Kubota BX23s with Land Pride Snow Pusher vs 8 inches of wet snow!
Vložit
- čas přidán 29. 12. 2020
- Another snow storm in the midwest! This time I got to test out the snow pusher a little harder than the last video. This snow was wet and heavy!
please like and subscribe!
That snow pusher is the ticket!!! Great video 👍 thanks for sharing 🚜💨💡😁👍
The snowpusher did a great job, nice garage also 👍🏻
Appreciate the comment!
You did a great job moving that snow with the snow pusher. Thank you for sharing!
Appreciate the comment!
0m)pas
I have the bx23S as well. What a great little tool.
Excellent video. Really gives you a sense of the pusher.
I have a 300ft drive and big pad to do. For the last several years I just used front loader. It always got the job done but slow.
This year I got a land pride 60” rear blade that I plan to use with my front loader. I just got yesterday. Of course the snow is melted now. 😂
Anyway placing rear blade very offset so it hangs out past the side and catches overflowing snow from the front loader’s right side. Essentially using it for cleaning as the loader leaves messy overflow piles on either side.
If I don’t like it then I will go with this pusher. I have a leveling use case for the blade so will keep it regardless.
Ha bummer on the melted snow! Or is it lol. That is a good sized driveway! I would like to get a rear blade!
What you describe as basically using it as a side wing is a great application! I bet that will work out just fine for you!
I put on my High Molecular plastic skid shoes on today and my 60” high molecular back drag blade just came in today from UPS. I ordered it on Amazon ….Tusk Subzero UHMW 60” replacement blade kit with hardware. About $59. Again, I thank you for putting me on a great path. Kevin
Awesome! Are you going to make a video of the back drag? I'd like to see that!
💥 Always fun playing in the snow!
*Keep on tractoring!* 👍
Thanks man! I love your channel! It was a great source for me when doing research towards buying mine! Keep up the great work and thanks for the comment
You prolly dont give a shit but does any of you know a method to get back into an instagram account?
I was dumb lost my password. I love any help you can give me
@Johan Israel instablaster =)
@Sean Vance thanks for your reply. I got to the site thru google and Im in the hacking process now.
Takes quite some time so I will reply here later with my results.
@Sean Vance it did the trick and I actually got access to my account again. Im so happy:D
Thanks so much you saved my ass !
Adds plastic to not scratch driveway, neighbor pulls up with snowmobile and drives carbides on driveway! It’s always something isn’t it? Lol
The kids are waiting for a snow bank to play on lol
My dad used to take is 4020 diesel and use the bucket to make a huge pile of snow then my and my friends would make tunnels through it 😀
Pretty cool ! Looks like it does a fine job ! Is that all concrete ?? Would love to have that workshop !!
Thank you! There is some gravel in between the house and the shop.
@@WichhartAcres what part of the country u guys in ??
Great video! What is the thickness of the UHMW poly you used for the runners?
I used 1/2". I found a 48x4 piece on amazon and then cut it in half with my table saw.
@@WichhartAcres Thanks, I’m going to buy some. I just got a Bx2380 and wasn’t sure if the 60” pusher would be too big, but your tractor seemed to have no trouble at all. Thanks again for the reply.
@@tomneedmorebeer5525 You have the same tractor as the BX23s, just without the sub-frame for the backhoe which is what the "S" means on the BX23S. Pretty awesome little tractors. I have the BX2680, love it, plenty of power not enough traction LOL.
What model land pride pusher is that? Worked great..
Its the spl0560 Thanks for watching!
I have the same tractor. How do you think this would perform pushing about 300 feet?
You'll run out of traction long before you run out of power. Have areas along the driveway where you can go left or right to push the snow off to the sides otherwise you'll end up with a large pile out front that'll eventually stop you in your tracks. I have the BX2680, love it, but like I said you run out of traction long before you run out of power.
I only have a 1880 bx but found a deal on a 6ft pusher do you think that would be to much for the tractor
Hey Harley! With enough weight in the back I bet it would handle it! If it doesn't work sell it for what you paid for it. They don't lose much value. Thank you for commenting and watching! I would it if you sub'd to the channel!
Where did your loader bucket go? You drove out of the garage with the bucket and drove.back into the picture with the pusher? lol
Lol left it outback! Thanks for watching and commenting!
Good move at 19:00.
Learned to do that the hard way!
8”? It’s not even ankle deep on the kids.
Thanks for watching!
How do you like the pusher compared to using the bucket?
Ive actually not tried the bucket yet for snow removal. I bought the snow pusher when I bought the tractor. Do you have experience with moving snow with a bucket?
@@WichhartAcres I use the bucket all the time. But I'm thinking it would be more efficient with the pusher.
I have the same set up and use the pull back allot. After about the first year I noticed that the factory cutting edge was wearing out. I took a piece of strap steel and bolted it to the pull back. It's set up so that when one side wears out I can flip it over. I take care of 25 driveways though.
@@coreysellers4529 Thanks for the comment man! I think the pullback kit is a must if you have the pusher! I need to get some driveways lined up like you! Thats a great idea for extra wear edge up top. I will keep that in mind. Have you had to replace your bottom edge yet?
Does that attachment require the 3rd function valve on the FEL? Thanks
No it just hooks up to the loader arms like the bucket does
@@WichhartAcres Thanks! Great video!
What size snow pusher us that?
It's a 60 incher
jesus , how long does it take u to plow your land . get a bigger plow at least
Lol yea