Piping | Pipe classification | Pipe schedule
Vložit
- čas přidán 21. 08. 2024
- This video explain about Pipe and its classification
Watch: Piping | Draw Isometric Drawing from Orthographic Drawing | PART-1
• Video
Watch: Piping | Elbow Rolling Degree Calculation
• Video
This channel explain about To Draw & Reading piping isometric Drawing, Piping design calculation, Piping take-off calculation,NDT methods,welding,cutting, Pipe fit-up, Pipe fabrication,erection,Elbow cutting, Elbow centre calculation, welding process,p&id details and symbols,valves,pressure gauge, hydro testing details, welding calculation, Pipe supports,Equipment,Pumps,Trigonometric formula application in piping, pipe offset calculation, pipe fitter manual, pipe fittings layout and development(template) and Piping interview Question and Answer for Piping Engineer,QA/QC and Pipe fitters.
Watch and Subscribe: / technicalpiping
Like: / pipingtechniques
EXCELLENT EXPLANATION THANKS
You are welcome!
I just found your channel. Good videos
Nice video. Simple and informative. Good👍
Good and valuable information about pipes
very good information
Thank You It’s Simple and Good explanation.
Sir
Please make a video for basic welding information for inspection plane.
Thank you a lot, super video for beginners.
Very nice, so easy to understand, thanx
Good explain
Very simple & to the point
Very helpful video sir, we want more videos like this,
Thanks for sharing these videos... Easy to understand... Please upload more videos
It's so nice to learn
Thank you sir. Very useful for us....
Sir, video super.Nalla purinjirchi
Supper
Excellent
Informative video... Thank u
Thank you very very much 👍
Anna you are best... subscribed. Thank you for information....👍👍👍👌
Hi sir, thanks for explaining
Gud
Thank u for this video
Very good
Thanks you 🙏
Useful information
Thank you very much Bro
thanx for this awsome video
Good class
Thank you
TQ for ur information
Terima kasih
Pak, atas ilmunya
Kindly make pipe routing concept video
Good tutorial class
explanation is easy to u
nderstand
Thanks
Thanks for your great videos
Very good.....
Thanks
Thank u bro..
Good explain I have been using or seen.
super sir
great
Thank u sir,for clearing the basic concept.Please explain about nominal diameter.
Nominal Pipe size (NPS), it neither indicates OD nor ID up to 12 inch. For pipe size 14 inch and above, NPS is equal to the OD of pipe.
It is generally indicated as NPS or Nominal Bore (NB) or Diameter Nominal (DN).
1 inch = 25.4 mm. So, 1" NPS pipe is called as 25 NB pipe & the OD is 33.4 mm and for 10" NPS or 250 NB pipe, OD is 273 mm. So upto 10" NPS or 250 NB pipe, OD is not equal to NB of pipe.
But the above is not applicable for size greater than 12 inch pipe. From 12 inch above or 14 inch & above pipe size, pipe size is equal to OD of the pipe.
14" NPS or 350 NB pipe is equal to 14 x 25.4 = 355.6 mm.16" NPS or 400 NB pipe is equal to 16 x 25.4 = 406.4 mm.24" NPS or 600 NB pipe is equal to 24 x 25.4 = 609.6 mm.
very good,if it's possible can you explain in the same way hydro test
Very Good & valuable
thanks.share to all.
Good Job Brother.
excellent
According to ASME B 36.1 For DN100 (Schedule=40) OD=114.3mm, Pipe thickness= 6.02mm ,then id =(114.3-6.02×2=102.2)
Then justifiy ur DN definition..
thanks
wow thank you !
Thanks..share to your friends also
Dear Technical Piping sir/team
Thanks for uploading video.Can u describe diffrence between single random pipe and double random pipe.
Single random pipe length is usually 18-25 feet plain end or 18-22 feet threaded and coupled pipes.Double random length pipes are made between 38-40 feet.
Thanks
Excellent and thanks
good explanation
NIce video, Can you also explain in your next videos about Piping Codes and standards, different piping equipments, Speciality items in piping. Please. Will appreciate a lot.
Nice
Plz make a video of paiping allution nd sllove
very informative. need notes of the same. very difficult to write during listening.
nice
Job well done sir, useful for teachers and students as well, a big TQ sir. (plz remove the BG Music)
Bevel end pipes are used for weilding, flat end pipes for grooved fittings.
super
that u so much for delivering this knowledge
Hi. I'm a mechanical engineer graduate. I know softwares such as PDMS & Smart 3D. I've been working as a Smart 3D administrator for about 1 year in India (Chennai). I'm no longer interested in this area and thus wanted to switch over Engineering side which will give me thirst to find solutions. In this 1 yr, I came to know about Piping material specifications, valve materials, codes & standards & also some layouts.
Could you pls suggest me how to switch from this S3D administrator to Engineering side ? Be it Piping layout engineering or Piping material engineering. I just wanna get into any of the above mentioned roles. Please guide me. I'll be grateful to u forever .
Thanks....
Thank you so much, I needed this.
Thanks for explanation
👍
Plz Make a video to calculate Minimum Required thickness/design thickness of pipe
Super machi,,,, just include some photos next time because I didn't understand the pipe ends part
TQ
thanks But no need for music at all
can you explain some about energy pipe
Nice sir but sir aap Hindi me v video banaiye
Thank you so much ,, excellent video tutorial with plenty of information....kindly make the video about schedule such as sch40,sch50
I need some more clear information about the schedules and standards
I will appreciate it
Good video that contain valuable information and I believe addition works on the themes and outlines will defiantly make it better.
I will be glad to assist you on this matter and just let me know.
Thank you for your efforts
From which size seam pipe starting
Pls explain where these different pipes are used
सर आप से निवेदन है कि प्लेट का पाईप बनाने का फार्मूला बताये प्लीज़ सर और मार्किंग करने का भी
दन्यवाद
Please explain 14inch abive
Bhai lt ka heaider marking daliye
Hi, do you do gigs for distillery drawings with all technical aspects for fabrication?
you probably dont give a shit but does someone know of a trick to get back into an instagram account..?
I was stupid lost my login password. I would love any tricks you can offer me
@Ronnie Terry instablaster :)
@Phoenix Trent thanks for your reply. I found the site on google and im in the hacking process atm.
Looks like it's gonna take quite some time so I will reply here later with my results.
@Phoenix Trent It did the trick and I actually got access to my account again. I'm so happy!
Thank you so much, you saved my account !
@Ronnie Terry glad I could help :D
English pandit
Explain me about DN and NPS
I don't need observations i need why their calling for?
Hi pandit,
Nominal Diameter is also known as the mean or average outside diameter and is represented by DN. It is neither equal to the inner diameter (ID) nor the outer diameter (OD) of the pipe. Nominal is a word that denotes non-specificity and in this case, identifies the approximate inner diameter with a non-dimensional number.
The terms nominal bore (NB) and DN are used interchangeably with NPS. DN is the European equivalent of NPS but shows pipe sizes differently than NPS. A 2-inch pipe may simply be referred to as DN 50 and to convert NPS to DN it has to be multiplied by 25.
Based on the NPS and pipe schedule, the OD and pipe thickness can be obtained from standard reference tables. For a specified NPS, the OD remains constant and the wall thickness increases with the schedule. Similarly, for a given schedule, the OD will increase with NPS while thickness stays constant or increases.
Please remove music, otherwise excellent
Sir please tell me how to select size of pipe
thx can you load video about pipe colour standard for cs as ss ltm.
super
For accurate measurement and drawings just refer IPC 99 Mobile App from google play store
1 tip : invest in a good microphone
I need a software to drewing piping isométrique ?
I want say Nominal Bore (NB)
Hi have you been offered any freelance work out of these videos
I didn't understand the part I was looking for (pipe schedule). The accent is too strong.
Could someone explain me what is pipe schedule?
Thanks in advance.
Good charts; just can’t fully understand what he’s really saying.
Sir xxs xs ka meaning smj nhi aaya
XXS-Double extra-strong
XS-Extra-strong
Lagwej Hindi me chahiye
Hindi me jsnkari dijiye
Which institute in best for piping design course and job assistance is very important sir so pls give me information sir
Are bhai.... Aavaj thik nhi aata... Dikhta bhi nhi kuch... Kya kr rahe ho
Sir your voice is not clear and also your writing.
Ohh..sry of inconvenience.
Hardhet engineer copy
is it? ohh gud..
refer: process piping book.
Excellent