Video není dostupné.
Omlouváme se.
MELT STUFF - How to Make a Foundry | ask jeff Williams
Vložit
- čas přidán 16. 08. 2024
- How to make a foundry that reaches temps well over 2000 degrees that runs off of Propane that you can melt most metals with. Now you can melt stuff
__
SUBSCRIBE BY CLICKING THIS LINK: / @askjeffwilliams
FOLLOW ME ON THE WEB AND GET BEHIND THE SCENES :
Instagram- / lila_the_explorer
Patreon - / askjeffwilliams
Web -- www.askjeffwill...
Facebook -- / ask-jeff-williams-1414...
Links to equipment used in my videos:
Gold Panning Equipment :
Panning Stand: amzn.to/2YQnkI1
Garret Super Sluice: amzn.to/2yTbBsv
Garret Gold Panning Kit: amzn.to/2H4Skc9
Snuffer Bottle: amzn.to/2yYyw5C
Mining Tools:
Jewelers Loupe 10x: amzn.to/2Z5xaRy
Estwing Rock Pick: amzn.to/2Z1tCzt
Hard Hat w/ Light: amzn.to/2YH3PRX
Light for Mining Hard Hat: amzn.to/33t0BjH
2 mode Light for Hard Hat:amzn.to/2H4TkNp
Large Paleo pick: amzn.to/2H4XgxA
Metal detecting equipment:
Whites TRX Pinpointer: amzn.to/2H39siy
Falcon MD 20: amzn.to/2Kxhp1I
Whites GMT w/ extra Coil: amzn.to/2KGROCj
Garret ATX Metal Detector: amzn.to/33rDG8o
Minelab Gold Monster 1000: amzn.to/2Z9erIV
Minelab GPX-4500 Metal Detector: amzn.to/31JKUDh
Minelab GPX 5000 Metal Detector: amzn.to/2H3GPSt
Minelab GPZ 7000 Metal Detector: amzn.to/2MZe6Sm
Large mining equipment:
Gold Hog Multi Sluice: amzn.to/2TptCZ5
Gold Cube: amzn.to/2TrH26J
Gold Cube Trommel: amzn.to/2TrH26J
Gold Hog Sluice: amzn.to/2H3lLeu
Cobra Crusher: amzn.to/2KtAJge
Hammer Drill: amzn.to/2yWoqCl
3 by 4 Jaw Crusher : www.911metallu...
Impact Mills : www.makeyourown...
Filming Equipment:
Cannon EOS Camera: amzn.to/2yWE94m
Microphone for camera: amzn.to/2MXo72l
Go Pro 7 Black: amzn.to/2Kx4KvH
Editing Software: amzn.to/2YYa52R
Adobe Premier Pro: amzn.to/2H2D27P
Books :
Gold Mining in the 21sy Century: www.amazon.com...
Fistful of Gold by Chris Ralp : www.amazon.com...
Follow the Drywashers: www.amazon.com...
Prospecting for Hardrock Gold: www.amazon.com...
OTHER VIDEOS YOU MAY LIKE:
RICH GOLD VEIN FOUND !!!! Epithermal Deposit.
• RICH GOLD VEIN FOUND |...
Sluice Box Set Up.
• HOW TO FIND GOLD | Slu...
Biggest Clean Up in CZcams History.
• BIGGEST CLEAN OUT YET ...
GOLD in the SIDEWALKS of MANHATTAN.
• GOLD in SIDEWALKS of M...
THE GEOLOGY of GOLD !!! What Rocks and Minerals to look for.
• THE GEOLOGY of GOLD - ...
How to Find Gold !!! In Rivers and Creeks.
• HOW to FIND GOLD | In...
HOW to FIND GOLD with a BLACKLIGHT !!!
• HOW TO FIND GOLD | Usi...
ROCKS and GOLD !!!! Geology 101
• FIND GOLD in ROCK'S - ...
HOW TO FILE A MINING CLAIM !! Lode and Placer.
• HOW TO FILE A MINING C...
MINI JAW CRUSHER !!! For Gold Mining.
• JAW CRUSHER | For Sale...
GOLD FROM PYRITE !!!! How To Do It
• GOLD FROM PYRITE !!!! ...
Secret Gold Mines
• Secret Gold mines
So you know what I am gonna say huh....you better...
So C'mon....Let's Go !!!!!
#askjeffwilliams #DIYfoundry
Best video EVER, 55 years metal fab typing here, pure..simple..effeciant...kudos Jeff!
thanks Barry
Showing some people "how to do it" doesnt always work IF the person has almost NO EXPERIENCE with tools, etc. Jeff, you totally nailed this, in everyway...words are not needed..
thanks again my brother
I was planning on making a foundry from a old propane tank but I think Ill be going with the barrel design now instead. Your foundry looks very nice and convenient. Great video Jeff
The barrel is super nice, my friend made his backyard found dry too... These videos from these handy men are wonderful! czcams.com/video/e6par0ctTAg/video.html
What size barrel is that? I only know the 55 gallon types and this looks smaller
@@markman63 looks like a 10 gallon to me. They're about 100 bucks online
I have been waiting for soooo long to see an actual good build video of this type of foundry. I have been itching to make a foundry for so long, so I can start smelting and casting ingots for my lathe build. I like to make tools from steel and aluminum and I needed a great tutorial for my next phase. Thank you jeff. I am a long time subscriber and will continiue as always. Love your videos friend!
JEFF WILLIAMS HAS A BIG SACK FULL OF MAD SKILLS. AWESOME DIY BUILD. GREAT VIDEO
Ain't got a furnace, but you wanna smelt Au.
Then just watch ol' Jeff Williams son! .
He'll show you what to do!.
Good one mate!
Nice foundry dude, I like the attached lid idea with what seems to be a safety lock
After all these years and I just now saw this video…. clean beads, professional work. Strong hands that can still finesse out some Rockin Metal riffs!
thanks
one of the best no bullshit instructional videos I've ever seen... I don't need 10min of cutting around a tube..etc. well Done!!
thanks
Jeff Williams you my hero. It is such a relief to watch someone build one of these that is not an idiot.
thanks
I’ve built my own as well and well it probably would have been easier and perhaps cheaper to just by a manufactured furnace however I am a DIY,er and I love that I built it myself and not someone else!
My man, you have to break this down step by step, because this is awesome
thanks
I’m with you.
I want to build a furnace but this wont tell me anything except this guy is really good
Jeff williams you are a Genius. I love it👌.
The best build Ive seen on CZcams! Awesome
Well Jeff! That was the first one I went to. Your name did have something to do with my selection. But I'm betting without looking at any of the others that yours is the most professional, best-looking, probably most functionally efficient model out there. Excellent! Thank you.!! Going to use it to melt down gold hahaha. I believe in Providence. This morning I wasn't even looking, yesterday I was thinking got to find the history of volcanoes and this continent and there it was without asking, deceased volcano Mound in this country. Son, I'm a-goin pannin.... sometime this year. I am poor disabled without disability you know without money no you're not disabled George. Oh that's why I can't stand up and walk and sit down
Thank you very much Jeff
Pure cement is heavy and prone to cracking.
I used fiber insulation at first and it was fine for aluminum, then when I wanted to retain more heat for melting copper, I used a layer of Satenite over the fiber insulation and it worked great, and the whole unit minus the propane cylinder is easy to pick up and carry.
This has got to be the best backyard furnace video I have ever seen
goood job
thanks Jason
Video is a little short, but one of the best furnace builds I've seen.
I like where he cuts away the wasted time as he's sawing through a barrel or whatever. That is great! One of the good features, but not as good as the product
The lid is impressive how you made it tight fit yet easy to swing open. Great shtuff ! Everyones burner contraptions leave me to wonder though...
Thanks 👍
Consider building a fire barrel circle bound with metal strapping,, or aircrete bricks with water glass treatment. Set it on a raised circle fitting inside so that
sides can be lifted after a spill.. Propane is clean and easy, but maybe used oil is cheaper. With air pressure. spray..
Jeff I have great news!! I just bought a Cast Master foundry!! I can now start making my own gold bars!!!😃😃😃😃😃😃⭐⭐⭐⭐
I'm gonna make you a gold bar with the gold I get from my neck of the woods!! I'm sooooo excited!
Also I'm breaking ground at my mine the 2nd week of July!!
The geology is identical to what you have!! How absolutely crazy is that!!
I'm just so excited man!! My dreams are finally coming true and I own it all to Jesus, years of study and you, my motivator!!
Thank you for all you do jeff!
God bless and give slim a high five for me!!😃
Nice build dude lol. The only part I didn't understand was the gas fittings that you are putting together. It was to broke a small on my cell phone. But I can figure it out I like the way the top swings out. Perhaps there should be a guard from idiots walking into it. LOL
Thanks Jeff I was planning to build one this summer.
I was working on mine today... And then... I saw your video! Great minds think alike!
Jeff you officially blew me away with that video. If that was you building that furnace, than there are no end to your ability’s. Great job
Thanks Mark and yep that was me....
Nice build out Jeff 💪,I just did one out of a propane bottle.
Now that;s a hot item for sure.Great job on the furnace.
Just started watching, but gotta make one of these! Thanks for uploading buddy
KleshGuitars howdy stranger 🤠
Hey buddy! I mean..G'day Mate, how ya goin?
Doing good mate🤠
Jeff makes it look easy. I hope to find the plans for this unit. Thanks for sharing.
we use to sell the plans .
Thank you Boss👍 Excellent job👌 A true master of Backyard Foundry🙏
Low duty Stich weld tacks to thin barrel oh yeah!
Jeff is a renaissance man! Great short and sweet video!
Great idea, well planned thank You Sir
I could follow everything except the very first bit. Whats the arrangement btw the gas line and the very first iron fitting. Did you leave that out because thats the regulated plumbing bit? Or is it a fitting you can buy? Salvage off an old BBQ?
I don't think you understand what a "how to" video is. Now, I don't claim to be an expert by any means, but I do believe a how-to video is supposed to do more than just show off what you've built. I've even heard of people going so far as to explain what they're doing.
Dang ain't that a top notch machinery there!!! Like the lid and how it rotates off like that, super fancy. Wonder if it would melt my gold specks and powder and won't blast and blow it all over the inside.
thanks and it will
cool stuff, great idea, especially i like the lid that swings away to the side
What a great idea.😉👍I made one a bit like it set into the ground and used clay for an insulator but it ran on coal with a hairdryer for air sonny Jim.
Interesting burner build. Have everything but perlite and cement here. Time to melt some cans.
Thats a nice furnace, nice build
thanks
Very very good Jeff ;the best DIY one I’ve seen you are a tremendous blessing from the classroom to the field ,above and below ground ; and every thing in between with all of the tools and tricks of the trade be it drones, detectors ect. You sir are simply the best. Thank you 🙏 for all you do and the passion you do it with. If my situation was different I would definitely be supporting you financially but know my heart is with ya Best wishes in all your endeavors tell ole slim I said hello 🎯I would love to make a trip out there and do a little panning with ya but unfortunately life has other plans maybe I will get to pan a little of y’all’s paydirt before it’s to late keep up the great work and MAY GODS RICHEST BLESSING BE YOURS 🎯
thanks , really appreciate that
Fantastic.
I will have to have a go..
Happy Easter 🐇🐣🐰 to you all.
Cheers Tony & Wendy 👍🤓🍺⛏
Nice! That's on my list of things to do. After getting a house and space to build it
Jeff your such a bad ass! I dig the toons too.
I love it, and want to make one but I'm worried not all viewers know how dangerous cutting open and welding an empty drum can be..Very real explosion hazard if not purged and cleaned properly. Make sure you know what was in the barrel!
that is why we said the drum is new in the description box.
Listen here, Sunny Jim!!! When you do a how to video, you need the "A-Team" soundtrack!!
:)
I know...right
Here's a thought... Build one and include it in your next drawing! With a set of the tongs. A propane tank can be had for a reasonable price. But that design is awesome.
Well Jeff that would be an awesome build. You think you might do a slightly more detailed video there whipper snapper? And did you finally bury Slim ain't seen him around? We wanna here from the real gold hound, and all we hear is this Jeff Williams guy.LOL And he didn't TELL us diddly squat in this video.
Cool bro you are the Jack of all trades. Thank you
Now that's a super cool design..😎👍
Did you do a drying process before first smelt? If you do your furnace will last much longer. Keep pressure at about .03 to .08 and slowly heat that a few times letting I cool and heat Id say 3-8 times. It cures that foundry cement or the castable firebrick which I use in my foundry. Also would highly suggest using ceramic wool installation then us the firebrick or foundry cement. This makes a long lasting furnace that can take even hotter temps.
Wow looks better then some of the purchased ones I’ve seen
Sunny Jim is there anything you cant make?..This video is MOST EXCELLENT........
thanks and certified welder too
@@Askjeffwilliams It does show, looking at your beads very smooth..
Really like the foot press to allow for pivoting.
Great job you a man of many talents.
Jeff for president!
and I approve this message
That’s awesome 🤠. When are you and slim coming down to Australia 🇦🇺
You rock, Jeff Williams. I need to find some gold, so I can build one of this!!
Thank you for all the wonderful knowledge you share with us on your videos! And yes..... I know what you are gonna say!
thanks Jose....really apprciate that
you are the man Jeff!!!!!!!!
I thought it well thought out and ruggedly built.
Recently I obtained a corningware™ sauce pan. It has a handle which I believe might be a weak spot P I thought I'd cut it off it is my hope to cast a brass bell of about 8#s with it.
Great build, easy to understand
You are a man of many talents..Keep them coming!!
This guy sure knows his fire and metal. I think I will go on ahead and subscribe!
thanks Barry
When you fuse that lead at such high temperatures you need some flux! glass, borax, sodium carbonate - something. Those yellow fumes are lead oxide and nasty stuff. Yellow snow may be bad, but yellow smoke is even worse.
Awesome idea, going to try myself, thanks
Jeff Spicole from Fast Times At Ridgemont High.... Awesome! Totally Awesome!
Fantastic! Will build one. Love it!
Nice job Jeff.
I scored a free oxygen maker for in home use, I run that into my burner tube during heating and it ups the fire nicely.
Awesome build Jeff!
Not only a gold minor hes a super Fabricator. 💪🏼💪🏼
thanks
And just like that you just gained a new subscriber. Thank you
NICLEY DONE I MUST SAY COMPARED TO SOME OF THE COBBLED UP UNITS
I'VE SEEN ON THE TUBE
thanks
Bloody awesome job mate it looks amazing the only thing I seen wrong was you didn't grind the paint before welding on the drum other then that it's perfection.
I used ferness brick instead of refractory cement . Same same. I built mine for making knifes.
Jeff,Nice job!
I’m about try and make my own foundry out of one of my old Scuba tanks
Nice, all I need is the tools as well plus the accessories but still, nice job
great project, well paced video.
Glad you liked it!
What a slacker! he plays with aluminum and slim is digging all the gold! Way to go Slim!!
That is Wicked kool Jeff and got to be one of the best furnace's I have ever seen built by hand.
ATB GL & HH
LittleJohn_MD 🇬🇧
Thanks LJMD
That's a legit build!
Dang sonny jim, that is awesome.
sure wish I had more confidence in my welding. That is as good of better as some I have seen
Good Job Jeff
thanks
Super awesome. My son and I did the same thing but yours is way better. Really it’s great and love the DYI concept.
But Jeff now listen what’s up with the mine noises have you been able to hear the source?. Just kidding love the videos.
Thanks a lot im melter now i subscribed
Thanks for subbing!
Nice job Jeff! Thanks for the education and knowledge!
You are an artist my friend . Great work! 🤘🏼⛏
This melting furnace, is very good!
Brazil.
jeff! your the man thats a nice build!
thanks ..we can cook up some good beans in that thing
Okay, I realize I commented a few times but holy shit, Jeff. That is a seriously kickass design for your foundry. Someone building that would charge you a $1000-2000 if you didn't know better.
It's stuff like THIS that people should realize the true value that you can immediately save yourself a ginormous amount of money for.
How hot does she go? Like can you melt bronze and stuff as well?
Get a life..... stop commenting...... this is like the 5th one ive seen..... go outside.. live...
How much refractory cement did that take and what was the ratio of perlite to cement?
I used to have a Lindsey foundry. Bought the book to make the foundry and the crucible.
Jeff, at minute 2:25 why did you put a hole at the bottom of the foundry? By the way we just finished building our foundry just like the one here in your video! But we didn't put the hole in the bottom....we may carve one into the bottom but why would it be needed?
Some DVDs with commentary would bring in a little money but more importantly would provide dimensions for the burner parts, which I suspect are important for proper functioning. Great video as always, and you didn't even get wet ( unless you count sweat ).
You should look into k-wool.
Cost is about the same as refractory, but it lasts longer, it's tons lighter, much faster construction .
It's also super efficient on propane.
P.S. I'm one of your oldest subscribers and love your videos.
Keep'm comin!!
Hi Roger yep we figured that out after the build.... Thanks for the info and for the long time viewership...really appreciate that
Pretty sure you voided the warranty on the nonstick pan. lol Nice build. Thanks for sharing :)
😁
Thanks Jeff
"Yay your gonna get dirty" great job jeff.
Marvelous Mr Jeff