This videos is mainly showing what model WE Glocks are compatible with what Frame ex. would a g19 slide fit a g17 frame?. some of the results were different than what i assumed. Hope you enjoy!
To touch on this, after extensive research I’ve found a generation 4 Glock frame is thee best frame to own if you’re wanting to run multiple generation slides on one frame. Seems a gen4 frame allows Gen 5 slides and Gen 3 slides with an adaptor for the guide rod to fit flush in the tang of the Gen 4 due to a small spacing frame to slide on the Gen 3. So conclusion if you’re wanting to run multiple slides on one decked out frame it’s a Gen 4
Interesting, I wonder if a Glock 21 Slide would fit/function on a Glock 30 Frame ? I could see this being very useful with the increased sight radius of the Glock 21 Slide with the compact grip of the Glock 30 Frame while still being able to use Glock 21 magazines if wanted (with an adapter/spacer the Glock 30 could be almost be transformed into a Glock 21). Would this even be possible? I was also thinking about doing something like this with a Lonewolf Timberwolf Frame if this wouldn't work with factory Glock Slides and Frames. I would appreciate it if you could find this out for me and anyone else wanting to do something similar. Thanks
I have emg tti jhon wick style slide but it dificult.. Like it doesn't fit with guarder rear chasis when i install the slide without the blow back housing it fit... Any idea what should i do?
I hVe a question I bought the Glock 45 9mm and I want to buy the Glock 23 40cal I was wondering if the Glock 23 slide will fit on the Glock 45 frame the Glock 45 frame is pretty much the 19 X I have that also but I’m wanting the 40 caliber on the 17 grip
Where do you buy your parts and/or complete guns from, I’ve been looking into collecting Glocks and improving them but I can’t find the base pistols except from private sellers. And on a side note, where did you find the threaded outer barrel for your G19? I’ve been looking all over and can’t find any to suit what I want.
Max Cherepenin My G19 slide is chipping away where it locks. I can't seem to find any G19 slides anywhere nor do I want to fix this slide myself. Do you have any suggestions on finding a G19 glock slide in which case I don't have to buy a boneyard version.
Hey max, I recently bought a we g19 gen 4, I'm looking to buy some taller suppressor sights or even night sights since I have an extended inner barrel with a suppressor shroud to cover it, do you know what brands or what sights are compatible with the g19?
hmm i haven't really played around with sights on these. I would check out some accessories on airsoft global for these they will have some that are compatable with the g19.
Hey max when you say the glock17 semi won't function with a 18c full auto slide without the full auto frame, are you meaning the hammer assembly or the whole pistol frame??
Hey max, could you see if your g17 sights fit on the 19 slide or vice versa? Also wondering if the g17 barrel assembly will fit on the 19 frame and slide?
these are a bit harder to come by in terms of parts, the cheaper alternative would be to buy a new one. They might have TM slides but its alot of extra working getting we tech and TM parts to work fluent. The slides sometimes can be worth a new gun lol
@@MaxCherepenin I like Wuelf slides on Ebay, or try to find a good used one on Gunbroker.com You might have to wait to find a good used one at the right price.
This one i have not ordered yet. Its not all that expensive since its made in china not Taiwan so quality is a bit cheaper. But probably in the long run i will :)
Great video, rare to see so many glocks in a collection. You deserve more views for this video. Do you have a TM g26 and a KJW g27? I am trying to figure out if a g27 slide will fit on the tm g26. New guarder slides are $200, I rather buy a kjw g27 and throw the slide on my tm 26
Thank you sir! Yeah huge fan of these pistols and recently added to more to my collection about 2 months back and more to come with the Umarex glocks coming out soon. I do not have either of those unfortunately so i cant tell you much, these are more obscure when it comes to airsoft glocks as mainly every sticks with the g17/18c .
Can slides be replaced in the WE 19/17? I heard WE's do not accept TM slides. If I drop my PGC slide for my TM17 on a WE 17 it won't fit?... I am torn between a KJ Works G32 and a WE 19 Gen 4. I heard to stay away from WE because they are CRAP, but I heard they "are" improving" ........... I really want a 19.
They can be replaced but do not buy TM slides for the WE unless you are trying to create the Frankenstein glock lol meaning lots of cosmetic alterations. It was a pain to put a PGC slide made for TM on a we tech g17 i made it work but i have to do alot of sanding and adjustments to the parts so they work fluently and even after all that work im only partially satisfied. The upside is i turned it into a fully trademark glock . I have videos of it on my channel. Also WE is a cheap brand by they have upgrade parts galore, im not sure with KJW never really saw alot of parts for it.
I have a KWA G17 with lots of mags. I was wondering if the WE Glocks are compatable with KWA mags. This would save me from buying more magazines. Thanks and great videos!
Thank you for watching sir! This is a good question as i never owned a KSC/KWA glock. Those are much more rare to come by at least when i tried looking fro them a few years back. But unfortunately i do not have a proper answer to your question. Maybe in the future i will try to search for these and do some side by side comparisons :)
Max Cherepenin thank you for responding. I went and ordered a WE G17 GBB SV slide, GD barrel, Tan frame from Airport Global. I'll let you know the compadability of the parts when I get it. Thanks.
Are you talking about g19 slide on a g23 lower frame? If so, there maybe some issues with it firing because the g23 lower frame has a slightly different hammer build to engage the full auto function properly. I don't recall if i have tried this on my end but, I think its possible it might not work correctly when trying to fire.
Well not quite. The g17/18c will share the same size barrel. Any other variants like the 19,23,26 and so on are different sized. You can try to search barrels under the g17 category and see what they have.
More or less they are identical. But matching up parts can some times be a pain as they are not 100% compatible. You have to do extra work like sanding sometimes to fit parts together.
For the most past yes and no. The 18 and 17 have different slide internals because of the 18c selector switch.otherwise inner and out barreknwork fine and recoil spring guide rods work too. Were you switching bbu’s?
Thanks so much, i do appreciate this comment! Yeah trust me i know what you mean lol I try to be as informative as i can without trailing off randomly lol
I can consider doing a video in the future to maybe test this. At this time I'm not sure off the top of my head if this is possible. I assume that it might be. Just make sure that you are getting oem parts. WE for WE TM for TM KWA for KWA, know what i mean?
All I can say is I’m a slide and lower out now 😂 time to start finding a new one now -and that’s with just 2 seperate glock 17 slides 😅😂 DO NOT USE WE TECH with any of your other tm otherwise you’ll be put a toy
I was so confused until I realized it was airsoft
Same now I’m closing the video😂
Full auto g18 damn it it’s airsoft
Sammmmme
awwww shit. so the title was correct.
Yeaaaaaaa me toooo hahaha
To touch on this, after extensive research I’ve found a generation 4 Glock frame is thee best frame to own if you’re wanting to run multiple generation slides on one frame. Seems a gen4 frame allows Gen 5 slides and Gen 3 slides with an adaptor for the guide rod to fit flush in the tang of the Gen 4 due to a small spacing frame to slide on the Gen 3. So conclusion if you’re wanting to run multiple slides on one decked out frame it’s a Gen 4
Interesting, I wonder if a Glock 21 Slide would fit/function on a Glock 30 Frame ? I could see this being very useful with the increased sight radius of the Glock 21 Slide with the compact grip of the Glock 30 Frame while still being able to use Glock 21 magazines if wanted (with an adapter/spacer the Glock 30 could be almost be transformed into a Glock 21). Would this even be possible? I was also thinking about doing something like this with a Lonewolf Timberwolf Frame if this wouldn't work with factory Glock Slides and Frames. I would appreciate it if you could find this out for me and anyone else wanting to do something similar. Thanks
I just wanna know can I swap my Glock 22 slide to a gen 3 frame and which one?
I have emg tti jhon wick style slide but it dificult.. Like it doesn't fit with guarder rear chasis when i install the slide without the blow back housing it fit... Any idea what should i do?
Are the g17 and g19 loading nozzles inter changeable?, Can I put a WE EU17 loading nozzle in a WE EU19 slide? Both gen 4
Thanks
I hVe a question I bought the Glock 45 9mm and I want to buy the Glock 23 40cal I was wondering if the Glock 23 slide will fit on the Glock 45 frame the Glock 45 frame is pretty much the 19 X I have that also but I’m wanting the 40 caliber on the 17 grip
So a SRU WE 18C slide will fit a WE G23C frame?
Can I do a 17 frame and 19 slide will it function you didn’t shoot it or anything when you did that combo
so why not try all frame and slide combos? will the glock 19 gen 5 frame work with the glock 17gen 5 slide work??
Where do you buy your parts and/or complete guns from, I’ve been looking into collecting Glocks and improving them but I can’t find the base pistols except from private sellers. And on a side note, where did you find the threaded outer barrel for your G19? I’ve been looking all over and can’t find any to suit what I want.
www.bearcreekarsenal.com/replacement-barrels-for-glock-pistols?stock=1
Quick question, would a g26 be ok if it's full auto to put on a 27? If the 27 isn't fully auto ? Maybe a dumb question but interesting 🤔
Does the WE g18c work with TM slides?
Any we glock outer barrel compatible for we glock 26 full auto???
Max Cherepenin My G19 slide is chipping away where it locks. I can't seem to find any G19 slides anywhere nor do I want to fix this slide myself. Do you have any suggestions on finding a G19 glock slide in which case I don't have to buy a boneyard version.
I would maybe check out the airsoftglobal.com website since they sell lots of parts there.
will a glock 19 slide fit on the 23 frame?
Hey max, I recently bought a we g19 gen 4, I'm looking to buy some taller suppressor sights or even night sights since I have an extended inner barrel with a suppressor shroud to cover it, do you know what brands or what sights are compatible with the g19?
hmm i haven't really played around with sights on these. I would check out some accessories on airsoft global for these they will have some that are compatable with the g19.
Dude where did you get the 18c,that’s full auto and who did the conversion on the 25 with the selector switch
Hey max when you say the glock17 semi won't function with a 18c full auto slide without the full auto frame, are you meaning the hammer assembly or the whole pistol frame??
The hammer housing may have issues and jam. I would not recommend it.
Will a we G23 slide fit a 18 frame they both are auto ???
Hey do you happen to know if a we tech g17 gen 4 lower frame can accept a kjw g17 slide? Probably a no brainier but I want to make sure
Well there may be a difference in slide thickness and the kj might not slide on the we lower as it's a bit wider.
Hey max, could you see if your g17 sights fit on the 19 slide or vice versa? Also wondering if the g17 barrel assembly will fit on the 19 frame and slide?
Can I put a Glock 19 slide on a Glock 17 gen 3 frame ?
What about in and outer barrel compatibility
How about g18 slide into g35 frame?
I was wondering if you have any advice on finding a replacement slide for the g26 autos. I can't see any solution short of buying a new gun.
these are a bit harder to come by in terms of parts, the cheaper alternative would be to buy a new one. They might have TM slides but its alot of extra working getting we tech and TM parts to work fluent. The slides sometimes can be worth a new gun lol
+Max Cherepenin I was afraid of that, thanks
you're very welcome.
@@MaxCherepenin I like Wuelf slides on Ebay, or try to find a good used one on Gunbroker.com You might have to wait to find a good used one at the right price.
Will g48 barrel work in g 43x?
You forget to show the most waited slide change, the G17 on a G19 frame...
Its called Glock 19 Long
@@aleccross3535 19x
A G19X is a G19 slide on a G17 frame. If you don't know what you're talking about then don't talk.
Ohhh why didn’t you say these were airsoft in the beginning?
Had me super confused until I saw you put the mag in
hello sir! What about the sights? Will G17 sights fit G19 slides? Thanks!
for WE I think so since the slide should be the same thick ness
Can you mount g19 internal frame parts of a we g19 Gen4 into a we g17 frame Gen4?
Hmm good question, I have not tried this. I feel as though the G19 internal frame is smaller.
Hey have you ever ordered a BELL g17 ??? If so could you give me some first hand experiences
This one i have not ordered yet. Its not all that expensive since its made in china not Taiwan so quality is a bit cheaper. But probably in the long run i will :)
Good video for anyone who has the Models you show. I have another coming soon, G-18c aeg, 4 AAA batteries....excited , thx for the vid.
glad you enjoyed the video! and that sounds awesome! im sure you will definitely enjoy that pistol!
But will the G19 slide fit on the G26 frame and function?
Yes it will however it must be a gen4 19 slide. I actually did one. I covered the gap with a G19 gen 2 rail adapter
Hello! Will the aps acp601 glock slide fit to the tm g17?
Hi there, i have not tried this, but i feel it might not .
Great video, rare to see so many glocks in a collection. You deserve more views for this video.
Do you have a TM g26 and a KJW g27? I am trying to figure out if a g27 slide will fit on the tm g26. New guarder slides are $200, I rather buy a kjw g27 and throw the slide on my tm 26
Thank you sir! Yeah huge fan of these pistols and recently added to more to my collection about 2 months back and more to come with the Umarex glocks coming out soon. I do not have either of those unfortunately so i cant tell you much, these are more obscure when it comes to airsoft glocks as mainly every sticks with the g17/18c .
Picked up a KJ Works 27 the slide is a drop in fit for my TM g26.
Can slides be replaced in the WE 19/17? I heard WE's do not accept TM slides. If I drop my PGC slide for my TM17 on a WE 17 it won't fit?... I am torn between a KJ Works G32 and a WE 19 Gen 4. I heard to stay away from WE because they are CRAP, but I heard they "are" improving" ........... I really want a 19.
They can be replaced but do not buy TM slides for the WE unless you are trying to create the Frankenstein glock lol meaning lots of cosmetic alterations. It was a pain to put a PGC slide made for TM on a we tech g17 i made it work but i have to do alot of sanding and adjustments to the parts so they work fluently and even after all that work im only partially satisfied. The upside is i turned it into a fully trademark glock . I have videos of it on my channel. Also WE is a cheap brand by they have upgrade parts galore, im not sure with KJW never really saw alot of parts for it.
Max Cherepenin can I use a guarder g18 frame for a tokyo marui g18 on a we tech g18c gen 4?
I am pretty sure the frames don't matter, it's the slides. I have a we18c in gen 4, coming soon.
this is totally rediculous love the vid
haha thanks man! and i took off all the orange tips.
What state are you in
I have a KWA G17 with lots of mags. I was wondering if the WE Glocks are compatable with KWA mags. This would save me from buying more magazines. Thanks and great videos!
Thank you for watching sir! This is a good question as i never owned a KSC/KWA glock. Those are much more rare to come by at least when i tried looking fro them a few years back. But unfortunately i do not have a proper answer to your question. Maybe in the future i will try to search for these and do some side by side comparisons :)
Max Cherepenin thank you for responding. I went and ordered a WE G17 GBB SV slide, GD barrel, Tan frame from Airport Global. I'll let you know the compadability of the parts when I get it. Thanks.
i dont know if u said it on the video iam also kind of new on airsoft guns can u fit a g19 slide on a g23 gen 3 semi and full auto
Are you talking about g19 slide on a g23 lower frame? If so, there maybe some issues with it firing because the g23 lower frame has a slightly different hammer build to engage the full auto function properly. I don't recall if i have tried this on my end but, I think its possible it might not work correctly when trying to fire.
@@MaxCherepenin do you know if the g19 can be modded to have full auto?
Can you put the g18 hammer set on a g17 frame
I feel that you should be able to since its the same frame essentially. I've only done this with g17's and g17 lower frames.
What website did u get those glocks from? Please tell me
airsoftglobal.com
Will a we g18c slide fit on a 35 frame?
I feel as though it should since the frames are the same and both full auto assembled as far as the hammer set goes
HI Everyone! Come support me on Patreon! www.patreon.com/maxcherepenin
Have you ever tried to put a real upper on a BB gun glock frame?
No, it will not work and I would advise against it lol
do all the we tech glocks use the same outer barrel i cant seem to find an upgrade for my 18c
Well not quite. The g17/18c will share the same size barrel. Any other variants like the 19,23,26 and so on are different sized. You can try to search barrels under the g17 category and see what they have.
Max Cherepenin ill see what i can find
Max Cherepenin oh people have also said that Tm glocks are identical to we glock would a tm outer barrel for a 17 or 18 work
More or less they are identical. But matching up parts can some times be a pain as they are not 100% compatible. You have to do extra work like sanding sometimes to fit parts together.
will a we g17 slide fit a aps acp 601 frame?
hmm not sure , unfortunately i cant answer that because i never owned that pistol.
Was the 23 converted, cause I didn't think the 23 came that way
No conversions, this is how WE Tech produced this variant of glock. (Airsoft guns btw)
will any glock slide work on a glock 22 full frame?
Im not familiar with a glock 22 in the airsoft world but... I would try to match that model with other glock 22 parts.
friend, a glock 19 so wetech works a umarex slide
Here's a question for anyone that would know. Would the internals from a G18c fit inside a G17 frame?
For the most past yes and no. The 18 and 17 have different slide internals because of the 18c selector switch.otherwise inner and out barreknwork fine and recoil spring guide rods work too. Were you switching bbu’s?
Part*
Really should open with "THIS IS AIRSOFT". Maybe in the title
But will a 17 slide fit on an 18C frame?
william pete yes but same issue where the trigger will not engage the hammer because of the auto sear
Where do I get full auto frames?
Its not so much the frames as you need the actual full auto hammer assembly and blowback unit.
How did u make your Glocks full auto?
Some of these come like this from the factory. the g18, g26, g23, g35, g33 advanced are all oem full auto/semi auto. All by WE TEch.
So I can put a 17 slide on an 18c frame?
In theory it may work by may mis fire or not fire at all.
@@MaxCherepenin damn. Thank you for the information
You technically invented the GLOCK 19X! GLOCK must have seen your vid. Royalties surly? Lol ;)
haha that would make sense why all of a sudden i kept seeing their new pistol recently lol
Lol, Just wanna say, love you're vids, all the way from the U.K! Very informative with actual useful information unlike "most" airsoft videos.
Thanks so much, i do appreciate this comment! Yeah trust me i know what you mean lol I try to be as informative as i can without trailing off randomly lol
Nah, your cool dude! Their is a lot on CZcams that do TRRRAAAIIILLL OOOFFF! ;) Lol
My glock slide keeps locking back while shooting
when you switch the slides?
can a we g17 gen 4 slide fit a we g17 gen 3 lower?
Yep it should.
Max Cherepenin thanks
I want the g18 upper :/
Nice!
Can G17 sights fit onto a G18c slide?
They should be able to being that they are the same slide thickness.
Max Cherepenin could you check? Some places are saying I can some and some are saying not.
I can consider doing a video in the future to maybe test this. At this time I'm not sure off the top of my head if this is possible. I assume that it might be. Just make sure that you are getting oem parts. WE for WE TM for TM KWA for KWA, know what i mean?
Max Cherepenin yeah i video on this would be great. Trying to find some good sights for my g18c but all the good affordable ones are for the g17.
Can I have all of tham
I think you answered it after I watched vid
Muito legal gostei
I just want to have a good way to practice dry firing with my MOS slide with an RMR.
I thought that a glock 17 could be automatic once you put any automatic glock slide XD thanks for the vid mate
All I can say is I’m a slide and lower out now 😂 time to start finding a new one now
-and that’s with just 2 seperate glock 17 slides 😅😂 DO NOT USE WE TECH with any of your other tm otherwise you’ll be put a toy
Hammer 🤔
So many real steel shooters getting hella confused in these comments
Ahhh, airsoft. Got it.
Why do they put airsoft with firearms vids? Keep your title right buddy! Don’t do sneaky stuff for more vid view counts.
Took me 4 minutes to realize this I airsoft smh 🤦lmao
Toy guns😂
Dude wtf put that this is airsoft in your description
PUT AIRSOFT IN THE TITLE!! LOL
Them toys get some real glocks
Please put airsoft in your video title, love for airsoft, but important to distinguish.
Wtf is this? It would help if you put this was for toy guns in your title
Wtf these not no glocks these are toys so misleading
Why dont you put a disclaimer? NOT A REAL GUN!!!!!!
GIVE ME BACK MY 37 SECONDS
Why don't you read? Moron.
"WE" is an airsoft gun manufacturer.
Besides what real steel glocks have you see with white trademarks?
right. fuckin airsoft pussies everywhere
Next time mention your video is for airsoft so we don't waste our time! Thumbs Down!
Airsoft crap!!!
NOT REAL GUNS. LAME.
these BB guns are getting crazy..