easily impressed, but this young man has impressed me with what he is working with and quality of work he can achieve. Great job!
There is a reason they don’t teach this in schools.. it’s a GREAT example of what not to do… 43 years in the trade and if you did these in my shop you wouldn’t last long…I’d fire you
I have never thought of doing this, thank you so much.....cheers from the US, Paul
Thanks Paul 💝
Teacher Yanto. 🤗
Best regards 🙋♂️🇩🇪
😁😁🙏🙏
Excellent!!!
لذت بخش هست کارهای شما🙌 انشاالله سلامت وپایدارباشید🤲🙏❤️❤️❤️🌹
Terimakasih banyak saudaraku ♥️
Teached = Taught
Что творит босоногий, просто Кулибин с токарным станком, 90% токарей половины не умеют чего он делает :)
👍 nice work my friend!
Nice video, thank you :)
How do you guys drill without spot drilling or center drilling first is beyond me. You're even doing it on a round piece. I would do the same even on a mill and a square piece, the drill wanders like crazy if I don't spot drill first.
maybe they are using a split point bit to do the first hole, I will have to go back and look close...
watched the second hole start, looks like a split point that has been resharpened, but they do not show for long....cheers from Florida, Paul
Kelasszzz abg nyaa 🫡
Ini pekerjaan untuk konten
Kenyaan dalam bengkel bisa.dikerjakan dg.mesin lain
Cool work thanks 👍
♥️♥️🙏
They taught us, not teached.
Такой метод обдирки не сработает, если заготовка была из углеродистой стали и ее отрезали газовым резаком. Можно так сделать только тогда, когда эта сталь - пластилин
Сталь три!
You are right. I never learnt that in school.😂
You are amazing
Thanks brother ♥️
Great job mate
Thanks brother ♥️
Que pobreza, no tiene una mesa de trabajo ni una perforadora de mesa, tiene que trabajar en el suelo y sin zapatos
Tutor struk up askruk bang
Why 4-jaw? This job can be done more simply and accurately with 3-jaw.
Keren bang tekniknya❤❤
Maturnuwun pak Utomo
Ijin tanya. Alamatnya dimana bang. Pengin main
ماشأ الله تبارك الله
مبدع بي ابسط الامكانيات
اهنيك واتمنى لك التوفيق
Aamiin.. terimakasih saudaraku ♥️
❤
я считаю сильно заморочисто, только в редких случаях такое применять, если это колым который стоит того, а так нет смысла.
Wow excelente tornero, una máquina para múltiples operaciones, un fuerte abrazo desde Perú y bendiciones de nuestro Señor.
Terimakasih banyak saudaraku Peru ♥️
Братан був би ближче подарував би тобі два індикатора а так привіт з украіни мирного неба і божоі благодаті ти супер
👍
taught in school.
Like you.what nationality.🤝
Catched, caught
Teached, taught
Watched, latched, batched, hatched, patched, matched... OK
Just having fun
😎😎
Thanks brother ♥️
@@Yantoo Syntax can be a quirky thing when applied between languages. Syntax is largely cultural, what is proper with one culture can seem odd when applied to the language of another. However, by listening with an attentive ear, meaning is generally clear. Catched and teached seems to me, should be perfectly acceptable.
Example: "I was sure the locking mechanism was properly catched."
I'd get points taken off in English class for that one.
Be well my friend.
😎😎
Machine Mechanic has some serious machinist's skills.
😎😎
Apparently, neither is grammar.
Hello bro how can i contact you?
Hello bro, how can i contact you?
Kaplinn aralarına lastik koy
Купите пацану отрезных резцов.
Terrofying, you can't Do that on the lathe.
Ada kontak wa mas?
Not teached?
車床的軸承再哀嚎了
Kok gak pake sarung tangan kulit bro, ngeri gram logamnya
Justru kalau sedang pegang mesin bubut manual SOP nya tdk boleh pakai sarung tangan
Pahat bubutnya bisa dibelikah?
Beli di online banyak bang
Ззззззз8888888шш@@Yantoo
"Teached"
Really...?
😁😁🙏🙏
Bang saya mau nanya kenapa sebagian besar tukang bubut gak mau ngebubut benda yang terkait dengan senapan angin semisalnya saya mau ngebubut laras atau chamber di tukang bubut tapi gak mau kenapa ya bang🗿
Ribet mas, butuh ketelitian dan juga ada larangan bengkel bubut membuat senapan angin call 5,5 ke atas..
⁰😊😅@@Yantoo
Tidak semua kang bubut menguasai hal yang ko sumen inginkan. Lbh baik tdk dripada merusak
Resiko bang.
takutnya disalahgunakan mas. terkait part senjata baik api ataupun angin bagaikan berdiri ditepi jurang.
Никогда не понимал 4 х кулачковые патроны, 3х кулачковыми можно сделать практически всё...!!!
甚麼東西有头沒尾