Traxxas 4-Tec 2 0 VXL Speed Upgrade - 41T Pinion Mod
Vložit
- čas přidán 5. 09. 2024
- Buy The Best ESC & Motor Extension Leads Right here - www.ebay.com/i...
Get Your Very Own Traxxas 4-Tec 2.0 VXL Right here -
The RC Gear We Use: -
GPS Speed Meter (Used in our speed tests) - www.banggood.c...
High Quality Batteries we recommend for power and speed: -
Get Awesome Gensace Batteries here - genstattu.osit...
Get Powerhobby Batteries Right here - www.powerhobby...
Cheap Batteries For Bashing: -
2S - www.banggood.c...
3S - www.banggood.c...
4S - www.banggood.c...
6S - www.banggood.c...
1-8S Battery Charger (400W) - www.banggood.c...
Lipo Checker (Full color) - www.banggood.c...
The Servo's We Use: -
25KG Metal Geared Waterproof Servo - www.banggood.c...
1/5 Size Servo - www.banggood.c...
Best RC cars Under $100
1. WLToys 144001 (40mph!) - www.banggood.c...
2. WLToys 124019 (43mph+) - www.banggood.c...
3. Q902 - www.banggood.c...
Best RC Crawlers Under $200: -
1.) HobbyPlus CR24 G-Armor - bit.ly/3rws4Nt
2.) RGT136161 - www.banggood.c...
3.) Redcat Everest 10 - bit.ly/36ng2xr
Need a Traxxas 4-Tec 2 0 VXL Speed Upgrade? (link to parts below) Want MORE than 70mph? Then check out this easy to do 41T Pinion Mod.SUBSCRIBE & HIT THE BELL - www.youtube.com... Get the 6ch Radio Transmitter & Receiver We Now Use Here - www.banggood.c... It's got a built in Gyro, ABS Braking, and a 500M Range For Under $30!
Not GPS tested so far due to traffic and need for a longer test track! It's very, very fast though! No noticeable heat issues and it pulls very hard off the line. This 4tec 2.0 mod takes about 5-10 mins to fit.
GPS speed test to follow. All shares and comments welcome.
The parts used in the video are: -
Pinion amzn.to/2iVmkgQ
Shaft Reducer (Needed to fit the above gear) amzn.to/2iXEEGn
If you love it and want RC gear like this Call F&M Hobbies on (973) 361-0042 or email them on fandmhobbies@hotmail.com
Want to send something to Driftomaniacs to review and see it on the channel? Contact us via the link on the 'about us' page
• Traxxas 4-Tec 2 0 VXL ...
Music: www.bensound.com
#traxxas4tec #4tec #traxxas4tecvxl #traxxasvxl
#rccars
Get Your Very Own Traxxas 4-Tec 2.0 VXL Right here - bit.ly/34mCcxh
I did it exactly how you show it on the video and shit you can tell the difference on speed. I have to use different holes on the motor plate because using B and C it was too tight. But it runs good and you can notice the speed.
Good Tips! I've never seen a 5mm shaft reducer before, interesting stuff!
it overheats ridiculously. shuts off everytime
You Tried It If 41T Was Too Much Im Gonna Try 38T 55T Spur
How fast did that go on 3s lipo with those gears
I want that 55t spur
Phil working on a few options this week. Will PM you via FB when I have some results. I've order a couple of things from Amazon to try. Nice 100+ mph pass you did BTW! I've a new 962 body on order. Think the Ason Martin one is slowing the car up with the rear bodywork drag. Open rear end is best, right?
Driftomaniacs I'm interested in a 55t spur for my 4tec 2.0
Driftomaniacs thanks and yes open rear up.
@@philipjolley1015 did you ever end up finding that spur gear?
@@kwardino yes
I'm running a 48t spur and a 35t pinion. I'm having problems lining them up. Any suggestions
I have to say think about buying an aftermarket motor mount, you're not going to get that to line up with the stock setup easily as it's 55/35 it's setup for. Facebook group is VERY good for advice
I had to use holes J/A c/b the mesh was way too tight, motor would even turn when I was hard testing
I've fitted the HR motor mount, fully adjustable e.g. no set holes!
This make perfect for vta. Would 36 pinion gear fit in without modification?
you'd need to try any gearing combos out. Has to be done on a 'fit and feel' basis. There's no traxxas support for anything higher than 35/55T
I need help with mine
VXL version or non-VXL version? Do you have the Bluetooth module for the transmitter? Only ask as if you do you can use the Traxxas app and really set the car up well. Calling it a night but will pick up again tomorrow
How and where do I get the 55t spur gear
MrDwight107 only currently comes with the vxl model. The world and it's mother is waiting for its release
Yeah I can't find a 55 any where ?
Hey I’m fixing to build a 4tec 2.0 I wanna run 29 /29 mod 1 what all kinds of work will I have to do
I've done a video on fitting a mod 1 setup, however be advised that it was very tempramental and with 1/1 that motor /esc wont' last very long at all. Also you'll end up removing the central bearing which means shaft issues may come in to play. I've opted for the mamba x setup, which runs okay on 4s and 6s. You could try 4-tecc 2.0 group on facebook for more details.
How did it run stock with the 41 pinion?
Not a clue ! This vxl has always ran 35/55!
like