Thanks, having arrived home from work to a cold house and a worried family they looked upon me as I’m an electrician to fix the problem. Your video made sense to me but the overnight wait didn’t go down to well and then I spotted in the comments about manually discharging the capacitor. What a brilliant idea and is worthy of updating your video. This was easily achieved just but using a pair of side-cutters and going across the + and - battery terminals (do both ends) of the ‘stat. On inserting the batteries the display came to life and the heating started up. Many thanks to you and to the person with the great advice
Great it worked , i instead leaving it overnight , did a short circuit to the battery terminals , i believe it discharged the capacitors inside the unit and reset every thing back to factory settings
There is a capacitor in the thermostat that needs at least 30 min to discharge before putting in new batteries. This is not mentioned by Salus in any of their instructions which is disappointing. I previously bought a unit to replace what I thought was a faulty unit and the unit was fine.
Also there are two little switches inside the back, for some reason they switch to off, might be something to do with low battery, just switch them back to on and put new batteries in.
I had this exact problem, first screen stopped lighting up when u press buttons then it just went blank , tried 3 different sets of new batteries and nothing happened , seen this video took battery out for approx 12 hours put new ones in and it works again so thank u for video.
Our receiver has been acting up for a week or so. I changed the batteries and it worked for a few days until now, the screens gone blank. I'll try your way and leave batteries out for an hour and see....
Question can a different thermostat work with a different brand of receiver? And can a different make say 510 work with a 520 receiver of the same brand
Good video. I have just notic that my salus remote isn't working. No screen display. I have put fresh batterys in and still not turning on. Is it ment to turn on automatically? Cheers
Our display works - but the 'heating' icon not showing, even when we press the manual 'hand' icon. And therefore heating not coming on either. Water working fine though.
Our Salus died, sceptically tried the batteries out for 24 hours, now works perfectly. You sir are a genius, my family thanks you.
Thank you. Left the batteries out all night and when I put them back this morning, it sprang back to life.
Like witchcraft .lol glad it worked
No need to leave overnight, just wait 5 mins before putting the new batteries after removing the old ones. :-)
Thanks, did as you said, batteries out overnight and now working. Was about to buy a new unit. So thanks again for your video.
No problem please subscribe to support the channel
Thank you so much, took the battery out for 30 min and then reinserted new set of batteries and then it came back to life.
No worries glad it worked. Please subscribe to support the channel
Thanks, having arrived home from work to a cold house and a worried family they looked upon me as I’m an electrician to fix the problem. Your video made sense to me but the overnight wait didn’t go down to well and then I spotted in the comments about manually discharging the capacitor. What a brilliant idea and is worthy of updating your video. This was easily achieved just but using a pair of side-cutters and going across the + and - battery terminals (do both ends) of the ‘stat. On inserting the batteries the display came to life and the heating started up.
Many thanks to you and to the person with the great advice
Will do
Yeah that fixed it. Changed batteries and no display. Who would think a design flaw like a capacitor needing discharged would be such an issue.
Great it worked , i instead leaving it overnight , did a short circuit to the battery terminals , i believe it discharged the capacitors inside the unit and reset every thing back to factory settings
That's a new trick thanks
There is a capacitor in the thermostat that needs at least 30 min to discharge before putting in new batteries. This is not mentioned by Salus in any of their instructions which is disappointing. I previously bought a unit to replace what I thought was a faulty unit and the unit was fine.
That's correct batteries out overnite often fixed things
Also there are two little switches inside the back, for some reason they switch to off, might be something to do with low battery, just switch them back to on and put new batteries in.
From memory 1ts 0.5 or 1 degree option to thermostat sensitivity and 7 days or 5+2 programmability ?
I had this exact problem, first screen stopped lighting up when u press buttons then it just went blank , tried 3 different sets of new batteries and nothing happened , seen this video took battery out for approx 12 hours put new ones in and it works again so thank u for video.
your welcome
Our receiver has been acting up for a week or so. I changed the batteries and it worked for a few days until now, the screens gone blank. I'll try your way and leave batteries out for an hour and see....
Good luck be aware however these things do go wrong
Thank you so much worked a treat
Great advice
Your welcome thanks for the positive feedback
I did everything you Said, i took out the battery and im leaving it overnight, i hope it works if it does you sir have earned yourself a sub
Here’s hoping for the best
Did it work?
@@timeintheuk yep
@@timeintheuk thx
@@timeintheuk you earned yourself a sub
Thanking you
Your welcome
Question can a different thermostat work with a different brand of receiver? And can a different make say 510 work with a 520 receiver of the same brand
No it won't .
They are so cheep anyway. Just get a new set 60 pounds
Thank you
Good video. I have just notic that my salus remote isn't working. No screen display. I have put fresh batterys in and still not turning on. Is it ment to turn on automatically? Cheers
Yes. Try removing battery's for a couple of hours or overnite and put em back in
press the reset again - holding it in to not have to wait the 10 minutes
Thanks for that
My salus st620wbc shows H1 and cannot take it of or set anything
Can i remove H1 code off my thermastat
Your only chance is the remove the batteries over night
If fault persists it's prob done..there's a lot better controls out there now
Our display works - but the 'heating' icon not showing, even when we press the manual 'hand' icon. And therefore heating not coming on either. Water working fine though.
Do you have the small green light on the recever? When you hit the up arrow to 25 what happens. When you hit it down to say 18 degrees what happens.?
Trashhh
Wow 3 hhh z
Not so trash