How to Balance Moza Aircross 2 [ Step By Step Balancing Gimbal Tutorial ]
Vložit
- čas přidán 9. 10. 2019
- Moza Aircross 2 Gimbal: bhpho.to/2ZxXDYM
The Hyphenate does a detailed step by step tutorial on how to properly balance your camera on the Moza Aircross 2 gimbal/electronic stabilizer. He balances the Sony a7iii camera with Sony FE 28mm f2.0 lens on the Moza Aircross 2.
BUY GEAR FROM AMAZON:
Moza Aircross 2 Gimbal: amzn.to/2mecTev
Sony a7iii Camera: amzn.to/2I6a61O
Sony 55mm f1.8 Lens: amzn.to/2I9jeCA
Sony 28mm f2 Lens: amzn.to/2E4Zs7k
Sony a6400 Camera: amzn.to/2GFmALh
Rode Wireless Go: amzn.to/2kT8VYN
Fluorescent Lighting Kit: amzn.to/2mAKVdi
BUY GEAR FROM BH PHOTO/VIDEO:
Moza Aircross 2 Gimbal: bhpho.to/2ZxXDYM
Sony a7iii Camera: bhpho.to/2F8H7b1
Sony 55mm f1.8 Lens: bhpho.to/2CpLTgE
Sony 28mm f2 Lens: bhpho.to/2F8lhEI
Sony a6600 Camera: bhpho.to/31ivnKH
Sony a6400 Camera: bhpho.to/2FLt37S
Rode Wireless Go: bhpho.to/2me5P1t
Fluorescent Lighting Kit: bhpho.to/2BaWZqL
---------------------------------------------
THE HYPHENATE'S MAIN CZcams CHANNEL:
/ thehyphenate
The Hyphenate's family-friendly gaming channel:
/ supersmashbrothers
---------------------------------------------
THE HYPHENATE'S SOCIAL MEDIA LINKS:
www.DoubtMe.net
/ thehyphenate
/ thehyphenate
/ thehyphenate
PSN: TheHyphenate
The Hyphenate's music available on Spotify, Apple Music, and all other major digital music stores/streaming apps.
#Moza #Aircross2 #MozaAircross2
Question now with the quick release plate, you mentioned not having to re balance. Can I put my gimbal back into its case and not have to rebalance the next time I use it? 🤔
Amazing video brother! Quick Question, I'm planning on vlogging and have a Sony ECM mic and was curious how to balance the camera with that on there as the weight would theoretically throw it off If I balanced it without mounting it first. I've tried attaching the mic and then balancing it but the mic hits the gimbal and doesn't allow for proper calibration. Do you have any thoughts on what I should do? Thanks in advance.
Thanks man it was what I needed after a ton of other videos
awesome video yo THANK YOU! i have a big shoot coming up for the smithsonian and i bought this gimbal. i was super overwhelmed with anxiety after watching and taking notes IM GOOD!! =]
Happy to help. Hope your shoot goes well. Thanks for watching. 🙏🙏
Thanks for your help, very useful video for me, aircross 2 works perfectly for my G9 + 12-60 Leica
Happy to help. Thank you for watching. I appreciate it 🙏
Great clear instructions mate. I am struggling with the tilt balancing of my canon 750d with a Tamron 24-70 lens. It seems too heavy towards the front and keeps tilting towards the front. Can you suggest anything?
Sometimes as you get a good balance and then move on to the next axis and balance that, you might have to go back to the axis from before and make tiny adjustments. I sometimes have to slightly adjust each axis a little after doing every step and then it works better. The bigger lenses usually need those extra refinements.
Very Great video, it helped me how to balance my Lumix G7 on it. But my question is, when I’m finished using the gimbal but don’t want to lose the balance by keeping it in balance for next time usage, what do i do? I was told to never leave the camera on the gimbal and to never leave it unlocked
Great demo thanks
Happy to help. Thanks for watching 🙏🙏
Just got this gimbal and balanced it correctly. I have a sony a7r III with 24mm f/1.4 GM attached. Balance check confirms that everything is balanced correctly, but as soon as the check completes, the camera is left pointing upwards and the gimbal in sleep mode. Once I get it out of sleep mode, it seems to work alright. Re-balanced it number of times and checked, but its the same behaviour every time. In your video, looks like the camera is pointing forward after the balance check. It makes me feel that I got a faulty one.
Please Help! first, does this gimbal work with Canon R5? I bought it and been trying to use it with my R5... it balances on the 3 axis that the gimbal confirms but when I roll it sideways the arm carrying the R axis hits the lower motor part because it is so extended that there is no space for it to pass without hitting the lower part. I have tried severally but this seems to be the only way my camera balances. Any suggestions? can anyone else confirm they have use R5 with this aircross 2 gimbal?
Can you please make a dedicated tutorial on its vertical balancing
Is it compatible with Nikon Z50 camera?
Thanku soo much... Nicely explained ❤️👍
Very useful video❤️🔥
Happy to help. Thanks for watching 🙏🙏
Bro, thank you!!! That was a very well explained tutorial on the Aircross 2, and just what I needed to get mine up and running. Thank you again.
Happy to help. Thanks for watching. 🙏🙏
you prolly dont care at all but does any of you know a trick to get back into an Instagram account?
I stupidly lost the login password. I would appreciate any tricks you can offer me.
@Elian Roland Instablaster =)
@Caden Shepherd I really appreciate your reply. I got to the site through google and I'm trying it out now.
I see it takes a while so I will reply here later when my account password hopefully is recovered.
@Caden Shepherd It did the trick and I now got access to my account again. I'm so happy!
Thank you so much, you saved my ass!
Great man, I am considering this one for my vlogging channel
Thank you for the support. Yeah it's great!
You’re welcome, btw wondering if you have used ‘iFocus-M Motor’ along with the gimbal which comes in professional kit?
Sorry if I missed it, what quick release plate is that?
It's included with the gimbal
Thank you so much.
Happy to help. Thanks for watching 🙏🙏
Great work thank you, Is canon rebel sl3 (250D) compatible with Moza aircross 2 as it is not in the compatibility list?
Yeah it will work with that camera as well
Thank you
@@Ibnmasr101 Happy to help. Thanks for watching
How to balance it vertically?
Everything is fine my camera stayed at it's place but when i autotune this gimbal it is showing less then 70 percent in all three axis although balace check shows well balace in all the three axis, do i need to worry about this.
No worries at all. Should be fine
Why my Moza air cross 2 keeps vibrating when I let it turn either way
Man, finally balanced and did everything but | need your help, rec button on Moza does nothing, how do I force it to communicate with my Nikon Z6 so I dont have to press rec on my Nikon Z6? I am complete noob here, the rec button on Moza handler does nothing, thanks for your help
LOL, I did it, just deduction and use of logic, I am an idiot, I think wirelessly (blutooth) and all it needed was manually connect these two devices through usb port 😂
Glad you got it going
Thanks alot... I was stuck on the Please check for P Axis... i kept thinking i didn't do it right lol
Happy to help. Thanks for watching. 🙏🙏
So after I figured that part out I updated the firmware in Boot Mode and now the Gimbal wont come on at all🤦🏾♂️ I'm waiting on Amazon to send me another one tomorrow.
Oh whaaa? That's weird. Did you take out the batter and put the battery back on?
Bro help me. . .
I got moza aircross 2. .
My setap is (a6300+battery grip+sigma 16mm f1.4). All this setap my payload only 1.4kg. .
Why i con't use this setap on my moza aircross 2?.
I get good balance for this setap but when i try on the gimbal. . The gimbal go shake like crazy!
After you balance, always do an autotune so the gimbal knows how much power the motors need. After every new balance, always do the autotune
@@DoubtMeTech already do the autotune. . .and already chek the balance. . .all good. . but still the gimbal go crazy on the shake
@@HantuBorneo have you done a firmware update?
Hey bud while I was balancing the camera and did the balance check it showed me
C adjust to-
T well balanced
R well balanced
What does the C letter mean so I could balance it accordingly. Thanks you for your videos!
Each axis has a letter. Look for the letter on the gimbal
Hi! Great simple tutorial but I'm having issues! I balance the axis but when I turn on the gimbal it gives me error 1381. I can go in to the menu and as soon as I "turn on" the motor menu comes up, but
for some reason the motors are not working? It says no update needed? I'm going nuts! Just bought it today! What am I doing wrong?
Thanks in advance!
Reset your gimbal. In the menu there is the ability to reset the gimbal (I forget where exactly) but that will most likely fix your issue. It will wipe out any settings you previously had and it will start you off as if you just turned it on for the first time. Let me know if it works.
@@DoubtMeTech chatted with support last night and in 2 seconds they told me to return it, that it's a faulty gimbal?
Sometimes electronic devices come out defective. Get it replaced. Once you get one that works you'll be happy with this gimbal. It's awesome!
@@DoubtMeTech thanks for the reply!
@@JohnReynolds123 thanks for watching
And vertical?
Same idea, just attach the l bracket in position for vertical camera mounting
you shoul extend the video up to the cabling with gimble & camera..
If I eber get it working...I'm never detaching again...
What do you mean?
Now I realized HUGE problem no one was talking about!! When I have my Nikon Z6 put on this gimbal, I cannot have my Rode microphone on top of my camera???!!! So I can achieve steady picture only with crappy sound!? With Rode unplugged? If so, it sucks hard
I have a solution for that... attach it to the 3/8 mount in front of the gimbal.
You will need an adapter, watch this video for inspiration: czcams.com/video/h9Vr2RnzoC0/video.html
You will need to add a cold shoe mount to the articulating arm. This is how I attach my audio source to the gimbal so it doesn't add weight to the camera on the gimbal
Doubt Me Tech yes, but not only additional weight, that would not be a problem, but I found out, I can not do that gimbal balancing with it on, because I can do it sideways with Rode on, but not balancing upside down, because Rode is hitting the holder metal edge, this really annoys me so much! It should have been advertised with warning, no microphone on! As you said, now I must be looking and buying extra something again, steady picture with shitty sound
Do what I said. Its worth it
@@DoubtMeTech I will do it, that is the only option, thanks, but this really sucks to me, I am constantly buying extra something, f.e. I wanted to update my Z6 to firmware 3.0 but I must do it through XQD card firmware upload - but I needed to buy special PC card reader for this type of cards that Nikon uses (very weird one), my notebook has SD card slot but not this XQD card format - and now gimbal, expensive on its own and yet, I need something else to use my microphone, I am waiting for the day when I have everything - of course f.e. flash, no built-in flash, I have to buy that one too :D
My inception mode was going to sleep because p axis wasn't properly balanced, going to try balancing it your way now
This way will definitely work. Thanks for watching. 🙏🙏
Is there any professional out there where i could go lmao im having TROUBLE
What do you mean? What are you having trouble with?
shit, this is so complicated
Once you do it a few times, you can start to do this in about 3 minutes or so
@@DoubtMeTech they could at least make it easier by delivering this L shaped camera holder assembled - out of the box, I kind of hate puzzle/Lego deliveries
Got to be the most annoying kit to set up in history