Chevy Silverado Tahoe Suburban Truck Van Cranks No Start Passlock Anti-Theft VATS Module TESTING
Vložit
- čas přidán 9. 02. 2017
- SUBSCRIBE FOR MORE VIDEOS!
REBUILT, LIFETIME WARRANTY!
www.pro-rebuild.com
Here at Pro-Rebuild, we have cracked the code on these now OBSOLETE GM Passlock anti-theft modules, equipped on 98-02 C/K Chevy Trucks, GMC Yukon, Chevy Tahoe, Suburban, 99-01 GMC Denali and Cadillac Escalade, and 98-02 Express and Savanna full size vans. In this video, we run down common symptoms on these problematic modules. Bad passlock modules result in a crank no-start situation. There is NO bypass available for a bad module, you have to replace it with a good one. We built this one of a kind testing tool with proprietary software to fully test these passlock modules. We rebuild these with the highest quality components. Each module comes with a LIFETIME warranty. Express shipping available. We have many of all four available part number. 16269455, 16269465, 16269475, 16269485.
Call us Monday through Friday, 9-5 Central Time (314) 502-3104
You can also find us on Ebay under the Pro-Rebuild username.
www.ebay.com/usr/pro-rebuild
Passlocks
pro-rebuild.com/index.php/pas...
www.ebay.com/sch/m.html?_odkw...
Thank you, bought one from you on ebay for 1998 silverado and it solved the problem. This problem went on for over a year and just continued to get worse until the security light would not go off and the truck would no longer start for more than a second.
I’ll be placing my order tomorrow, I think I need the 55 but I gotta double check. Thanks again for this video.
Thanks Guys! I just ordered one from you for my 1999 Chevy 3500 Box Van. It should be here on Friday 4/26. I'll let you know how it goes. Thank you.
How did it go?
Thank you for your product I got my Van back on the road works perfectly👍
I installed one during the dash swap on my OBS Suburban (easier than it sounds,) I did the correct key relearn technique and everything is fine now. I had previously purchased one of those Newrockies bypass modules but never even installed it due to appalling lack of support up front. Now I know better and my factory antitheft system works like it's supposed to.
Where did you get it need one
@@timothyjohnsonjr8975 i got it from the company that posted the video
*WARNING: FIRST LOOK at your KEY! Does it look WORN-OUT with rounded edges? I actually got two IDIOT lights on the dash come on. ENGINE and SECURITY and I read the code as SECURITY KEY ERROR. Simple, my key was worn out and did not push the lock tumblers high enough any longer. I had the Locksmith make me a key that had taller dimensions by shimming the key copying machine. This new key pushed the pins up higher like the old stock key used to and it worked fine after that. $25.00 and FIXED!*
Awesome instructions. Thank you. I presume that I need to take mine out first so I know which one to order. Correct?
can you make a video on how to take that part off and where is located in Chevy Silverado 1999??
I have a 2002 yukon xl that the security light stays on while the truck is off and kills the battery. I think it may be affecting the daytime running and interior lights as well. any help is appreciated.
Do you have to have door closed while relearn in progress.
Do i have to Uninstall the bad one to give the part ## or i just can i order it by truck model and year
If i will replace a 2nd hand anti theft control module,thesame part number,i'm asking if they need to reprogram?thank you.
Since these are part number specific, do you have a video showing where they are actually located under the dash and how to remove them to verify their actual part number? I'd like to order one for my 1999 Chevy Express 1500 van. Thank you!
I have not made a video showing how to locate and replace this module. It is located above the gas pedal and requires no tools on this particular vehicle. If you have not yet done so, give us a call and we'll be happy to walk you through that process. 573-340-3776
OMG this has to be the issue
im getting one of these bad boys when i get the chance
Thank you
I can't locate mine on a 99 Silverado 4x4 there's nothing but plastic for the HVAC all in the way. can you tell me where it should be under the dash?
Have you ever had one of these make the truck stall going down the road?
this is Dino I need some help or some information on a 2000 GMC Sierra they stole my truck broke my collar and I replaced it with another used collar column can you tell me how to get my truck to start we use column the truck will not crank up when I turn the key to start it. Thanks hope u can help
How about try this link.
www.ifixit.com/Answers/View/78850/My+ignition+on+my+1999+Tahoe+was+vandalized,+and+the+Anti-theft+is
I hope it helps
Do you know where that module is located? I have a 1999 GMC Sierra SL .
Will the car run without a security module?
My security light stay on all time I drive my 1998 K1500. The truck running without any problem, the only issue is that the light is always on... Its could be something bad??
What about a 2003 Chevy Express 1500 with the 5.3 I'm having the same problem that you were sewing in the earlier years it was start is stall out or won't even start at like it tries like is not getting the fuel so the engine I already replace the fuel filter and the fuel pump
that generation uses the newer style of Vats which is in the BCM. We unfortunately don't carry anything for that generation. Try Spartan Autoworx.
Thanx I got it started it took perfect but I think I got another problem the security light is out now
I put a new module in my 98 Tahoe 4x4 still does not want to start stats for 2 seconds shut off 2 seconds shut off I noticed my security light on my Dash does not flash but stays constantly on what is the issue please help
You got one that would go on a 2001 Chevy S10 with a 4.3 motor??
What if the truck doesn’t crank and doesn’t start and the security lock light is solid?
I have 2001 chevy 2500. Were i can find the box
Can u send me a link to order security module please
How do I get one from you. I have taken mine out already. Do I send it to you?
Hi, i have a 2001 Tahoe and sometimes when i try to Start it, it cranks, runs for about about a Second and than shuts off. Right after i push the "unlock" button on the remote control the car starts immediately and runs fine. Is this also an issue with the passlock or is this a different System?
The 2001's use a different system, they are still available form the dealership. Thanks
I would like to purchase one please! I'm not on youtube often but I do needed one!
03 avalanche have one of these? I have a no communication with the antitheft and think I found it but not sure and don't want to mess something else up.
That is a different module, we do not work on them.
They use a different one.
Do you guys sell the vatts module??
My 1999 escalade 5.7 vortec it don't have a chip on the key but it starts a couple sec and stops everything has been changed related to fuel and Plugs firing does my car have same security module even if the key don't have the chip. I have had this truck sense 2005 and it's had this problem off and on sense 2008 it will be fine for weeks at a time thin no start battery is perfect but I'll put a very powerful jump start on it for extra power and after five or tin minuets it'll start.i need help I'm so over it.
Your vehicle has a security module. All 99-00 escalades do. These don't have chipped keys, but instead rely on a sensor in the ignition switch to determine if the vehicle should start with X key inserted. What does the security light do when you put the key in the ON position?
Hi, today my 98 suburban start and run 1 second or less, after a complete dianostic i found that the fuse 21 had not voltage, i send courrent from the next fuse and now run and works perfect, fuse 21 is security, this is a sign of damage to this unit?
Sounds about right.
still working fine
How did u send current to it? Mines doing the same @ alverez
roberto alvarez how u send current
How do I get with you guys to order one of those?
How do I know wich one I need
Do you have one for a 96 GMC Yukon SLT 4 door v8 gas?
Please contact us through ebay , follow the link www.ebay.com/usr/pro-rebuild
So, if your vehicle starts and then suddenly stalls seconds later, check your security light to see if it blinks (mine did 3 times) then stays on. If this happens, start your vehicle, when it stalls just leave your key forward, this could take ten minutes or so, but wait until your security light turns off. Then turn your key to the off position for 10 seconds, then start it. This will reset your VATS ( vehicle anti theft system ) to recognize your key again. Thiis was on my 99 suburban. Getting a new one made from the dealer would be a good idea once this happens. Hope this helps!
11 min key on, 30 seconds off, repeat 3 times then start it is the correct procedure for a 99.
@@MrTaxiRob my point was when your security light goes off, turn your key to the off position. I only had to do mine once and it worked
@@unitedfirearms1057 my experience was a solid security light, which led to my self diagnosis of the module being bad. I'm not entirely sure but it sounds like your problem is with the key cylinder. If your key is wearing down, do the full relearn procedure and it shouldn't happen again for a long time to come.
I mean, if your key's resistance has changed that much since 1999, logic dictates that it would take that long to flare up again, no? But more than likely the cylinder is going bad. Either way, do it all yourself, bypass the dealer's crazy labor charges. I'm no magician and I've managed to do most of the work myself on this truck, except for the things that require a lift.
@@MrTaxiRob I try and do it all by myself. I failed to mention I had the suburban down because I dropped the tank to replace the fuel pump. I went to advanced or something and it was 260$ so I went online to 1Aauto and got it for 70$. (Partsgeek and rockauto are good sites too) so while having it down and my battery unplugged, I replaced the wiring harness and the fuel pump. Plugging the battery back in and trying to start it I immediately had trouble. It would start, run a few second than stall. I noticed the security light would blink 3 times than stay on. I was using a key that was from Walmart so I started using the actual GM key that came with it. Did the reset and it stopped. I did see about the module going out and you can buy them online from a place and program them or bypass the muddle with a resistor and a wire or something of that nature.
@@MrTaxiRob Maybe having it down was all a coincidence as to why it acted up once I got the fuel pump on and battery hooked up. I never had trouble before that. It's probably over a year with no trouble since. The videos I looked up, I went back on them and left this comment to help others. I didn't pay attention to the security light at all. Didn't know why it would just stall right away after starting. Thought it had something to do eith the fuel pump. I bought a fuel pump pressure tester and everything so that I could check pressure. It was all good. Stumbled upon this fix and noticed the security light. I've only used the GM key since because I wasn't sure about the walmart made once.
Was wondering were is the anti theft pass lock module located 2003 chevy tahoe please help
The NBS, or 1999+ body style uses a different style of anti-theft module. I believe they're located in the dash, and its a grey box about 2"x3".
When replacing this, do you just replace the part or do you have to reprogram anything?
This will need to be programmed
Ive change mine 3 times n reset the key it. Flashes and then it stays on truck wont start
Where do I order one from u guys
Hi, i have a 1996 roadmaster, do you have modules for this.
Please contact us through ebay , follow the link www.ebay.com/usr/pro-rebuild
Where can I buy vats box
Not sure why I click on video, hear you, but get a page of info with no video. No, I find the same video down the page. Have seen this before and don't know why. Is this a youtube thing?Interesting that you are rebuilding them as these are one shot re-learn for proper frequency generated from padlock module. As long as the padlock module is working and wires under dash are not broken. ASE Master Tech since 1978 / Retired. Thanks.
Thats bizarre. It is working on our end. Maybe someone else will chime in as far as thats concerned.
We see about a 50% failure rate on the used modules that come in prior to rebuilding. Several different issues, and not all can be addressed. I'd say 90% of them can be reliably repaired, and 10% are too far gone. We have sold a few thousand of these over the last couple of years with very minimal issues, and most of which can be linked to damaged wiring, or the sensor in the ignition.
Hi i have one Cadillac Eldorado 1992 4.9 i put a resistor key but not fire gust crank dhe fuel com and fire from spark plugs but dhe injector doesn't open can anybody help my
Hi, i have a 2006 Chevy Avalache, do you have modules for this.
We do not, that style is integrated into the BCM.
I have a 98 chevy express 2500 i need the module do you carry it ?
Yes we do! Feel free to call us at 573-340-3776
Can you explain to me how to remove the TDM wire connector? How to unplug it from the module. I can't find anything online to help me, do you have any video links or website links or advice on how to (un)plug the connector? I seen you do it by wiggling it out...i have one that looks just like these in my car and I need to remove the connector from the black module box
There is a pivot pin on the bottom of the connector if you are looking at it. If you have a truck, you can use a large flat blade screw driver to pry it back. On a van, you can squeeze the back side of the connector to release this.
@@ProRebuild thank you so much, I actually was able to wiggle it out, once I lifted those place things on the side (the lock or whatever to keep it in place) I had to install an Newrockies Passlock Bypass Pro Module, got my car running again after the security light came on flashing and my car wouldn't start. Sure appreciate the response but I just ended up doing what you did with the wiggling. 💯👍✨
@@glorious28 I bought a NewRockies module, and their "instructions" didn't tell me that I had to remove most of my dashboard to reach the module (OBS Suburban.) What was you experience with their customer service? They completely ignored me when I asked about this.
@@MrTaxiRob so I fully researched it before I bought it to see where it would be at. They have list online that you can check and see for each car type. I left a review actually. I can share it here. I'll come back and reply again. But it was a success. Very confusing at first but I successfully installed and threw the damn TDM away! Haha it's ran for like over a year now since... And still running
@@MrTaxiRob mine was under the glove box and I'm sorry yours was under the dash!! Steering wheel.
I've been looking for a solid solution to my problem, and it sounds like it's my PCM. Whenever my truck refuses to start, the SECURITY light stays on, it doesn't just flash. I've done the battery disconnect and relearn procedures (everyone seems to have a minor variation in their technique) and they don't work consistently either. The last CZcams video I saw that clinched it for me was of a backyard mechanic opening up his PCM to reveal a fried capacitor on the board. I'm assuming that's a common thing, and the part of the board that the cap attaches too can't accept a new one. When you say " the best components" I'm also assuming you jump the board or repair it somehow, either way for $149 it's a helluva deal. Beats $500 at the dealer for a key and ignition that I probably don't even need.
I need to know we're the module located on a 2003 chevy Tahoe
Please contact us through ebay , follow the link www.ebay.com/usr/pro-rebuild
Hi i have a 2005 Chevy express 4.8 it starts and shuts off do you sell that module is that passlock part of the BCM body control module thank you!
We do not
Thank You!
What happens if and when you run out of stock with these in the future? Will you still be able to honor your "lifetime warranty" on them? Where will you be able to acquire an ongoing inventory of them, in the future? Thanks.
We have about 600 of these in stock needing service, and about 100 on the shelf waiting go. We repair about 100 of these a month and get about that many in. From our data here, we are not going to runout in the forseeable future.
@@ProRebuild Maybe you should ask folks here, like me, who buy one, to return the original to you as a "core" replacement requirement. I'd be happy to send my old one to you; I just ordered a new one from you, (for my 99 Chevy Express 1500 van) - and it works! Thank you!
@@steveandrews8301 At this point we have 4-500 of these waiting to be fixed, so there isn't much of a need for a core. Happy it worked out! Thank you for the business!
@@ProRebuild I just went ahead and had my mechanics shop, a large one, go ahead and install your passlock module, for me. I had it sent directly to his shop's address. He expressed a desire to use your company to order more of these for his future customers, as he has others who've come in to have their vehicles worked on that had the same problem. Jim Douglas Automotive, High Springs, Fl. is his name / company. He will likely be sending you some new business, soon! He likes your work and products and warranty. :) Thanks again for helping me fix my van!
I have a 2003 chevy Tahoe it crank but no start the security light stays on I tried the bypass with the 2 wires an the reset but after 10 min light stays on
Please contact us through ebay , follow the link www.ebay.com/usr/pro-rebuild
Still available?
Do you guys carry these modules or 2001 2500 Suburban trucks
Yes please match part numbers. We have a link to our eBay sales page in description.
Do you sell a anti theft module for a 2000 gmc 3500 Sierra 6.5 diesiel ??
yessir! make sure to match your part number as there are two different options.
98 gmc k1500 cranks fires for a secon then dies, security light stays on, no relearn is helping, fuse 21 helped the first time and doesnt help anymore, module what I need? or is it something in the ignition? cant get the security light off or the dang thing to start at all
Sounds like a module issue.
just worries me to spend that much and do that work and then it ends up being ignition cylinder or passlock sensor ect instead, do you have a copy of the instructions for my 98 so I can see what id be dealing with? thanks
nebraskaz71 did you resolve this issue? My 98 2500 truck is having the same symptoms
How do I order one
Hi guys
I have a 1999 Chevrolet suburban 2wd...
My security light comes on intermittently.
This has just occurred since transmission was rebuilt.
Need help ...
How can I get one sent to New Zealand
Cheers
Hello, you should be able to buy one from our eBay store and have it shipped to NZ.
I have the same vehicle, how did it work out?
Where can I order???
I have a 2011 Chevy express 1500
I need to call y'all And get another
Whether the location and s10 2000
Donde puedo comprar uno de eso para mi tahoe 96? Estoy en México
Son para vehículos del 1998 en adelante.
Check out our update video by clicking on our name! Some useful information!
Having this problem with my 99 suburban, bought your product, installed it, still no start security light on full can't get past step 1. So I've spent $150.00 on your product that didn't resolve the issue, any ideas? Before I send it back
Please contact us directly and we can walk you through diagnosis.
Still having this issue even with another box from you. Only now doesn't start and run for those few seconds, just cranks and cranks
@@philipfaris7144 was this resolved? Let us know!
@@ProRebuild no and kinda put it on hold as I had surgery and haven't dug into it again, have tried both new boxes, 1 new change was would not start and run for few seconds, now only cranks,with fuel pressure at injectors
@@ProRebuild I tried calling to troubleshoot, responds was they were just parts house no tech involved
Give me the information
So i have a 98 just replaced steering column iv done relearn security light goes out when turned to on start it it dies security light flashes then goes out and can fire it and dies
if the light goes out, the security is learned. Have you checked for codes in the passlock module? I would clear those first and see what it does.
@@ProRebuild what do you need to get the codes? Do you mean using an OBD2? Thanks in advance, Jose
@@joseburgos5106 I've been told you need the Tech2 scanner, there are others on the market with the same capabilities, one of which is sold at OReilly's. Check the product documentation before buying, they're a couple hundred bucks but they're a good tool to own.
how about 2002 GMC Savana? thanks
NO, that uses a BCM security system.
I have a 2001 silverado the security light stays on constantly will this fix my issues
a 2001 silverado does not use this style of system. This won't work in your truck.
@@ProRebuild just ordered a new Rockies Pro module hopefully that will help me
@@MrCinimod93 did it work?
On one of your videos you say turn it off for 30 seconds the other video says turn it off for one minute which one is it
sorry, off for 1 minute, per gm.
And on dhe dash says theft system ..
How do I contact you?
i need one..where do i get one?
Our eBay link is in the description, visually match your old part to the new one to make sure part numbers match. (there are six different part numbers).
I need one how can I buy it
Our eBay link is in the description. www.ebay.com/usr/pro-rebuild
Still selling them? Looking for one for a 99 k3500
Yes we are. Follow the link in the description.
my light is solid and won't shut off. And can't get it to start. What do you do then. Cycles won't work either
If the light is solid, the passlock module is most likely defective. If you have a scan tool, attempt to communicate with it. If you can't, its likely a bad module. Have you already purchased one from us?
@@ProRebuild since i need my pickup as of yesterday. I'll probably follow the GM Bulletin UI26 and bypass this phony system with a switch.
@@DarkPinesProductions208 please let us know how that works. Its our understanding that that modification only allows the vehicle to start without a key in the ignition and does NOT bypass the module, but merely bypasses the ignition switch.
@@DarkPinesProductions208 did ur bypass work? Having the same problem with my 99 Yukon and I need to get to work on Monday
Where can I buy this
These can be found on our website Pro-Rebuild.com or Amazon and even eBay.
Then sometimes she turns off and comes back on after a min
Security light doesnt come on at all??and no start
Did it ever come on or has it never come on in the time you owned the vehicle? I have a 99 Suburban with security and a 97 without. It wasn't standard equipment.
Hay @Pro Rebuild do you guys have a number I can call for help?
How can I get one
Follow the links in the description.
How can i order one?
Follow the links in the description.
Please help me I need one
Our eBay link is in the description, visually match your old part to the new one to make sure part numbers match. (there are six different part numbers).
What is your contact info? I need to buy one.
Tried calling the phone number you provided with no luck getting through. I left a message on your voicemail. Is there another number to call? I want to order this but I don't want to order the wrong one.
We are open 9-5 cst.
Thanks for the info. Going to pull the part number and order the part as soon as possible. Thanks for offering a much needed part to keep our Chevy trucks on the road.
Joe Cruz, perdona que te moleste joe, queria saver si ordenastes el modulo y si trabajo bien y si es comfiable, gracias por adelantado hermano.
The whole computor system on vechicles that got them are all failure points. got three vechicles 2008 dodge caliber, 2000 seirra, 2007 oddessy all have computors , modules, sensors and can't seem to drive them any lenght of time before a damn light goes on and then code reader gives you multiple things that can go wrong so you spend a small fortune to fix and when you replace what you had to the damn light doesnt go off then try everything to get it off and then boom! it's on again reading the same code it had before! so get it erased and then few miles later another damn light and you fix dat and go through the same thing again! it's one thing or another! So one by one get them running and send them down the road and get a vechile that doesnt have all the WEAK computors modules and sensors.
Each of those have different components, but thankfully they're pretty simple. Chryslers have SKIM modules that are notoriously bad. The odyssey could be anything, and the sierra is usually a bcm issue.
Pro Rebuild. thanks for the input! soon as i can iam gonna sell what i got , don't need vechiles that every two months or so another light flashing that something needs money , gonna go to vechiles 1975 or older that don't have all the computors , modules,sensors, idiot lights. The older vechiles i know how to fix and don't need computors to try to figure out what another computor is dictating from a list of many faults that can be the real problem and end up replacing parts that didnt need and when all new parts installed idiot light back on with same problem. Did all that trying to get emissions test and STILL emissions place couldn't test because their computor said not ready to test so have to put miles for computor on vechile to clear so did that and again same damn thing so now have to make appointment with special emissions place to figure out what the new problem is. Frustrated! 😣
where are you located?
Where are you located
I live in Honolulu my truck is in Texas
My truck runs for 3 seconds then shuts off. I've tried the relearn procedure several times with no luck. Does your module sound like my solution?
When the truck starts and runs, does the security light illuminate, or flash, or turn off? When the key is on, engine off, same question. let us know!
@@ProRebuild Stays lit
@@outlawten5750 if the security light is on solid, this module has probably stopped communicating. You can verify with a decent scan tool, as most have the "passlock" menu. If you can't communicate with it, the passlock module is bad.
@@ProRebuild Thanks. I'm going to try the relearn procedure again along with touching the positive terminal trick. I'm sure i'll be ordering from you soon. lol Thanks for your quick response and help
@@ProRebuild what if the security light isn’t on? Could the module still be the problem? My truck isn’t starting and I’ve just about run out of options
they want you to buy a new vehicle
Hptune it or ls Droid it and it is permanently gone ls Droid is free
Update price is 250 😂😂😂😂😂
You can just remove the box . Problem solved !
I'm in Florida how do I get your number