Watch before buying Yes Welder Flux135 Pro
Vložit
- čas přidán 10. 03. 2024
- Yeswelder is known for their affordability when it comes to Welding equipment and consumables. Many people bash brands if their not the top 3 Giants, but let’s be real; in this economy not everyone has the leisure of spending thousands of dollars for a welding machine. In this Flux135Pro review video, we pin point the upsides and downsides of this unit. For under 200 dollars, you can buy this unit in the following link:
a.co/d/2Kpo7T4 - Jak na to + styl
For just $200 it is hard to go wrong. You weld two things and you're ahead of the game.
Very true.
Great video
Thanks brother.
Exactly what I wanted to know. Of course, never having welded before I doubt I'll get the results you got, but at least I know it's in the realm of the possible.
If I can do it, so can you!
@@VantageWelding We'll find out. I just ordered one. Think I'll hold off on building roll cages for a while though.
I think it says the TIG torch and cord are extra.
Thanks very much for this informational video!
@@deankay4434 thank you guys for watching.
I had a similar issue with an Everlast 210 EXT and 3/32 -7018. The only rod it would run was the 3/32 Fleetweld by Lincoln. The Hobart 7018 I could not keep the arc going.
I think this was just the machine brother. It sputtered around with the Yeswelder brand 6011. But you might be right. I gave the machine away already so I can’t even test it out anymore. 😅
Cool video man. Was wondering about the flux core wire vs gas. Nice on a home set up to not have to deal with a big bulky bottle. Just a bit more cleanup than the gas i guess. That yesweld stick 205 you recomended me still laying it down. It doesnt seem to strugle with the 7018 like this one did.
Yeah brother. This small unit is perfect for gas less flux. Once cleaned, it’s just like any other weld. Being able to Tig with it is a bonus in case you got super thing stuff like what I welded for Thomas. Definitely worth the 160 bucks. That 205 is perfect for your’s and your son’s needs brother without having to break the bank
For one thing using gas will greatly reduce your exposure to the toxic heavy metal fumes produced by flux core wire, this is especially important if you'll be welding indoors where the fumes will hang around in the air
Gas is a pain. You have to have the gas.
Love your technique on tig, please do a tutorial on that.
I got plenty of videos homie. Check them out
I have the same welder and it lays 7018 just fine!
Nice.
I don't know nothing about welding, just got this machine today and will be practicing soon. Good honest review.
Let me know how it goes brother. Are you you doing it as a hobby?
@@VantageWelding : just to fix small stuff around the house and my trailer.
@Android_Warrior good stuff. 🫡
Would the welds have been stronger with more penetration with a steeper rod angle?
Probably. It’s good enough for the type of work a 145 dollar machine would probably be used for.
What would you recommend for a budget/starter stick/multiprocess welder?
Anything you can afford would be a good set up brother. Depends on what it is that you are trying to accomplish. Get a cheap machine to learn on and build from there. No need to spend a lot of all you are trying to do is stick metal together brother. 🫡
What happened to my yes welder it's new and stopped working on mat 22 in the middle of a weld
Contact them bro. I’m not a sell rep for them boys. 🤣🤣
What rig torch are you using?
It’s actually one of theirs. A @yeswelder Tig rig
Were you setup on a 110 outlet?
Yeah.
Q: is that pipe you welded aluminum, it sure look like it?
😢😭
Thanks for the video. I am thinking of getting a welder. I have only a very small shop which is mainly a wood shop. I suppose I am asking for a fire by taking up welding in it? Can you comment? I do not even have a metal table.
It’s definitely going to burn up. Probably won’t catch on fire, go buy a cheap fab table from harbor fright. They are pretty cool imo
@@VantageWelding thanks, man.
Could i get this to run on 110v 15a outlet?
Yes, but it’ll have its limits. Eventually it’ll trip the breaker.
Should take note you used mild steel wire on stainless so it's going to be weak and incredibly brittle. So I would ignore that hammer test.
I’ll keep this in mind.
Is that one of the two machines that you’ll be reviewing?
Yes brother. The other one was a best arc from the previous video. Was a bit more well equipped. They are sending me a plasma cutter now to review.
@@VantageWelding nice work!
@lamerariataaaaa thank you brother.
My wire untangles as it’s being fed what could it be
It’s not snug on the roller it self. If it’s loose it can cause that.
Does it work with 220v?
Probably not
You can look up all the details on their website.
weird it can do stick! And with good flux core wire, you will not have the problem it's so dirty. The wire makes the difference!
I think the weld it self was clean once removed the slag off. Came off easy too.
If you sprayed the steel before you MIG welded it with anti-spatter it would have prevented most of that ugly flux core spatter
Anti-spatter 🤮 people still use that?