Replacing Cam Cover Gasket on Saab 9-5 - B235R
Vložit
- čas přidán 11. 09. 2024
- A quick guide demonstrating how to replace a Saab's Cam Cover Gasket. I replaced mine on SEP 2021, I was not aware it was filming whilst the microphone was partially covered, apologies for the poor audio.
The following is required:
T40 Torx screwdriver
Flat head screwdriver
Cloth
New Gasket
Cable ties
Cable cutter (narrow profile)
Kontakt 61
Bolts should be torqued to 15Nnm/11Ib.
Can I ask you for something? I prob. have issue with knock sensor and I trying diagnose this - can you tell me if on the plug on 6th PIN (which is one under the blank one (left bottom)) if there's voltage? On WIS is written to check if on PIN 6 & 7 is ~5V but I have only on 7th and I'm not sure if they meant 5V on both PINs. The ignition should be in ON position. I would be so gratefull! I have B235E I run it for 10 years and last 12 months was just a pitfall for money. I'm in debt already and have no more energy to pull it further so I'm asking for help. And since I saw this connector at the end of the video, I thought that maybe you would help 🙏
If you are suffering from misfiring or knocking from your B235E, there's a good possibility it is the Direct Ignition Cassette (DIC) or ignition coil pack.
Swap it with a used working unit and see it performs.
@@the80sdude51 I just changed it ~1yr ago for about ~€400. And it's strange because it's like cuts off fuel but only from so damn occasionally... Can you please just check this one thing for me in free time? Then I will be able to exclude this thing at worst and at best diagnose it with proof (: