The BEST Way to Remove Bedliner

Sdílet
Vložit
  • čas přidán 7. 09. 2024
  • In this video, we test a few methods for removing bedliner, rhino liner, raptor liner, herculiner, monstaliner, etc. Like and subscribe if this content is useful to you! Thank you for watching.
    #garage #bedliner #paintremoval

Komentáře • 23

  • @swavacadoo
    @swavacadoo Před rokem +4

    Informative & ASMR. The Citristip definitely has the gloop factor! Pretty neat how two coats just peeled the bed liner right off.

  • @cyndisoo
    @cyndisoo Před 2 měsíci

    Good info here! Thanks bunches and loads!

  • @annihil8ted993
    @annihil8ted993 Před rokem +1

    Funny enough I'm potentially picking up a TJ and am also going to OKC this month. The TJ in question has a bed liner paint job which I think looks awful now with age so this is a great video and good to know!

    • @sweeneyoffroad
      @sweeneyoffroad  Před rokem

      Let me know if you’d like this door! I have no use for it

  • @artofcyclingcyclingsavedmy4386
    @artofcyclingcyclingsavedmy4386 Před 3 měsíci +1

    I love the Paint stripping chemicals being applied and no p. P. E being worn to protect yourself and tissue from being eaten by the strippers.

  • @caseyh3602
    @caseyh3602 Před 9 měsíci

    Just a heads up if you break the seal on the liner before using the citrus stripper it works great! Just grab a thin scraper and gently knock some of the texture off to allow the stripper to get into it and it works much better

  • @heyitsomar
    @heyitsomar Před 7 měsíci +1

    Seems like a coat of Citristrip to knock off the top layer followed by the Bauer tool will get you down to bare metal.

  • @sgib199
    @sgib199 Před 11 měsíci +1

    Thanks for the video. I've got some bed liner to remove from the inside of an aluminum boat. The CitrisStrip is impressive!
    "In the interest of fairness" it would have been better to NOT use the plastic wrap when using the TuffStrip, since that is not what the instructions say to do. Maybe it needs air to do it's job?

  • @paulthebuilder86
    @paulthebuilder86 Před rokem +1

    Right on thanks

  • @number1yota
    @number1yota Před 8 měsíci

    I made the mistake of raptor lining my truck. Red and black, the black still looks great but the flame red has turned pink. Its 3 and a half years old. Just want to go back with regular paint now.

    • @sweeneyoffroad
      @sweeneyoffroad  Před 8 měsíci +1

      That’s how I’m feeling about my bedliner on my Jeep. It still looks decent, but nothing beats a well done automotive paint job

  • @jfcustomfab
    @jfcustomfab Před rokem

    Ronsonal lighter fluid is the go to .. sticker adhesive remover .. works like a charm in any sticky mess

  • @theburger_king
    @theburger_king Před 6 měsíci

    i just bought a motorcycle and the tank is coated in it if i do this will it fuck up the paint underneath?

  • @realWorsin
    @realWorsin Před 2 měsíci

    Well this settles it. Never using bedliner lol

  • @spearmintaltoids9889
    @spearmintaltoids9889 Před 11 měsíci

    The problem I got is I want to remove bed liner off of my truck’s original paint because the previous owner covered up a beutiful navy blue paint job

    • @sweeneyoffroad
      @sweeneyoffroad  Před 11 měsíci

      Man, I’m not sure if that’s doable while salvaging the original paint…

    • @spearmintaltoids9889
      @spearmintaltoids9889 Před 11 měsíci

      @@sweeneyoffroad exactly. So far though the bed liner has actually been wearing off and you can see the original paint underneath like a really bad patina

    • @lowendfloridiancraka
      @lowendfloridiancraka Před 8 měsíci

      @spearmintaltoids9889 I'm pretty much in the same boat man. Bought a 72k mile 03 1500hd Silverado that the previous owner half-@$$ bedlined the entire thing. I'm roughly 50% done removing it all. Started with an orbital sander on the hood, front fenders & driver door. Then tried the Citristrip on the front passenger door, which I liked better cause 15-25mins was enough to remove the bedliner while keeping the paint underneath mostly intact. A 3000 psi pressure washer w/ a 30° nozzle did slow but good work on my tailgate. Automotive Goo Gone showed promising results. Just got the back doors, roof, and the rest of the bed and she'll be ready to be sent to the paint shop

  • @chagosoutdoors3122
    @chagosoutdoors3122 Před rokem +1

    well, i don't wear crocks. so, i guess I'll move on to another channel.

    • @Arlatube
      @Arlatube Před rokem +5

      Wth is that supposed to mean?