Before this video I did extensive work on this car, including putting in a different camshaft and replacing the tie rod ends. the steering wheel wasn't straight. THIS VIDEO WAS RECORDED right after this work and the car had an alignment right after. I have a lot of suspension work done to it and I am aware the car's steering is not straight in this video. I am in the process of getting all the gear so i can do my OWN alignments and not rely on a shop which is hard to find thay wont fuck the car up.Any further comments about how I need an alignment will be deleted as this answers ALL of them! Thanks for watching!
" not rely on a shop which is hard to find that wont fuck the car up" - wise decision, I have the same problem. We have to conclude that people are trying to make living in any sorts of ways, being "mechanics" included. So many amateurs out there all around the planet.
Nice ride, do yourself a favor and make your next move a set of heads. Those engines are known to drop valves, and if that happens, it's total carnage.
@@adamscott9725 "next move" thanks Sherlock. nothing about this car is stock, including the heads, it makes over 600whp with various mods including reworked / ported heads.
@@veganjoy engine mods: -RPM B 3 cam -Ai 280 CC cylinder heads milled and -ported dual Valve springs titanium valves -Btr pushrods -reflowed LS7 injectors -Mamo ported MSD Airforce intake manifold -Nick Williams 102mm throttle body -Vararam snake charmer Air intake (don't like this) -C5.R timing chain -ATI 10percent underdrive Crank pulley -Monster Clutch LT-S triple disc clutch and aluminum flywheelI Exhaust: -American Racing 2" Headers Catless X pipe -custom made straight piped exhaust 3" rest of way, no mufflers 4 tips (will be changing to 2 tips with 2 tip diffuser hopefully in future.) (Since this video) Suspension/ brakes: - Van Steel front 35MM Adjustable Sway Bar and Rear 25.4MM Adjustable Sway Bar -JRi Double Adjustable Coilover Shocks not cheap -SKF Racing Bearings wheel bearings -Van Steel/Hard Bar Delrin Control arm Bushing Kit -AMT motor sport Camber Plate Alignment kit -AMT Motorsports Vulcan lowered Motor mounts, (if I can recommend one suspension it's these) -AMT trans vulcan trans Mounts -Stop tech stainless lines and pads (stock c6 z06 calipers) -DBA 4000 SERIES T3 ROTORs -Motul brake fluid Trans /diff -trans RPM Transmissions stage 5 T56 trans -Media Blast Transmission Case Solid Synchronizer Keys Bronze Fork Pads on All Gears 1-6 Including Reverse Bronze Shifter Bushing When Applicable Steel 3-4 Shifter Fork RPM Modified 1-2 Shifter Fork Hand Fit Sliders and Hubs New Compressed Carbon Blocking Rings Micropolish by Performance Metal Cryogenic Processing by Performance Metal. -RPM stage 3 diff with 3.90 gears Seal & Gasket Kit 300M Left Stub Shaft 300M 2-Piece Right Stub Shaft Upgraded Carbon Clutch Packs HD Preload Springs Performance Metal Micropolished -MGW race Shifter. Thanks for watching!
Yes definitely one of the best sounding NA ENGINES period. I also like the sound of liter bikes diesel 15Liter truck engines so I'm definitely not biased lol😆
it sounds really good for a „new“ V8, no worries, but the BEST sounding V8s are the ones in the late 60s. 440+ CUI without all that „environmental“ crap. 😉👍
Could you imagine a hiker a mile away in the desert just absolutely loving life hearing the roar off the hillsides and echo through the valley? Its the small things in life!
One of the best sounds. I love to walk my dog late at night and listen to spirited drivers enjoying whatever they have. Hellcats corvettes and mustangs have a distinct sound.
This honestly is on my bucket list before I leave this earth. Just a big, clear, smooth, open road, beautiful scenery, and a loud fast manual transmission v8 to listen to. You are living the dream man💪
@Huncho661 yeah, too bad all the car's in Cali are de-tuned, emission system-loaded, overpriced pieces of junk and they can't even be modified without fear of getting fined or jailed.
i'm not that much a fan of american cars in general, but that is probably one of the best sounding engines i've ever heard in my entire life 5 months later and i now have a chevy impala ss with the LS4 lol
I'm the opposite, I'm from the UK , our top 5 cars on the road are : BMW, Audi, Mercedes, Vauxhall, Ford(Ford Europe) Our fuel is £1.45/Litre (roughly $7.50 a gallon) so American manufacturers never bothered competing (except since 2020 we've had the Mustang). I'd LOVE a C5/6 Z06. Hell I'd love a 92 Cobra or a late 80s IROC-Z. But although they used to be cheap (I found a 92 Fox body Cobra in black for £3k ($4k) I couldn't get hold of the seller. They're rare as hens teeth, normally sold by servicemen going home. I looked at an Iroc 305 manual bit it was rough. Really rough, it was also ENORMOUS!! I had no idea how huge they are.
@@realMaverickBuckley Vauxhall, who used to be secretly yankee and imported Holden's and OPC's sport models and now is fun as hell rebranding rebranded PSA (or Stellantis?) models with the famous PureMerde and BeurkHDi engines…
@@prodyung829 this was actually recorded day before his death which is why I get defensive when the mfers talk shit, appreciate support and glad you enjoyed video!
@@Airsoftbros888damn dude sorry to hear about your brother, this video is badass and I’m glad you were able to capture it for the world to see and to have the memory forever
I'm a Mustang guy myself, but nothing sounds like an LS7. And the power is AMAZING. I drove a C6 Z06 some time back and was blown away by the intense power all the way through the RPMs, though she gets really happy above about 3500RPM. Monster engine GM came up with, it's a shame they don't make them like this anymore.
I’m an everything guy, however I agree the C6Z06 is really something special. Awesome handing, lightweight, plenty of power even stock. There isn’t much comparable to this car now with things being so heavy and everything “supercharged” or small displacement stuff being turbo ed.
@@MyMomsADadNow 90k miles on mine no issues. There are also heads available that fix the problem. Do you truly believe the engine in this video jas the bone stock factory heads?
@@MyMomsADadNow I think you're some butthurt cheap ass with a dinky 5.3 or ls1 that can't make 600wheel NA lol. Also I don't know if you have any experience actually building engines but doing maintenance and checking your top end for can make your shit last longer
@@metadata4255 and I'm guessing you own none! Flat plane cranks are a high matenice joke and literlly shake your emgine and everything around it apart. That's why seriois road racers literally convert their gt350s to cross plane. This is also coming from someone (me) who has a $20k NA 5.2L CROSS plane coyote that revs to 9,000RPM and will stomp the shit out of any of those engines including reliability along with this ls7. Now GTFO euro boy
I like it /\ don’t be so sure, not in every instance - especially if we’re talking modified vs modified Corvette has long been my favorite car since I was a little boy, LS motors are like nothing else…
I've had a pleasure of seeing one last summer,i was walking my dog an this amazing thing just went full throttle down my street,it was fuckin glorious. There's plenty german v8,some ferraris Maseratis and stuff like that where i live but american cars are super rare. Europen cars sound good, but I've never heard anything as amazing as a Corvette in my life.
I've only been a "car guy" for a year now, learned a LOT of shit over time and fell in love with Japanese cars (specifically Subaru's), but lately, I found a love for American muscle. I've always hated muscle cars. I used to hate Mustangs, now I like em. Corvettes? Used to absolutely fucking hate them but holy shit has that changed. Sounds amazing bro, glad you're enjoying such a marvelous machine. 🙌
Funny cause I hated corvette when I was a kid. The older I've gotten the appreciation I have for ALL cars. Subaru s for instance would fun to go off road (road dirt) or rally type driving on dirt or snow! I say don't have a bias towards one or another enjoy them all
just some dudes being dudes enjoying what dudes like. absolutely love the rhetor between these two. amazing how cars bring people together, im sure they both speak of this experience to this day.
@@Airsoftbros888 where are you located? Those roads look perfect for that car In Connecticut the backroads are so windy that basically anything larger/faster than an s2000 or maybe a c5 corvette is a waste.
I'm convinced the people at GM don't love cars because any car lover would keep this sound and feel for all time no car person would trade this for a flat plain crank long live the cross
Wow. I’m sure this video does not do justice with how fast that felt. Doing over 100 in a corner like that is crazy!!! Such a great video. Rest in peace to your brother😢🙏
I love watching videos like this and dreaming of all the amazing cars there are in this world... then go back to being stuck in traffic in my Ford Focus.
I won’t say exactly unless you’re close, but generally speaking in WA state. I agree this road is actually “safe” to drive like this because of all the things you mentioned and also almost never any traffic. I’m all about safety but when you get on a road like this it’s hard not to haul ass lol
All hail the good ol' pushrod LS motor with that cross-plane crankshaft. Anything LS is legendary. Best V8 engine ever. No dual overhead cams, no flat-plane European junk, no turbos. Either this beautiful NA V8 or slap a supercharger on top without compromising torque and sound.
I love V8 Corvette's since first time when i saw at the Blue C6 ZR1 road screaming with ls9 ( i was 10 years old then,i dream the car so much that days ). God. İ'm in love ❤
I like alot of different stuff, and am mainly a ford guy, but the ls7 z06 is hands down the most raw drivers car thats ever been produced in terms of sound and chassis lay out. Its definitely on my list of "wants"
@@Airsoftbros888 I didnt do anything to my steering wheel but I still go that airbag light on, do you think if I changed the clockspring it will fix it?
@@mesharial-malki5721 in my opinion clock springs are cheap and with basic tools you could do it yourself in a hour to hour and a half. yes I'd try that, I've replaced parts much expensive trying to diagnose a problem. A "dealer or shop" would do the same thing, expect they wouldn't bother trying to save any money
@@mesharial-malki5721 a "clock spring" is just a device that let's you spin the wheel and still have your horn air bag etc. Mine made a clicking noise when turning the wheel like a canceling a turn signal. Yours could be a fuse problem too
"Don't die over it" lol. I'm the same way. I hit 275 KPH on the way to work in my mildly tune BMW 535Xi M-Sport. The road design, condition, lack of cross roads and traffic allowed my to open it up a couple times with minimal Risk. It does the Quarter in 12.7 and should hit 285 KPH. It doesn't sound or handle like this though.
I love these cars so much. And I love when people drive them the way they were intended. I drive a mustang so it’s a wildly different experience, I would love to own a vette. I’m getting a Porsche soon though so I think that will cure my need for corners
It's a very realistic dream car I'll tell you that, I got mine for $31k with 21,000miles. They have gone up since but cost the same as a new camary lol
I’m not a Chevy guy and dislike corvettes but dang this thing sounds good! I think any car guy can appreciate a wide open road, a great sounding car and a manual transmission.
There's no reason to hate a brand, I used to he like that when i was in middle school but when I actually started buying cars I realized it's more fun when you're willing to enjoy ALL brands from ALL countries. I think a lot of it comes from people having to have what their "daddy" drove. Lol thanks for watching
@@michaeldenson1929 Road is private rd 😉 engine mods: -RPM B 3 cam -Ai 280 CC cylinder heads milled and -ported dual Valve springs titanium valves -Btr pushrods -reflowed LS7 injectors -Mamo ported MSD Airforce intake manifold -Nick Williams 102mm throttle body -Vararam snake charmer Air intake (don't like this) -C5.R timing chain -ATI 10percent underdrive Crank pulley -Monster Clutch LT-S triple disc clutch and aluminum flywheelI Exhaust: -American Racing 2" Headers Catless X pipe -custom made straight piped exhaust 3" rest of way, no mufflers 4 tips (will be changing to 2 tips with 2 tip diffuser hopefully in future.) (Since this video) Suspension/ brakes: - Van Steel front 35MM Adjustable Sway Bar and Rear 25.4MM Adjustable Sway Bar -JRi Double Adjustable Coilover Shocks not cheap -SKF Racing Bearings wheel bearings -Van Steel/Hard Bar Delrin Control arm Bushing Kit -AMT motor sport Camber Plate Alignment kit -AMT Motorsports Vulcan lowered Motor mounts, (if I can recommend one suspension it's these) -AMT trans vulcan trans Mounts -Stop tech stainless lines and pads (stock c6 z06 calipers) -DBA 4000 SERIES T3 ROTORs -Motul brake fluid Trans /diff -trans RPM Transmissions stage 5 T56 trans -Media Blast Transmission Case Solid Synchronizer Keys Bronze Fork Pads on All Gears 1-6 Including Reverse Bronze Shifter Bushing When Applicable Steel 3-4 Shifter Fork RPM Modified 1-2 Shifter Fork Hand Fit Sliders and Hubs New Compressed Carbon Blocking Rings Micropolish by Performance Metal Cryogenic Processing by Performance Metal. -RPM stage 3 diff with 3.90 gears Seal & Gasket Kit 300M Left Stub Shaft 300M 2-Piece Right Stub Shaft Upgraded Carbon Clutch Packs HD Preload Springs Performance Metal Micropolished -MGW race Shifter. Thanks for watching
@@Airsoftbros888 Yeah...mine is still pretty much stock except for the headers, muffler delete and Throttle Controller....but it sounds exactly like your LS7.... honestly it's hard to distinguish between the LS3, LT1 LS7 engines with exhaust mods...I really can't tell the difference.
Before this video I did extensive work on this car, including putting in a different camshaft and replacing the tie rod ends. the steering wheel wasn't straight. THIS VIDEO WAS RECORDED right after this work and the car had an alignment right after. I have a lot of suspension work done to it and I am aware the car's steering is not straight in this video. I am in the process of getting all the gear so i can do my OWN alignments and not rely on a shop which is hard to find thay wont fuck the car up.Any further comments about how I need an alignment will be deleted as this answers ALL of them! Thanks for watching!
" not rely on a shop which is hard to find that wont fuck the car up" - wise decision, I have the same problem. We have to conclude that people are trying to make living in any sorts of ways, being "mechanics" included. So many amateurs out there all around the planet.
Nice ride, do yourself a favor and make your next move a set of heads. Those engines are known to drop valves, and if that happens, it's total carnage.
@@adamscott9725 "next move" thanks Sherlock. nothing about this car is stock, including the heads, it makes over 600whp with various mods including reworked / ported heads.
details on the build, or at least the exhaust setup? i want mine to sound like this lol
@@veganjoy engine mods:
-RPM B 3 cam
-Ai 280 CC cylinder heads milled and -ported dual Valve springs titanium valves
-Btr pushrods
-reflowed LS7 injectors
-Mamo ported MSD Airforce intake manifold
-Nick Williams 102mm throttle body
-Vararam snake charmer Air intake (don't like this)
-C5.R timing chain
-ATI 10percent underdrive Crank pulley
-Monster Clutch LT-S triple disc clutch and aluminum flywheelI
Exhaust:
-American Racing 2" Headers Catless X pipe
-custom made straight piped exhaust 3" rest of way, no mufflers 4 tips (will be changing to 2 tips with 2 tip diffuser hopefully in future.)
(Since this video)
Suspension/ brakes:
- Van Steel front 35MM Adjustable Sway Bar and Rear 25.4MM Adjustable Sway Bar
-JRi Double Adjustable Coilover Shocks not cheap
-SKF Racing Bearings wheel bearings
-Van Steel/Hard Bar Delrin Control arm Bushing Kit
-AMT motor sport Camber Plate Alignment kit
-AMT Motorsports Vulcan lowered Motor mounts, (if I can recommend one suspension it's these)
-AMT trans vulcan trans Mounts
-Stop tech stainless lines and pads (stock c6 z06 calipers)
-DBA 4000 SERIES T3 ROTORs
-Motul brake fluid
Trans /diff
-trans RPM Transmissions stage 5 T56 trans
-Media Blast Transmission Case
Solid Synchronizer Keys
Bronze Fork Pads on All Gears 1-6 Including Reverse
Bronze Shifter Bushing When Applicable
Steel 3-4 Shifter Fork
RPM Modified 1-2 Shifter Fork
Hand Fit Sliders and Hubs
New Compressed Carbon Blocking Rings
Micropolish by Performance Metal
Cryogenic Processing by Performance Metal.
-RPM stage 3 diff with 3.90 gears
Seal & Gasket Kit
300M Left Stub Shaft
300M 2-Piece Right Stub Shaft
Upgraded Carbon Clutch Packs
HD Preload Springs
Performance Metal Micropolished
-MGW race Shifter. Thanks for watching!
Probably the best sounding naturally aspirated v8 ever in production. This video is legendary
Yes definitely one of the best sounding NA ENGINES period. I also like the sound of liter bikes diesel 15Liter truck engines so I'm definitely not biased lol😆
I'm a Corvette guy, but have you ever heard a 458?
@@snvffxxx sounds gay
@@Airsoftbros888 my dirt bike doesnt run rn but my quad does sound better
it sounds really good for a „new“ V8, no worries, but the BEST sounding V8s are the ones in the late 60s. 440+ CUI without all that „environmental“ crap. 😉👍
Could you imagine a hiker a mile away in the desert just absolutely loving life hearing the roar off the hillsides and echo through the valley? Its the small things in life!
I would love to hear that and not just from this car cause it's mine but any good sounding engine!
One of the best sounds. I love to walk my dog late at night and listen to spirited drivers enjoying whatever they have. Hellcats corvettes and mustangs have a distinct sound.
This honestly is on my bucket list before I leave this earth. Just a big, clear, smooth, open road, beautiful scenery, and a loud fast manual transmission v8 to listen to. You are living the dream man💪
I appreciate the comment and u watching. Hopefully you get to go on that "drive" soon.
You got to come to cali there’s a lot of roads like this
You can rent a car fairly priced.
@@Hincho23481 there's lots of people and cops in Cali so wrong lol, notice how I did not meet a single car in the video...
@Huncho661 yeah, too bad all the car's in Cali are de-tuned, emission system-loaded, overpriced pieces of junk and they can't even be modified without fear of getting fined or jailed.
I have to give this guy mad props for testing out his car somewhere secluded where nobody is around he's doing the car hobby correctly lol
By far one of the best videos of a N/A C6 Z06 actually driving them how they’re supposed to be! Nice video 💪🏾
Yeah brother thanks for watching! they ain't meant for straighline , although they do pretty damn well at that too
@@Airsoftbros888 yes sir 💯💪🏾
Copilot is crapping his pants. Amazing sound
Car has jri coilovers honestly corners too hard for stock seats that were in it even on street
Him crapping his pants sounds good to you??
@@ellisjackson3355 pbbbbbbb
@@barnsnoble7066 lol the exhaust sound competing with the sound of the passenger ripping ass
i'm not that much a fan of american cars in general, but that is probably one of the best sounding engines i've ever heard in my entire life
5 months later and i now have a chevy impala ss with the LS4 lol
I tend to lean towards American cars but I love all of em! Wish I had a few more imports !
ford gt40 in my opinion the best sounding car
Double p’s for me. Pontiac and Plymouth.
I'm the opposite, I'm from the UK , our top 5 cars on the road are : BMW, Audi, Mercedes, Vauxhall, Ford(Ford Europe)
Our fuel is £1.45/Litre (roughly $7.50 a gallon) so American manufacturers never bothered competing (except since 2020 we've had the Mustang).
I'd LOVE a C5/6 Z06.
Hell I'd love a 92 Cobra or a late 80s IROC-Z. But although they used to be cheap (I found a 92 Fox body Cobra in black for £3k ($4k) I couldn't get hold of the seller. They're rare as hens teeth, normally sold by servicemen going home.
I looked at an Iroc 305 manual bit it was rough. Really rough, it was also ENORMOUS!! I had no idea how huge they are.
@@realMaverickBuckley Vauxhall, who used to be secretly yankee and imported Holden's and OPC's sport models and now is fun as hell rebranding rebranded PSA (or Stellantis?) models with the famous PureMerde and BeurkHDi engines…
Such an amazing video. The pure enjoyment you hear of these two driving this car the way it was intended to be driven
This was actually my brother driving who passed away and sincerely your comment means a lot to me!
@@Airsoftbros888 wow bro sorry for your loss. I'm glad you guys enjoyed this American beast together🔥🔥🔥🔥
@@prodyung829 this was actually recorded day before his death which is why I get defensive when the mfers talk shit, appreciate support and glad you enjoyed video!
@@Airsoftbros888damn dude sorry to hear about your brother, this video is badass and I’m glad you were able to capture it for the world to see and to have the memory forever
Dream car right there. Absolutely love the LS7 Z06. Pinnacle of fury in a box. Great video bud, post more like this please.
I will be with a "first person view".
I appreciate the comment and you watching.
I'm a Mustang guy myself, but nothing sounds like an LS7. And the power is AMAZING. I drove a C6 Z06 some time back and was blown away by the intense power all the way through the RPMs, though she gets really happy above about 3500RPM. Monster engine GM came up with, it's a shame they don't make them like this anymore.
I’m an everything guy, however I agree the C6Z06 is really something special. Awesome handing, lightweight, plenty of power even stock. There isn’t much comparable to this car now with things being so heavy and everything “supercharged” or small displacement stuff being turbo ed.
that is why the ls7 is my favorite engine of all time!! never heard a better one ur exhaust setup is so perfect
Appreciate you watching LS7s are definitely awesome, no other LS sounds quite like it!
@@Airsoftbros888 especially when they drop a valve. Lol
@@MyMomsADadNow hahaha funny ecks dee
@@MyMomsADadNow 90k miles on mine no issues. There are also heads available that fix the problem. Do you truly believe the engine in this video jas the bone stock factory heads?
@@MyMomsADadNow I think you're some butthurt cheap ass with a dinky 5.3 or ls1 that can't make 600wheel NA lol. Also I don't know if you have any experience actually building engines but doing maintenance and checking your top end for can make your shit last longer
I could listen to that all day. Something about horsepower and torque that gets me going!!!
Ty, more videos of this and a 600HP coyote swapped foxbody that revs to 9,000RPM on the way 👍
@@Airsoftbros888 Whats the exhaust setup? Absolutely mental sound, love the video!!
@@RattlesnakeRCandHobbies 2" American Racing Headers catless x pipe custom made straight pipe by me 3 inch pipes
Greatest sounding V8 ever built
Yes definitely is, much better sounding than other LS's
@@metadata4255 all weak!!
@@metadata4255 and I'm guessing you own none! Flat plane cranks are a high matenice joke and literlly shake your emgine and everything around it apart. That's why seriois road racers literally convert their gt350s to cross plane. This is also coming from someone (me) who has a $20k NA 5.2L CROSS plane coyote that revs to 9,000RPM and will stomp the shit out of any of those engines including reliability along with this ls7. Now GTFO euro boy
I’d say the 05-06 Ford GT is my personal favorite, but this is a close second.
@@berserker406 yeah sound is all opinion, some people think a Harley Davidson is the best sound, most don't lol
America has a Corvette, Germany has an M3,Japan has typeR. What a peaceful world.
Corvette takes all those cars out no 🧢
@@dover1966 of course it does 😅💪
I like it
/\ don’t be so sure, not in every instance - especially if we’re talking modified vs modified
Corvette has long been my favorite car since I was a little boy, LS motors are like nothing else…
Germany's Corvette is more the 911
@@dover1966 Don't get me wrong, I love the Corvette, however an M3 is going to run circles around it
Love LS came from a big turbo 4 cylinder to a heads cam Ls3 and the sound is something I’ll never get tired of
This is one of the best intenet feeling c6 videos ever
Appreciate you watching and the comment
Incredible sound. This is one of the GOAT engine sounds. Its up there with the Ferrari 355 and Porsche GT3, but more violent.
the sound THE SOUND. i use to die for induction sound, this has something of another level
I've had a pleasure of seeing one last summer,i was walking my dog an this amazing thing just went full throttle down my street,it was fuckin glorious. There's plenty german v8,some ferraris Maseratis and stuff like that where i live but american cars are super rare. Europen cars sound good, but I've never heard anything as amazing as a Corvette in my life.
I've only been a "car guy" for a year now, learned a LOT of shit over time and fell in love with Japanese cars (specifically Subaru's), but lately, I found a love for American muscle. I've always hated muscle cars. I used to hate Mustangs, now I like em. Corvettes? Used to absolutely fucking hate them but holy shit has that changed. Sounds amazing bro, glad you're enjoying such a marvelous machine. 🙌
Funny cause I hated corvette when I was a kid. The older I've gotten the appreciation I have for ALL cars. Subaru s for instance would fun to go off road (road dirt) or rally type driving on dirt or snow! I say don't have a bias towards one or another enjoy them all
@@Airsoftbros888 Absolutely agree, that’s what I’ve learned now; in the end, we all love the same thing
I’m a total challenger SRT8 head and not so much the newer ones and I love the sound of these Vettes completely the best sounding ones to my ears.
Thanks for watching!
@@Airsoftbros888 no thank you for blessing us with an LS7 fuck the haters they just mad they ain’t got one🤣
The open road
The sound
The clouds
The land
The car
Truly a dream
absolutely stunning sounds, awesome work man!
Your kind words mean a lot to me!
I really don’t tend to like American cars but this engine sounds absolutely gnarly, by far the meanest and best sounding downshifts
just some dudes being dudes enjoying what dudes like. absolutely love the rhetor between these two. amazing how cars bring people together, im sure they both speak of this experience to this day.
Sounds nuts and those roads are dreamy
Thank for watching!
@@Airsoftbros888 where are you located? Those roads look perfect for that car
In Connecticut the backroads are so windy that basically anything larger/faster than an s2000 or maybe a c5 corvette is a waste.
@@schakalicious6023WA state
I'm convinced the people at GM don't love cars because any car lover would keep this sound and feel for all time no car person would trade this for a flat plain crank long live the cross
Fuxking hell, one of the best sounding vettes on YT
Thanks for the kind words
Wow. I’m sure this video does not do justice with how fast that felt. Doing over 100 in a corner like that is crazy!!! Such a great video. Rest in peace to your brother😢🙏
I appreciate your support 🙏 ❤️
I love watching videos like this and dreaming of all the amazing cars there are in this world... then go back to being stuck in traffic in my Ford Focus.
Nothin like a 8000 rpm naturally aspirated V8.
Howling like a banshee, and that downshift blip..... Mmmm mmmmm good
Thanks for watching ! I'm glad you enjoyed ore to come this summer!
IMO this and the LS9 are the greatest engines GM ever made.
Sweet ride, his passenger was shitting himself the whole time 😂
This is what a Miata feels like when you go 45 with the top down
This and the grand sport are my favorite when it comes to noise. Deep, grumbly and overall just nasty. Absolutely in love. Thanks for the video.
“Is this a VTEC? It’s gotta be VTEC, it probably as fast as my Civic! I love VTEC!”
Damn I love my mustang and all but the sound of these LS motors is just better 😢
Imo best sound mankind has ever conceived
Definitely is appreciate you watching!
Whipping those Mexico roads. She sounds like a dream.
Only in Mexico 🇲🇽 lol thanks for watching!
Sounds pretty good. I drive a Audi V10, this corvette must have a decent exhaust/intake setup !! Good job 🤙
Where in mexico is this lovely road? no houses, no intersections. The dream.
I won’t say exactly unless you’re close, but generally speaking in WA state. I agree this road is actually “safe” to drive like this because of all the things you mentioned and also almost never any traffic. I’m all about safety but when you get on a road like this it’s hard not to haul ass lol
I needed this video this morning. Thank you!
Happy to help!
All hail the good ol' pushrod LS motor with that cross-plane crankshaft. Anything LS is legendary. Best V8 engine ever. No dual overhead cams, no flat-plane European junk, no turbos. Either this beautiful NA V8 or slap a supercharger on top without compromising torque and sound.
I love V8 Corvette's since first time when i saw at the Blue C6 ZR1 road screaming with ls9 ( i was 10 years old then,i dream the car so much that days ).
God. İ'm in love ❤
I came here because my heart telling me that, thank you 🙏🏿, thank you everybody 😢❤️
This, the SLS AMG, Lexus LFA and Ferrari 812 super fast are the best sound cars of all time.
omg she sounds soooo good holy fuck sounds so healthy
The incredible ls7
Nothing sounds better than rowing gears through a manual v8
I like alot of different stuff, and am mainly a ford guy, but the ls7 z06 is hands down the most raw drivers car thats ever been produced in terms of sound and chassis lay out. Its definitely on my list of "wants"
Ford, chevy, who cares don't subscribe to a badge, just about ANY car manufacturer has made something fun!
Most cars I've seen, that is driven the way that the factory intended, always has the airbag light on (including mine) 😆 🤣
It was the clockspring In the steering wheel going bad from taking off steering rack, has since been replaced. Easy fix
@@Airsoftbros888 I didnt do anything to my steering wheel but I still go that airbag light on, do you think if I changed the clockspring it will fix it?
@@mesharial-malki5721 in my opinion clock springs are cheap and with basic tools you could do it yourself in a hour to hour and a half. yes I'd try that, I've replaced parts much expensive trying to diagnose a problem. A "dealer or shop" would do the same thing, expect they wouldn't bother trying to save any money
@@Airsoftbros888 if I changed it what is going to different in my car other than the airbag light?
@@mesharial-malki5721 a "clock spring" is just a device that let's you spin the wheel and still have your horn air bag etc. Mine made a clicking noise when turning the wheel like a canceling a turn signal. Yours could be a fuse problem too
American muscle cranking those rpms is the best sound in the world.
POV you n your homie just upgraded from Lexus shitboxes to corvettes 😂
Uh what?
"Don't die over it" lol. I'm the same way. I hit 275 KPH on the way to work in my mildly tune BMW 535Xi M-Sport. The road design, condition, lack of cross roads and traffic allowed my to open it up a couple times with minimal Risk. It does the Quarter in 12.7 and should hit 285 KPH.
It doesn't sound or handle like this though.
Those bmws are very impressive what they can do with just a tune. Thanks for the comments and watching !
An LS7 at 3500-4200rpm is sex on wheels, then you go up past 5500 and you’re high on brain chemicals.
Yes they are very good sounding and performing
his man’s was clinching the whole ride 😂😂
I love these cars so much. And I love when people drive them the way they were intended. I drive a mustang so it’s a wildly different experience, I would love to own a vette. I’m getting a Porsche soon though so I think that will cure my need for corners
Just the sound of this vehicle. Corvettes not only look sexy, they sound sexy too. Frickin love this model of car. All time favorite
sounds healthy
music to my ears
427ci beast 💪
Definitely big compared to other production car engines.
Such a raw and raspy sound, one of the greatest V8’s ever made 😩
The sound god makes when he clears his throat
Honda Driver, that's like when the VTEC kicks in yo!
I want one just like that one 👍🏾
Such a beautiful sound🔥🔥🔥
Sounds so good my dream Corvette
This thing sounds absolutely fucking wicked, nicely done. 👌
nothing sounds better than a built N/A LS
I love NA engines myself aswell 😉 thanks for watching !
man the ls7 doesn’t rev, it roars. holy bald eagles
And even after that the honda driver will say honda's more deluxe car than that
100% my dream car.
It's a very realistic dream car I'll tell you that, I got mine for $31k with 21,000miles. They have gone up since but cost the same as a new camary lol
I would love to drive that road no streets like that in Dallas TX
That mother fucker sounds so good! Sounds like a NASCAR.
Legend has it the wipers are still on the intermittent setting. 😂
Why do wipers have 15 settong anyway, you would think 2 or 3 would be enough
it's the "oooooh shit, hoho listen to that!" that gets me.
Murica 🇺🇸 baby 🔥 🔥
I think you left the hellcat behind 😂
🎺🎺🎺 “Turn your lights on just in case” *Windshield wipers*
I’m not a Chevy guy and dislike corvettes but dang this thing sounds good! I think any car guy can appreciate a wide open road, a great sounding car and a manual transmission.
There's no reason to hate a brand, I used to he like that when i was in middle school but when I actually started buying cars I realized it's more fun when you're willing to enjoy ALL brands from ALL countries. I think a lot of it comes from people having to have what their "daddy" drove. Lol thanks for watching
Wish my 99 6m vert rolled that good
not the HONDA driver freaked out 😂😂
Am I the only one feeling that car needs some alignment work ? The steering is completely offset. Nice sound btw
Put new tie rod ends on right before this video was made. Has had an alignment and $10k invested in suspension now
What a great video. He says "IM NOT SCARED BUT I COULD USE SOME HELP"
HAHAHAHA
Get it man, beautiful sounds! I love those Corvettes and definitely want to get one. But I wouldn't trade my E63 AMG for it.
The sound is beautiful music to my ears 👍🏻🇺🇸
Now Im going for a drive!!!
That’s the spirit
0:04 is the best part lmao
Absolutely 🔥 ❤️
Haha I have more videos of this vette and a 600HP coyote swapped foxbody that revs to 9,000RPM on the way
@@NackteTraube thanks for watching brotha!
An amazingly creative title I give sub 🙂
Hey man, that exhaust sounds brutal, what set up are you running?
Heads, cam, longtube headers, starightpipe exhaust. Let me know ow if you'd like details I can provide them.
I’d really like to know the details!
@@michaeldenson1929 Road is private rd 😉 engine mods:
-RPM B 3 cam
-Ai 280 CC cylinder heads milled and -ported dual Valve springs titanium valves
-Btr pushrods
-reflowed LS7 injectors
-Mamo ported MSD Airforce intake manifold
-Nick Williams 102mm throttle body
-Vararam snake charmer Air intake (don't like this)
-C5.R timing chain
-ATI 10percent underdrive Crank pulley
-Monster Clutch LT-S triple disc clutch and aluminum flywheelI
Exhaust:
-American Racing 2" Headers Catless X pipe
-custom made straight piped exhaust 3" rest of way, no mufflers 4 tips (will be changing to 2 tips with 2 tip diffuser hopefully in future.)
(Since this video)
Suspension/ brakes:
- Van Steel front 35MM Adjustable Sway Bar and Rear 25.4MM Adjustable Sway Bar
-JRi Double Adjustable Coilover Shocks not cheap
-SKF Racing Bearings wheel bearings
-Van Steel/Hard Bar Delrin Control arm Bushing Kit
-AMT motor sport Camber Plate Alignment kit
-AMT Motorsports Vulcan lowered Motor mounts, (if I can recommend one suspension it's these)
-AMT trans vulcan trans Mounts
-Stop tech stainless lines and pads (stock c6 z06 calipers)
-DBA 4000 SERIES T3 ROTORs
-Motul brake fluid
Trans /diff
-trans RPM Transmissions stage 5 T56 trans
-Media Blast Transmission Case
Solid Synchronizer Keys
Bronze Fork Pads on All Gears 1-6 Including Reverse
Bronze Shifter Bushing When Applicable
Steel 3-4 Shifter Fork
RPM Modified 1-2 Shifter Fork
Hand Fit Sliders and Hubs
New Compressed Carbon Blocking Rings
Micropolish by Performance Metal
Cryogenic Processing by Performance Metal.
-RPM stage 3 diff with 3.90 gears
Seal & Gasket Kit
300M Left Stub Shaft
300M 2-Piece Right Stub Shaft
Upgraded Carbon Clutch Packs
HD Preload Springs
Performance Metal Micropolished
-MGW race Shifter. Thanks for watching
@@Airsoftbros888 that is A LOT OF MODS! Have you ever dynoed it? What are the numbers?
@@MrHEMI260 yeah one time was like 620s on I inflated dyno
Damn. Mexico scenery is mesmerizing.
Not a car in sight...
Damn dude needs to relax 😂 professional yapping
Yeah if I drove a slow ass 5.3 pickup I understand how u could say that
Yeah don't mind the sound of god in those exhaust pipes.
What a kickass upload 👍 eargasmic
Glad you like it!
Sounds exactly like my 17 Camaro SS with catless headers and no muffler. 😅
This has quite a few more ponies but Id love to hear yours
@@Airsoftbros888 Yeah...mine is still pretty much stock except for the headers, muffler delete and Throttle Controller....but it sounds exactly like your LS7.... honestly it's hard to distinguish between the LS3, LT1 LS7 engines with exhaust mods...I really can't tell the difference.
Awesome sound 👍🏽👍🏽
Glad you like it!
Sound of happiness
Appreciate you watching and I agree 👍
honda bro caught a stray 😭
A die hard mustang owner and fan, but I sure do wanna add a c6 to the collection 😮💨💯
I would, I'm not a "vette" guy or chevy guy, I'm a car, truck Semi truck guy. That being said, I would absolutely recommend a c6!