Homemade Metal Band Saw

Sdílet
Vložit
  • čas přidán 17. 03. 2021
  • The Metal Band saw works very well, cutting is fast and precise, you can cut at any angle. I also planned to do a tape cooling system but ran out of time, but despite the lack of cooling the tape does not heat up and the cutting tape does not dull. To build the band saw I used a vice that I built in one of my earlier videos.
    Link to video of the vise: • DIY - A Milling VISE
    Link to buy a welding machine:
    www.expondo.pl/welbach-spawar...
    UK :www.expondo.co.uk/welbach-mig...

Komentáře • 2K

  • @4N5W3R5
    @4N5W3R5 Před 2 lety +21

    1:13 Hands of steal... My shop teacher always used to say "careful it's heavy..." and after we burnt our hands and dropped it he would say "told you it was heavy" Dude smokes of a layer of skin and doesn't skip a beat! One of the best scratch builds I have ever seen anywhere!

  • @thed0336
    @thed0336 Před 3 lety +115

    Compliments for your creations. I mostly admire the fact that you use the machines you created to cut, weld, drill holes and bend metal parts to create other machines you'll use. Keep it up ;)

  • @edwardsmith9049
    @edwardsmith9049 Před rokem +9

    Ladies and Gentle Men. Words can not express the level of skills that this man has showed. He has figured out how to build a shop. That tools that he needs he can build his self. And he knows what the metal is. And he knows that it not cheap metal.
    I stand up and give you a great big chap of ✋ ✋ hands.
    Great content keep up the great work. Real Talk 101 !!!!!

  • @glenpaul3606
    @glenpaul3606 Před rokem +8

    What a beautiful piece of work. That bandsaw is far better than any commercial unit one could buy. Magnificent build by a man with exceptional skills. Great video to watch.

    • @charlesstaton8104
      @charlesstaton8104 Před rokem +1

      I was thinking the same as I watched it come together. I guess this is what you do when nothing at the store meets your high standards. That bandsaw could end up in a museum after hundreds of years of continuous use, and future peoples would have an inflated sense of our craftsmanship in this era.

  • @johnsomerset1510
    @johnsomerset1510 Před 3 lety +28

    Great work! Nice to see you used a proper ball bearing race mounted on it's edge for the back of the band saw blade to run up against. Many cheap band saws just have the band saw blade continuously scuffing on the side of a ball bearing outer race to give back support.

  • @shawnrenaud3395
    @shawnrenaud3395 Před 2 lety +5

    Absolutely breath taking, what an incredible build!

  • @user-uv7bl2lc9u
    @user-uv7bl2lc9u Před rokem +7

    Здорово! Очень понравилось то, что для Вашей реализации этого проекта не потребовались сложные и дорогие инструменты, например токарный или фрезерный станок - все сделано инструментом, который есть практически у любого мужика в гараже. Результат просто огонь! Успехов в этом замечательном деле! Спасибо за ролик!

    • @dimmer4955
      @dimmer4955 Před rokem

      Всё есть кроме сверлильного станка

  • @emmetcosten9453
    @emmetcosten9453 Před 3 lety +7

    This build is awesome. I've seen a lot of wood band saw builds, but this is the first metal band saw. Great job!

  • @silvergrizzly316
    @silvergrizzly316 Před 3 lety +25

    I would love to take a trip to Poland 🇵🇱 and witness some of this craftsmanship Live in Action!!! 👍👍AMAZING SKILL!!!

    • @WorkshopFromScratch
      @WorkshopFromScratch  Před 3 lety +7

      Thank you :) Come to Poland :) I dream of a trip to the USA to see everything live but in these times of pandemic it becomes more and more unattainable :(

  • @general5104
    @general5104 Před rokem

    I watched this build a year ago and it just came back up in my pull-pile. It's bided on my mind all year. I believe I'll gather up the stuff and add it's distinctiveness to my hobby-shop. (It'll beat trying to cut stuff straight and square with a Spede-Cut disk.)
    THANK YOU

  • @wasdspace8159
    @wasdspace8159 Před 3 lety +5

    He imagines all the blueprints of each part inside his head.amazing

  • @garagecncplasma1590
    @garagecncplasma1590 Před 3 lety +9

    Bro introduced your own brand of band saw. You would sell these like crazy

  • @redlike5194
    @redlike5194 Před 3 lety +30

    И как мастеру, и как оператору - респект!

  • @nicholasricchiuto8923
    @nicholasricchiuto8923 Před 2 lety +4

    You have a lot to be proud of. That’s one of the most amazing videos I have ever seen on CZcams.
    Your fabrication and engineering skill is remarkable. Thanks for making the video

  • @zenonbinkowski7201
    @zenonbinkowski7201 Před 2 lety +10

    Kawał dobrej roboty, i wykonanie na najwyższym poziomie, Pozdrawiam z Polski.

  • @alocin110
    @alocin110 Před rokem +2

    This is a marvel of Mechanical Engineering. Your skills, plan, execution, and design all are of highly engineering knowledge. What a beautiful project and well done. I don't know how to put a better comment than that. I am wordless. Thank you for sharing and I did like your video. I am a doctor but like to watch mechanical project like this. It reminds me of my childhood when I used to watch lathe machining and mechanical work in our town at that time I was 9 years old and now I am 39 yrs. I love to see rusty steel cut into pieces and then turns into shining metal. The cutting is so cool like cutting a birthday cake. I love it.

  • @goransablic7339
    @goransablic7339 Před 3 lety +35

    Really amazing and incredible high quality made metal band saw. For guy which has made it only highest respect.

  • @mj6user488
    @mj6user488 Před 3 lety +11

    the best metal band saw in the video I've ever seen.

  • @user-ob5rw5jv2y
    @user-ob5rw5jv2y Před 2 lety +1

    Это шедевр!! Я "залип", смотрел как завороженный!! Мастер!! Все шикарно сделал!!! Респект тебе и уважение!!!

  • @francescofabbri9352
    @francescofabbri9352 Před rokem +1

    Complimenti perché questo non è un restauro ma costruito dal niente con una precisione assoluta. Un operaio con attributi. Molto Bravo!!!!!!!

  • @user-hb5lu7cj3c
    @user-hb5lu7cj3c Před 3 lety +4

    Cool made, much better than from the store . You can immediately see a real professional . Respect

  • @Felix9lives
    @Felix9lives Před 3 lety +5

    This channel should be called Heavy Industry Workshop From Scratch! Your amazing!:))

  • @pjhalchemy
    @pjhalchemy Před 2 lety +47

    Outstanding build and design! One of the best I've seen in fabrications from scratch. Thank you for sharing your talent, skills and passion!

    • @bigappleplug6021
      @bigappleplug6021 Před 2 lety +5

      Welding is the hardest.
      The rest he made easy and self explanatory.
      The rate at which he ran through thr project is what is fascinating 👏

  • @user-mi1jq7fj5r
    @user-mi1jq7fj5r Před 2 lety

    How I love the masters who briefly and clearly lay out on the topic in 5 minutes

  • @DavidHerscher
    @DavidHerscher Před 3 lety +21

    Holy Fraggle Rock, that's about as cool as it gets right there.

  • @Joserocha-wm9de
    @Joserocha-wm9de Před 3 lety +23

    Thats some high craftsmanship skills right there , i can watch this dude all day ... Great job , hugs from USA

  • @raughboy188
    @raughboy188 Před 2 lety

    One thing i love about building power tools like one you built is that you can maintain it and fix it easily and there is not unnecesary electronics inside just good old electromotor and safety on/off switch. Keep up good work.

  • @terranempire725
    @terranempire725 Před 2 lety

    Very impressive. Thank you for making and sharing the video. Looks rock solid.

  • @antoniodimalanta2149
    @antoniodimalanta2149 Před 3 lety +6

    Man, that's one of the most awesome machines I've ever seen made. Just amazing work!

  • @steelrunner83ify
    @steelrunner83ify Před 3 lety +41

    That bandsaw looks better built than most industrial saws I have seen. Well done sir.

  • @AntonySimkin
    @AntonySimkin Před 3 lety +2

    Man you clearly know how to make good, functional, professional looking stuff!

  • @dwaynehope1689
    @dwaynehope1689 Před 3 lety +3

    wow. you are some kind of mechanical genius to build the things you do. amazing. well done.

  • @laborges4535
    @laborges4535 Před 3 lety +7

    Muito bom, muito bem feita essa serra, ótimo profissional.
    Multiuso, corta em vários ângulos.

  • @user-md1su1su9r
    @user-md1su1su9r Před 3 lety +13

    ONE LIKE WILL NOT BE ENOUGH FOR SUCH A BEAUTYFUL WORK
    GOOD JOB MAN!!!!

  • @t-t8753
    @t-t8753 Před 2 lety +1

    Woah! That is an insane work! It is like the high quality, and like a branded band saw that are bought.

  • @garyclagett1848
    @garyclagett1848 Před rokem

    Absolutely superb attention to detail, amazing video, the compressed timeline makes this easy to watch.

  • @Jimmy_in_Mexico
    @Jimmy_in_Mexico Před 3 lety +46

    Very nicely done. I am going to save to a playlist so I can reference it for a future build.

    • @WorkshopFromScratch
      @WorkshopFromScratch  Před 3 lety +6

      Thank you 😁

    • @orientalengineers5860
      @orientalengineers5860 Před 3 lety +1

      If we are not skilled. It becomes jugad. Which doesn't work property.

    • @verena5347
      @verena5347 Před 2 lety

      *lathe machine homemade*
      czcams.com/channels/xbj8p4YwHR-r9RWriwX3jw.html

    • @user-hc2bm9bj7q
      @user-hc2bm9bj7q Před 2 lety

      @@WorkshopFromScratch а скажите какой мощности мотор. и почему вы не стаи делать охлаждение жидкостью. это вроде как увеличивает срок службы пилы

  • @volvagia6860
    @volvagia6860 Před 3 lety +9

    Wow! That went way beyond my expectations! Amazing work!

  • @QWireArt
    @QWireArt Před 2 lety +3

    I dream of having a desk like you.

  • @steamsearcher
    @steamsearcher Před 3 lety

    LOVELY COLOUR.
    Total enjoyment after a day in our Model Engineering Workshop.
    David and Lily Reading England.

  • @louisfaasen4511
    @louisfaasen4511 Před 3 lety +8

    Your skills and knowledge base are truely remarkable. This is a high quality build, but so is all your other builds. Much that I can learn from you.

  • @rodblomley8517
    @rodblomley8517 Před 3 lety +3

    Fantastic work, best bandsaw ive seen

  • @usethenoodle
    @usethenoodle Před 2 lety

    Amazing job and really nice video as well! Thanks for letting us watch.

  • @ronmurphy9819
    @ronmurphy9819 Před rokem

    I really like it! I told my wife if I had the bearings I could do that. You know what she did, she went and found them online. I now have my next project. I’m a lucky dude. Thanks Ron

  • @knightrider6478
    @knightrider6478 Před 3 lety +20

    Man you are a genius. Your work is ART !

  • @falkaabi66
    @falkaabi66 Před 3 lety +3

    You are creative in the full sense of the word, I am happy to join you

  • @tomsommer54
    @tomsommer54 Před 3 lety +1

    That is BAD TO THE BONE! Great job! Thank you for sharing your work.

  • @spideybrent
    @spideybrent Před 3 lety +2

    Hello from Yorkton, Saskatchewan, Canada. Thanks for sharing your great video’s please keep them coming.

  • @veaceslavanapislaru7310
    @veaceslavanapislaru7310 Před 3 lety +4

    It is impressive how straight you can cut with the angle grinder

  • @brianpatrick8441
    @brianpatrick8441 Před 3 lety +3

    I like the fact that it has a 3/4" blade

  • @davitietjen1587
    @davitietjen1587 Před 2 lety

    Você é daqueles HOMENS que merece MEDALHA DE HONRA. Parabéns pelo Trabalho. Sta Catarina - Brasil.

  • @johndoeuf2868
    @johndoeuf2868 Před 3 lety +1

    Perfect job. You have gold in your hands. Congratulations

  • @jackrichards1863
    @jackrichards1863 Před 3 lety +5

    You handled that build very well. I know there had to be research and tons of other preparation , but still.. Nice job.

    • @Slangevar333
      @Slangevar333 Před 3 lety +1

      I agree. Either he has stacks of CAD files of mechanical drawings for each segment or he used an existing machine's measurements to produce his heavy-duty rendition. I doubt he was "guesstimating" that much!....but maybe.

  • @ZOV_23
    @ZOV_23 Před 3 lety +19

    Великолепный станок вышел из под рук профессионала. Ждём последующее видео. Нужно обязательно добавить систему СОЖ. Жаль что заранее ванну на нижней станине станка не предусмотрели. Хотя с такими руками это не вопрос. Удачи вам, и вашему каналу.

    • @Moshg73
      @Moshg73 Před 4 měsíci

      צודק 🚿🚿🚿☝🏼☝🏼☝🏼

  • @rafafatyga5274
    @rafafatyga5274 Před rokem +2

    Mistrzostwo! Lepsza niż moja fabryczna taśmówka cormak!

  • @iHayri1
    @iHayri1 Před 3 lety

    If you ever need a Company name, "Eternity" it is, this is build to last a eternity, absolut great workmanship and attention to detail. Thank you for sharing.

  • @TallMansRVReviews
    @TallMansRVReviews Před 3 lety +7

    Brilliant. I wouldn't even know where to start.

  • @R1mdennis
    @R1mdennis Před rokem +5

    This guy could mass produce these That's how good he is. I'm impressed

  • @mannyfresh8504
    @mannyfresh8504 Před 2 lety

    one of the most impressive videos I ever chose to sit and watch. the talent shown is remarkable.

  • @kevinkirk4285
    @kevinkirk4285 Před rokem

    I recently discovered your channel (and subscribed) and have been watching your many videos in utter fascination.
    I am an advanced level fabricator as well and I am absolutely amazed and inspired by your skills.
    Well done, Sir! Well done indeed!

  • @jonathangofast559
    @jonathangofast559 Před 3 lety +21

    This man got some skills 😎👍

    • @09alvaha
      @09alvaha Před 3 lety +1

      Maybe but what he really has is time

    • @joseanesoares5104
      @joseanesoares5104 Před 3 lety

      jiniūb

    • @DudelPaul
      @DudelPaul Před 3 lety

      Lol, with all the stuff money he owns, you can build tons of crap. So what

  • @antesh9808
    @antesh9808 Před 3 lety +17

    Your content is amazing 👏

  • @eismaildds1
    @eismaildds1 Před 2 lety

    Your passion is clear in all your work.

  • @argeniargeni6699
    @argeniargeni6699 Před 3 lety

    Amazing work. Thank you for the video. 🙌

  • @170166
    @170166 Před 3 lety +3

    That was amazing to watch. I was trying to imagine what the drawings would look like for those blade guides you made, too much for my simple head though. Big thumbs up.

  • @user-fg2qp4sz3v
    @user-fg2qp4sz3v Před 3 lety +15

    Шикардос!!!

    • @savade48
      @savade48 Před 2 lety +1

      ага, это уровень!

  • @allistairneil8968
    @allistairneil8968 Před rokem

    Djenkuje bardzo... that was the best video ever with god like confirmation at the the end with 2x45 degrees spot on. Awesome! Spokko!

  • @F74D3N8r0T
    @F74D3N8r0T Před 3 lety

    I came from the wheelbarrow you built and I saw the belt saw which I definitely would need to. But this one is almost as complicated to get the parts for as the wheelbarrow itself. Also very well done!

  • @iiinsaiii
    @iiinsaiii Před 3 lety +9

    Damn! Talk about heavy heavy duty band saw.

  • @fugalibrana
    @fugalibrana Před 3 lety +5

    Wooooooaa!! That's amazing!!
    Just put your signature on the cover!
    A work of art.

  • @jamalludin8836
    @jamalludin8836 Před 3 lety

    This guy is a tools master ... 👍 and i am jeleous not only with the high quality product he made but also the complite tools he use... Amazing....

  • @codejarr
    @codejarr Před 3 lety +1

    En serio, que talento amigo.. Felicitaciones.

  • @uomocamisaria4142
    @uomocamisaria4142 Před 3 lety +4

    Gênio, muito bom!

  • @elioolivastio5973
    @elioolivastio5973 Před 3 lety +3

    Muito bom uma perfeição para que a gente entenda

  • @yogeshjain1682
    @yogeshjain1682 Před 2 lety

    fantastic is understatement, really appreciate your talent, skill and the PASSION!!!

  • @GrenPara
    @GrenPara Před 3 lety +2

    Nice project and looks great.

  • @fs81
    @fs81 Před 3 lety +5

    Simplismente sensacional!!!

  • @I_killed_that_beard_guy
    @I_killed_that_beard_guy Před 3 lety +24

    Seriously you need more subscribers...
    At least more than 500k

  • @user-nh8ez5nn9m
    @user-nh8ez5nn9m Před 2 lety +1

    Отличная пила!!! ,отличная мастерская!!!, золотые руки!!!

  • @MarcioTorres
    @MarcioTorres Před 2 lety

    Parabéns, ficou excelente!

  • @MCsCreations
    @MCsCreations Před 3 lety +7

    Fantastic work, dude! Really well done!!! 😃
    Stay safe there with your family! 🖖😊

  • @electronic7979
    @electronic7979 Před 3 lety +4

    Excellent project

  • @raimundamariacruz7147
    @raimundamariacruz7147 Před 2 lety

    Eita mano velho vc só bate nos pulmões? Um brilhantes trabalho de tirar o fôlego!!! Parabéns!

  • @elmervidad91
    @elmervidad91 Před 2 lety

    Just wish I had all ur tools used to make this! incredible build as always 👍

  • @davidmutethia5292
    @davidmutethia5292 Před 3 lety +4

    been waiting for this... Thank you

  • @user-nq9xr3xq3v
    @user-nq9xr3xq3v Před 3 lety +4

    А многие думают что кустарное это хуже и дешевле.... Кустори рулят!!!!!! Спасибо и удачи 👍👍👍👍👍👏👏👏👏

    • @andredergavin9070
      @andredergavin9070 Před 3 lety +1

      Даже бывает делают лучше намного, чем продают в магазине.

    • @user-nq9xr3xq3v
      @user-nq9xr3xq3v Před 3 lety +1

      @@andredergavin9070 я свои стоянки и преспособления не поменяю не на какой фирменный....!!!!

    • @andredergavin9070
      @andredergavin9070 Před 3 lety +1

      @@user-nq9xr3xq3v Сделанное своими руками бывает намного надёжней и долговечней.

    • @tumbystyle4844
      @tumbystyle4844 Před 3 lety

      Very good

    • @andredergavin9070
      @andredergavin9070 Před 3 lety

      @@user-nq9xr3xq3v Сделанное своими руками грамотно всегда лучше.

  • @amyasseektruth8246
    @amyasseektruth8246 Před 3 lety +1

    ABSOLUTELY AMAZING!!!! Genius!!!! Insane skills!!!!

  • @molotovelee90
    @molotovelee90 Před rokem

    If one day the youtuber of this video could build a lathe machine from scrach by just using off shelf product bearing,shaft,jaw plate, it would be an amazing achievement.

  • @alexvmw
    @alexvmw Před 3 lety +4

    Очень крутая ручная работа! Золотые руки! Подача СОЖ ещё нужна. И корыто для этого.

  • @raimundooliveira9953
    @raimundooliveira9953 Před 3 lety +3

    Tem uns caras nesse mundo que são inteligentes. E caprichosos. Você é im deles . parabéns um òtimo trabalho 👍👍🙏🙏

  • @amaryalvesamorim5342
    @amaryalvesamorim5342 Před 2 lety

    Ficou excelente. Parabéns.

  • @yt4krist0f
    @yt4krist0f Před 3 lety

    Wow... Amazing job, well done, keep on going!

  • @cosscat
    @cosscat Před 3 lety +4

    There is nothing nowhere near as robust as this on the market. Impressive!

  • @weldeadlobes86
    @weldeadlobes86 Před 3 lety +4

    That is seriously a kick ass build.

  • @inkwizytor9931
    @inkwizytor9931 Před rokem

    jeszcze z jakieś 5 lat temu by się wzioł za robotę takiej przecinarki, ale teraz to materiały droższe niż nie jedna tańsza chińska przecinarka, którą usztywnić można by tak samo cieła.

  • @ianviljoen9036
    @ianviljoen9036 Před 3 lety +1

    Fantastic work! Like the orange colour

  • @user-rr6vt8hi2r
    @user-rr6vt8hi2r Před 3 lety +7

    Класс,видно что человек любит свою работу.👍

  • @simonbilstrup536
    @simonbilstrup536 Před 3 lety +12

    In another video, you could make a coolant system for the blade 😊

    • @blackdaan
      @blackdaan Před 3 lety

      True.. even old electric hacksaw machines have coolant.. if it has coolant its the same machine as we have at my work.. love the hydraulics on bandsaws nice work that you added that

  • @garyclagett1848
    @garyclagett1848 Před rokem

    Love that hydraulic vise !

  • @piotrk8369
    @piotrk8369 Před rokem

    Wow, dude! It's briliant.