Anything you do is worth watching bud. Check out Andrew Camarata on CZcams he works on stuff like this all the time and check out the shipping container castle really cool stuff.
Car guys always work on more than just cars 😉 In the military if you can read a manual, apply good mechanical knowledge, and crank on wrenches, you can repair anything lol. I was a vehicle mechanic, but I worked on generators, heavy equipment, light equipment, heaters, air conditioners, you name it. I enjoyed this video!
Good to see old equipment being rehabbed. Brings back good memories, as I worked for CLARK EQUIPMENT , back in the mid to late 70's . I worked on many MELROE CLARK Bobcats. Definitely enjoy seeing this type of video along with your other content. Stay Real.
Good Video 📹. The reason why I subscribed to your channel is for the Hot Rod. But over 30 YEARS AGO I was working on the BOBCATS And other Industrial Vehicles. So I can Relate. #STAYSAFE. #KEEPWORKING.
Hey Brent. I'm really into anything other than old cars, old trucks and young women. This video was better than watching cooking videos. Thanks for sharing.👍👍🍁
thank you for your video, I am in France and I have the same BOB 610, impossible to find instructions, help to repair, the transmission belt I was able to find it in STATES thanks to an American post, from you! Many thanks again, Keep posting, on the transmission if you have, the braking?🙏🙏🙏
We look so forward to each of your videos. My husband has two Bobcat loaders he uses to make a living so this was especially cool. He says sometimes it’s easier to work around some of those areas if he takes the tires off. You’re not afraid to work and fix anything. Great as usual. Waiting for the next one!! Enjoy your instagram also.
Yeah man its all good to know i fool with some of that stuff too never know when stuffs goin break glad you guys are making head way on rollies lil truck.cool later man.
I am pretty sure that you watch Andrew Camarata and he just did a drive motor on the rear sprocket opening my eyes to bob cat. I know this is apples to oranges but he brings up the difference in builds on say kamotsu or other brands and how much better designed with stronger better less chance to fail and must agree. I think your subbed to him. I don't think that you have as much rust as the ocean states of the usa or say ohio and what not along our great lakes. So sad to invest say forty thousand for something and it three to five you have a dissolved pile of scrap. I will watch you play fifty two card pickup Brent, I like the stuff that you do in general. Yes I did like it
Hey Brent , Greg here. I don't know much at all about Bobcats . Great job on that repair and the ...just get in there and do it . Once again ya just dun diddit . All I can say is Lori's just started making a cloth mask out of a dark blue silk tie she bought at Value Village today . She has already made a yellow lacey one for the bride . One of her brothers is getting married in a few weeks. Sofar she's made over 500 cloth masks since this virus thing got going . I gotts to go change the oil in the lawn mower and cut da grass. At least they can have 50 people at their outdoor wedding. Is the Tim's cruz thing happening again this weekend ? We stopped by to visit my Dad and Mom earlier today .He's the reason the '67 Chevelle convertible came into the family when I was in grade 2. Tomorrow Dad would have been 107 yrs old.
I googled that Corner Cafe the hamburger and onion rings sure do look worth the drive or "it's worth the trip " sloga. We got a message from MSRA that Blumberg Sports and Golf Place is inviting for a cruz today . The food place there won't open until June 1st but you can hang out and visit . It's between Assiniboine Downs and Headingly. A much closer drive for us folks. Back to yard work for now ,thanks for the info Brent .
Yeah man I enjoyed the video I like the occasional weird repair video. I've operated a lot of Bobcats but never saw the inside of the side case like that. I used one moving scrap sheetrock from the building to the dumpster and if it tore up I just called someone to call the guy to fix it because it wasn't mine anyway but put several miles on it or should I have said hours 😂👍
ive made that repair uncounted times with frozen fingers those cam eccentrics are not that expensive @ bobcat i've wrecked many and found they'll strip with new tires also the fine thread castle nut strips out i always tack welded it. helps to do turns low speed on the drive sheave. drive belt is expensive on this machine. they have rebuild kits for all the hydraulic cylinders they're not hard to rebuild also rebuild kit for the hydraulic drive sheave. if the points & distributor cap start burning up it's time to set the valve lash. i had a set of metal tracks but it wore the drive clutches too fast so never put them back on. time to time blow out the alternator with compressed air or the regulator burns out. ive snapped joystick levers in half, hydraulic cylinder shafts in half, boom snapped in half, rolled bobcat end for end upside down with me in it and fan cooled wisconsin engine catching fire. important to rtv silicone the side covers because when you power wash the skidloader water gets in turn to ice and it wont move no matter how hard you push those joysticks bought the knipco heater just for that. the axle seals leaked many many years bought hydraulic oil by the 55 gallon barrel then when the engine blew up had bobcat dealer replace all 4 seals no more leaks. almost 30 years fighting the 610 on a small dairy farm my 853 is like a gift from god
Hey you know if you ever need song is specifics there is a group on Facebook Melroe Bobcat Owner of America it’s all about these type of machines M500 and 600 Couple days ago we got a video of how to adjust the coaches just in case good video man
Nice fix !!! I also have an old Melroe 610 that I totally restored... they are not fast machines but they are perfect for a do it yourselfer like me.. I have a playlist on my channel with most of my Bobcat rebuild videos in if you wanna check um out ?
You need a bobcat on a acreage/farm. Aabsolute must have! I got a old gehl,about the same shape as yours,prob a bit worse. Crazy expensive to replace for something better so I do the same thing,fix her up again and again.
Did you get the clutch pin from P. Thuening in Minnesota? I have a Melroe Bobcat 610...I re-built it from a rusty shell I found in a field...The entire drive system was chopped out of it, I had to order everything from him....great prices but of course I got totally hosed on duty charges. since I'm in Canada.
Great job, thanks for the video. I have a bobcat 610 and have been trying to replace the hydraulic hoses. A couple of the will break free but the majority feel like I will destroy the hex nut, any advice? Thanks again, JB San Diego.
Hey do you have link's for the parts on this I have the same problem with mine on both sides I changed the clutches and did not know how tight to put the adjustment nuts it drove maybe 40 ft and has been there since I would be very grateful for any links to part's
he bien je crois que j ais trouver un problème une piece que j ais trouver de casser et un bearing manquant je vais aller voir sur le chaff well I think I found a problem a part that I found to break and a missing bearing I will go and see on the shaft ,,, merci
Do you guys like seeing repairs or odd stuff like this?
Halfass Kustoms yes
You film it I'll watch it, though not a real Bobcat fan, they are a booger to repair. you did well Brent Kudos.
Yes sir ! I enjoy watching you solve mechanical problems and fix things. You remind me of my dad. He could fix anything.
Anything you do is worth watching bud. Check out Andrew Camarata on CZcams he works on stuff like this all the time and check out the shipping container castle really cool stuff.
I like all things by
Halfass Kustoms.
Love seeing how old equipment gets repaired, it's real easy sittin' here watching & someone else is doing the work!
Car guys always work on more than just cars 😉 In the military if you can read a manual, apply good mechanical knowledge, and crank on wrenches, you can repair anything lol. I was a vehicle mechanic, but I worked on generators, heavy equipment, light equipment, heaters, air conditioners, you name it. I enjoyed this video!
Good to see old equipment being rehabbed. Brings back good memories, as I worked for CLARK EQUIPMENT , back in the mid to late 70's . I worked on many MELROE CLARK Bobcats.
Definitely enjoy seeing this type of video along with your other content.
Stay Real.
I like any repairs. Old cars or equipment. I often wondered how a skid steer works. Let’s also see the seal repair.
Proper working equipment around the shop is always a plus
Enjoyed the video. Never seen a bobcat apart before. I would have been lost trying to figure that out and I'm a retired mechanic.
haha I wasn't sure what I was getting into either but it worked out in the end :)
Resembles clutch plate from automatic. Was quite interesting, a whole lot more than fixing my toilet last week. Keep it up Brent!
As a skid steer owner, and a general enthusiast of all thing mechanical, or auto body... keep it coming .
Your content is beyond most!
Good Video 📹. The reason why I subscribed to your channel is for the Hot Rod. But over 30 YEARS AGO I was working on the BOBCATS And other Industrial Vehicles. So I can Relate. #STAYSAFE. #KEEPWORKING.
Thanks Dennis!
I enjoyed it. Nice Change-Up. It's all part my shop life. 👍
Jack of all trades Brent!
I'm sure that bodcat is a very important tool ,in building Hotrods .good to see its all fixed .
Learning something never hurts anybody thanks 😊 take care
Hey Brent. I'm really into anything other than old cars, old trucks and young women. This video was better than watching cooking videos. Thanks for sharing.👍👍🍁
I used too work on forklifts back in the day. brought back memories of working on equipment.
Thanks for sharing, yes very useful!
Thanks man!
I recently bought this model so all things Bobcat is great. Thanks
Hey, works for me , need something to get them parts out of the field, good life .
Nice job... well done. Stay safe.
Mr. Fix it, Great job Brent.
thank you for your video, I am in France and I have the same BOB 610, impossible to find instructions, help to repair, the transmission belt I was able to find it in STATES thanks to an American post, from you! Many thanks again, Keep posting, on the transmission if you have, the braking?🙏🙏🙏
Great video. I have an m700
I really like these units as there cheap to run and kinda cheap to fix haha
All ways wondered how one of them dude’s worked! Thanks!
As long as your having FUN. Go for IT,,,,
We look so forward to each of your videos. My husband has two Bobcat loaders he uses to make a living so this was especially cool. He says sometimes it’s easier to work around some of those areas if he takes the tires off. You’re not afraid to work and fix anything. Great as usual. Waiting for the next one!! Enjoy your instagram also.
Thanks Pam!
Great stuff to watch, just for mechanical knowledge.
For your piece of mind, and because the machine also turns right...check the other side!!!
Just needs some flared rear fenders, and 32 roadster lights on the front, and ret to go.
Fun to see it all. I always learn something.
What the Hell... Successful Fix! Better than I could do! ...Newk from Kentucky USA
Always nice to learn something new, thanks
Yeah man its all good to know i fool with some of that stuff too never know when stuffs goin break glad you guys are making head way on rollies lil truck.cool later man.
Hey Brent iheard you say my name on.air when you were over at D D speed last nite but i didnt hear what you said after my name whats up?
Great video, I have a melroe 500 and found it very useful. Thanks for making it!
Is there nothing you won't tackle Brent? Great work as always Mate. Billy J...... Australia.
Love my 610 has a 1600 VW motor using it to build a mountain bike track on my property here in Western Australia 🇦🇺
The toys you got & get to play in ! Lol like it all man keep them coming
Thanks… info I needed, now to find the parts. 😉😃
Yes thanks Brent. I built parts for Clarke gear as a fitter turner apprentice in 1980s.
Seems you know what your doing. Nice. Kiwi Sam
haha it's easier when you take video you can see how you took it apart make putting it back together easier.
That's funny you use a shower seat as a table. 😁
Whatever's Available,,,Works 😉😉😉
Just added a bit of knowledge about a bobcat...thx
I like videos like this Brent! Keep up the great work!
Yes it was a great video to watch. 👍
I am pretty sure that you watch Andrew Camarata and he just did a drive motor on the rear sprocket opening my eyes to bob cat. I know this is apples to oranges but he brings up the difference in builds on say kamotsu or other brands and how much better designed with stronger better less chance to fail and must agree. I think your subbed to him. I don't think that you have as much rust as the ocean states of the usa or say ohio and what not along our great lakes. So sad to invest say forty thousand for something and it three to five you have a dissolved pile of scrap. I will watch you play fifty two card pickup Brent, I like the stuff that you do in general. Yes I did like it
thanks man, yeah I watch a bunch of Andrews stuff
Subscribed. Great video. Just got a 310. Nice dog too!
Dang Good Job There Buddy, I Wouldn't Have Known The 1st Thing to Do, KUTAW n Have a Blessed Wknd Brother.
Mine broke today thinking same thing luckily got another 610 for parts to hard to get here in Australia
Hey Brent , Greg here. I don't know much at all about Bobcats . Great job on that repair and the ...just get in there and do it . Once again ya just dun diddit . All I can say is Lori's just started making a cloth mask out of a dark blue silk tie she bought at Value Village today . She has already made a yellow lacey one for the bride . One of her brothers is getting married in a few weeks. Sofar she's made over 500 cloth masks since this virus thing got going . I gotts to go change the oil in the lawn mower and cut da grass. At least they can have 50 people at their outdoor wedding. Is the Tim's cruz thing happening again this weekend ? We stopped by to visit my Dad and Mom earlier today .He's the reason the '67 Chevelle convertible came into the family when I was in grade 2. Tomorrow Dad would have been 107 yrs old.
no I don' t think the tims is happening but there is something at Cynthais corner stone cafe today though just north of the tims there.
I googled that Corner Cafe the hamburger and onion rings sure do look worth the drive or "it's worth the trip " sloga. We got a message from MSRA that Blumberg Sports and Golf Place is inviting for a cruz today . The food place there won't open until June 1st but you can hang out and visit . It's between Assiniboine Downs and Headingly. A much closer drive for us folks. Back to yard work for now ,thanks for the info Brent .
this is cool i like this kinda stuff! very interesting!
Yeah man I enjoyed the video I like the occasional weird repair video. I've operated a lot of Bobcats but never saw the inside of the side case like that. I used one moving scrap sheetrock from the building to the dumpster and if it tore up I just called someone to call the guy to fix it because it wasn't mine anyway but put several miles on it or should I have said hours 😂👍
Love it its different 👍👍👍👍
ive made that repair uncounted times with frozen fingers those cam eccentrics are not that expensive @ bobcat i've wrecked many and found they'll strip with new tires also the fine thread castle nut strips out i always tack welded it. helps to do turns low speed on the drive sheave. drive belt is expensive on this machine. they have rebuild kits for all the hydraulic cylinders they're not hard to rebuild also rebuild kit for the hydraulic drive sheave. if the points & distributor cap start burning up it's time to set the valve lash. i had a set of metal tracks but it wore the drive clutches too fast so never put them back on. time to time blow out the alternator with compressed air or the regulator burns out. ive snapped joystick levers in half, hydraulic cylinder shafts in half, boom snapped in half, rolled bobcat end for end upside down with me in it and fan cooled wisconsin engine catching fire. important to rtv silicone the side covers because when you power wash the skidloader water gets in turn to ice and it wont move no matter how hard you push those joysticks bought the knipco heater just for that. the axle seals leaked many many years bought hydraulic oil by the 55 gallon barrel then when the engine blew up had bobcat dealer replace all 4 seals no more leaks. almost 30 years fighting the 610 on a small dairy farm my 853 is like a gift from god
haha yeah we grew up with one of these on the farm but never had to do anything to it prob cause we never washed it though haha
Goes to show if your mecahicaly inclined you can fix anything. Except spelling. Hi Pablo. GOOD Boy
haha that I defiantly can't fix, I always hope google knows more that I do in the department haha
Different, but interesting!
Great job and video 👍👍🇨🇱
break it you seem to be fixing it LOL good welding i am just a stick guy so far
I'll bet your better at stick than I am haha
Bobcat Wheelies!!!
Hey you know if you ever need song is specifics there is a group on Facebook Melroe Bobcat Owner of America it’s all about these type of machines M500 and 600 Couple days ago we got a video of how to adjust the coaches just in case good video man
Ya gotta fix it all👍🏻😀
I’d watch you clean ur gutters brother I’m a contractor and backyard mechanic we build and fix everything here in Wv
Nice fix !!! I also have an old Melroe 610 that I totally restored... they are not fast machines but they are perfect for a do it yourselfer like me.. I have a playlist on my channel with most of my Bobcat rebuild videos in if you wanna check um out ?
You need a bobcat on a acreage/farm. Aabsolute must have! I got a old gehl,about the same shape as yours,prob a bit worse. Crazy expensive to replace for something better so I do the same thing,fix her up again and again.
yeah, at this point it owes me nothing haha
Where'd your Gilligan hat go? I miss that hat! lol
haha I always loose stuff and find it later like it's treasure.
Thanks for sharing Kool
All things mechanical are interesting.
hey hey you are a tiger to i am a stick welder 22 years
Did you get the clutch pin from P. Thuening in Minnesota? I have a Melroe Bobcat 610...I re-built it from a rusty shell I found in a field...The entire drive system was chopped out of it, I had to order everything from him....great prices but of course I got totally hosed on duty charges. since I'm in Canada.
Now you're good to do some yard work...lol
What is normal or abi normal ? Remember Young Frankenstein ? Or is that Frankenstene ?
lol ! ! !
Very good. A minha Bob cat está do mesmo jeito dessa aí estou precisando de fazer essa retifica, qual a medida padrão?
Im having the same problem, could you name all the parts you replaced and frol where di you got them? Please and thank you. Great video by the way
It is interesting, I have a 1982 model.. won't spin wont fill the bucket.. low on drive power
Great job, thanks for the video. I have a bobcat 610 and have been trying to replace the hydraulic hoses. A couple of the will break free but the majority feel like I will destroy the hex nut, any advice? Thanks again, JB San Diego.
What are you welding with?
Hey do you have link's for the parts on this I have the same problem with mine on both sides I changed the clutches and did not know how tight to put the adjustment nuts it drove maybe 40 ft and has been there since I would be very grateful for any links to part's
Hi, where do you located, I need your services I have an old the same bobcat with very similar issues, my doesn’t run fast just move very slow
What rim offset and tires did you use
It counts.
Fais um vídeo do comando idrallico como desmontar
he bien je crois que j ais trouver un problème une piece que j ais trouver de casser et un bearing manquant je vais aller voir sur le chaff well I think I found a problem a part that I found to break and a missing bearing I will go and see on the shaft ,,, merci
you are supposed to soak those frictions before install
What you using bobcat for?
I use it mostly to push stuff around the yard, old cars and what not.
well now, everybody knows your a bobcat mechanic, do you work on forklifts?
haha I have in the past when I had one
Sell you another 6:10 for parts I'm assuming it has a similar problem won't move
mabe you shood harden it by tiging it with a old drill bit i have seen it on utube
Are You Using A Different MIC The Audio Sounds Different In The Start Of The Video ???
Russ The Yank = USA
Yeah one is a go pro vs my other camera
Should soke those clutches first
Fix if it’s broke
Didnt tell how to adjust the clutches.
here is you tube address for harding metal tig welding with old drill bits weldingtipsandtricks
7 lol
Good job!!!