i thought that was the best project. cud also be used by law enforcement . that device might be useful for tracking high speed small drones.. and perhaps using laser or microwaves or? to disable the drone in flight?
This was 6 years ago, and that shows amazingly well. It’s interesting to see how much of this stuff is now very common. Not only in consumer products, but also in electronics as off-the-shelf miniaturized low priced modules. Those can do a lot of the ideas presented here, but in a much more refined way. It’s good to see the progress that has been made for the past 6 years! Still, they were nice and fun projects and the students must have learned a lot by making them! 👍🏼
Genuine question though, once the motors are activated and the chair goes forward with speed, how would you control it if some sudden obstacle comes in the way? Would be difficult to stop the motion with ease I suppose.?
This looks like the Professional Practice Program aka Senior Design Project that all undergraduate students participate in when most or all engineering curriculum courses are fulfilled. Amazing!!
It's crazy. I've seen this video so many times during middle school and I am already a senior in high school. This video influenced me a lot, and even though I am not going to pursue mechatronics or mechanical (i'm doing cs), this video motivated me to pursue something to do with electronics.
This video is inspiring me to regain confidence I’m my career choice. I want to feel and BE an engineer. Programming came up as fun and enjoyable, I’m only on the surface tho, hope you like it, keep me updated! ^_^
i wasnt sure what to study, although i was already thinking about Mechatronics, but i was not sure, i had the feeling that i couldnt do it. Now I see this and I finally realize that if they could, I can too. like, look fido, it's simple but really interesting. ofc, i'm nervous asf lol
@@zebruhmlz8801 No, classes numbered in the hundreds mean upper division classes. So one would expect these students to have been in their third or fourth year.
It’s crazy for me to think that this was 7 years ago. I was 11. Now I’m coming out of highschool after being on a robotics team and learning to code and finding a million uses for a raspberry pi around my house, realizing how I experienced some of these as they came into the market. The camera gimbal is my favorite, I study film on in my free time and now a lot of gimbals have the ability to do motion tracking very accurately.
I can't believe how amazing all of these ideas and projects were. And this was in 2014 bro. Can you imagine how much those people improved or even just had fun with all this? This is a great video that I wish touched more peoples home page
I love artificial intelligence and robotic system but have no idea where to start. Love you guys making an impact to improve the face of technology in a different dimension.
I'm so jealous of universities like this, when I was in undergrad people usually constructed their projects out of cardboard and were lucky if they worked for the entire length of the demo. 3D printed parts? well thought out design followed through from the initial stages? maybe one or two.
The best lead in for these young students is to find something that they like and try to apply what they've learned to it. You're not going to be very long in this career if you're not doing something that you enjoy
I completed my engineering degree 8 years ago. Back then I was very much enthusiastic and full of dreams just like these students. Now I have to do sell engineered products, for living. As a guy from a third world country, I guess marketing or ecommerce is what I should have learned. I hope at least these guys have found the best out of these innovations.
If the purpose wasnt to kill people, then he would have moved a mirror to track objects, he wouldnt move the whole laser assembly. He s def gonna mount a gun on that thing :D Cool project!
I like your "Fido" robot. I built something similar in the 90's, but it was less sophisticated. To balance it I built a small gyroscope placed on the four wheeled rover like vehicle that drove within the hamster sphere, and was radio controlled. It wasn't perfect, because my home-made gyroscope needed some kind of speed control to respond to various forward, and backward turns made from the RC operator.
I already created the “food printer” for Pizza Hut, toss pan with dough on top, 3 grabbers slide to center and grabs pan to secure it and to gather size of pizza, turn table would spin and dispenser will spray the oil & sauce onto the dough evenly from the center out. Pretty proud of the unit.
"I created a revolutionary 3d printer that has an order of a magnitude higher resolution than anything found today on the market" "uhh so here's my desktop greenhouse"
I don't know man. I've seen pretty cool projects getting done in lots of Indian colleges nowadays. But sure, we do have a lot more room for improvement.
Awesome 👍 Projects .... Guys.. I'm too Mechatronics Engineer... Education system is very much important for the development of students... You guys are really blessed because ur not borned in India... All the things are good here Except education system... I'm really happy to see your projects .... But I'm too late ...
True that... education in India sucks unless you are from tier 1 college. We know how we used to make our final year project. And all the projects in this video are not even difficult to make. Just a proper guidance is what is required. Well it's student mistake too. After all ik hath see taali nhi bajti
Me too, and my final project was a robot arm that played checkers with a webcam on an empty board where users pointed where to move the pieces and saw the virtual board on the screen. So many days at the lab and the software is soooo bad in hindsight. We actually wrote our own TCP server in python that isn’t even asynchronous, lol. It was strictly request-response. I believe you just feel dumb because any sufficiently advanced thing overpowers your brain, but if you break it down into the details, it’s not that hard. And you don’t see all the terrible, hacked together components inside, haha
That mustache myfriend, what you will never forget. She definitely took marketing 101 class.
@Science and technology no
@@mrsnoop1820 but he/she said please
neutral1453
I'll never forget it... -because it made the bot cuter and creepier at the same time-
I want this project report
Guy: this here tracks the motion with the laser sight.
Application: military
@Science and technology no
Lol
i thought that was the best project. cud also be used by law enforcement . that device might be useful for tracking high speed small drones.. and perhaps using laser or microwaves or? to disable the drone in flight?
@@manp1039 that one is usefull for military purposes, but i like the girl who make 3d scanning in the last one. Its pretty usefull too
Lol, I thought the same
This was 6 years ago, and that shows amazingly well. It’s interesting to see how much of this stuff is now very common. Not only in consumer products, but also in electronics as off-the-shelf miniaturized low priced modules. Those can do a lot of the ideas presented here, but in a much more refined way. It’s good to see the progress that has been made for the past 6 years! Still, they were nice and fun projects and the students must have learned a lot by making them! 👍🏼
The objective of these projects are so that the students will get a hands on experience of how things should be done.
That wheel chair was dope ,common that's worth an ovation
i really like the interface. Instead of a joystick we have traditional controls with less hassle. Plus the normal wheelchair can be converted
I’ve seen a few people in wheelchairs using something like this. Don’t know if these students were the ones to make them, but it’s become a product.
unfortunatly not a standing ovation
Mashallah tbark Allah alhamudillah inshallah better astgfrallah
Genuine question though, once the motors are activated and the chair goes forward with speed, how would you control it if some sudden obstacle comes in the way? Would be difficult to stop the motion with ease I suppose.?
Do you also have to wear a mustache to control Fido
Yes, the mustache is passed down from generation to generation to control and contain his powers.
yes
@@tudorarthur5887 omg lol
Dat ws wonderful...nice presenter
Yeah the sensors are installed in the moustache.
Self leveling tripod is the project that I loved the most. I would love to buy that.
Me too. You R right as this project is pretty much a product for everyone now a days.
I think that a gimbal in a tripod ?
We have camera gimbal now.
No you won’t
That's pretty basic use of accelerometer or gyroscope
combining all projects will give us a working ironman
Right bro
Or a working Terminator.
Odading
@Big One why not ?
Emergence of Mr. Simpleton
I appreciate how much time and dedication they put into their project. *Mecha Heroes!*
that last idea is amazing!!
Mechatronics Rocks!
@Science and technology No
@@userfibonnachi Lol
This looks like the Professional Practice Program aka Senior Design Project that all undergraduate students participate in when most or all engineering curriculum courses are fulfilled.
Amazing!!
It's crazy. I've seen this video so many times during middle school and I am already a senior in high school. This video influenced me a lot, and even though I am not going to pursue mechatronics or mechanical (i'm doing cs), this video motivated me to pursue something to do with electronics.
This video is inspiring me to regain confidence I’m my career choice. I want to feel and BE an engineer. Programming came up as fun and enjoyable, I’m only on the surface tho, hope you like it, keep me updated! ^_^
Counter strike
i wasnt sure what to study, although i was already thinking about Mechatronics, but i was not sure, i had the feeling that i couldnt do it. Now I see this and I finally realize that if they could, I can too. like, look fido, it's simple but really interesting. ofc, i'm nervous asf lol
4th time watching
i never thought of collage projects would be like this. you guys are amazing
What year are these people in? Dam they're well funded.
xToTaLBoReDoMx 4th year undergrads.
Final year I think ..
Most of the times these projects are not funded in undergrad
Ameen Y are you sure it’s 4th year? It says ME102B, the “1” denoting first year (I thought at least)
@@zebruhmlz8801 No, classes numbered in the hundreds mean upper division classes. So one would expect these students to have been in their third or fourth year.
I'm a Mechanical Engineer and I love, When I went to school I didn't have this class, but i will take it with online materials. Keep doing a great job
It’s crazy for me to think that this was 7 years ago. I was 11. Now I’m coming out of highschool after being on a robotics team and learning to code and finding a million uses for a raspberry pi around my house, realizing how I experienced some of these as they came into the market. The camera gimbal is my favorite, I study film on in my free time and now a lot of gimbals have the ability to do motion tracking very accurately.
I can't believe how amazing all of these ideas and projects were. And this was in 2014 bro. Can you imagine how much those people improved or even just had fun with all this? This is a great video that I wish touched more peoples home page
I love this video. Its like the scene in big hero 6 where hero goes to his brother's lab and sees all those crazy inventions
Ikr,so awesome
Nice project catalog. You guys did a wonderful ground work for next startup.
I love artificial intelligence and robotic system but have no idea where to start. Love you guys making an impact to improve the face of technology in a different dimension.
These projects are just amazings. This gives me an inspiration to do Engineering
That 3D scanner/printer at the end was cool, worth the wait
Watching in 2021, 7 years back these people build these things and I still figuring out how to blink led in arduino.
Well done
I'm so jealous of universities like this, when I was in undergrad people usually constructed their projects out of cardboard and were lucky if they worked for the entire length of the demo. 3D printed parts? well thought out design followed through from the initial stages? maybe one or two.
Come on! The one guy just repurposed his Iron Man cosplay for his school project.
It was kinda badass tho ngl
Science and technology no
Or he managed to make his cosplay during school time.
Either way he got plenty of smart.
The best lead in for these young students is to find something that they like and try to apply what they've learned to it. You're not going to be very long in this career if you're not doing something that you enjoy
Having a creative mind and ideas to make your dream into reality
They all did great jobs!!! This reminded me of my college days when I did something similar.
Which college bro :)
I can watch these all day.
I completed my engineering degree 8 years ago. Back then I was very much enthusiastic and full of dreams just like these students. Now I have to do sell engineered products, for living. As a guy from a third world country, I guess marketing or ecommerce is what I should have learned. I hope at least these guys have found the best out of these innovations.
What have been invented?
To save nature and our planet?
@@ktv9999 I showcased a energy conservation automation concept for street lamps. Long time back.
11:42 "The Android phone has an Android App on it..."
It's Big Brain time.
Could be an web app
The floor here is made out of floor
Almost killed me
@@lioscar80 im dead
THE MORE U KNOW
Fantastic projects everyone ! I had application ideas for nearly every one of them
The first one is by far my favorite, lot's of practical use :)
That power assisted wheelchair is really good.
They are a real product I’ve seen people in wheelchairs use. Not sure if the students here took their project further or not.
Enjoyed every single second
I liked the auto gear shift! Very useful!
I was searching for this video just a week or so ago, Thanks yt recomedations
someone made a sentry gun lazer lmaooo and they are talking about tracking particles 😂
when he said it has many uses I was like yeah like tracking people and killing them
@@malimeefr there's a video on youtube,the made a super effective mosquito killer with that
@@seven4280 that would be a hazard to eyes
@@nilaksh007 yeah ,that was the first thing I thought too
If the purpose wasnt to kill people, then he would have moved a mirror to track objects, he wouldnt move the whole laser assembly. He s def gonna mount a gun on that thing :D Cool project!
The gopro dude project was awesome!! could you imagine that?
Now it's mass produced
Wow. I keep coming back to this video
Really cool projects. Well done guys.
I love living in the Loop !
We can do anything !
4:04 Disney Star Wars: "I'll take that"
Fido was acquired by Disney's Star Wars
Jurassic world pods
That's the droid i'm looking for
Thanks, you bright young things because now in 2020 these things are easier for us hobbyists to achieve.
Gostei da moça de bigode ecrã idéia da bola , ficou irado 👏👏👏👏
I like your "Fido" robot. I built something similar in the 90's, but it was less sophisticated. To balance it I built a small gyroscope placed on the four wheeled rover like vehicle that drove within the hamster sphere, and was radio controlled. It wasn't perfect, because my home-made gyroscope needed some kind of speed control to respond to various forward, and backward turns made from the RC operator.
That speherical robot is the best. The hardest motion ever that can model
mechanical engineer is my passion , bekeley as well so i hope that you have more video !!
All the projects are pretty cool.
Can I transfer to your uni? You guys seem to be having lots of fun, and passionate about your studies
1:43, that girl looks like Mike from Stranger Things...
@@clairew1928 thats you 😍
It is
Lol thats true
But she was cute🤗
She is cute.
Love these Mecha projects 😍
I loved the robot at the begging, simply awesome !
I already created the “food printer” for Pizza Hut, toss pan with dough on top, 3 grabbers slide to center and grabs pan to secure it and to gather size of pizza, turn table would spin and dispenser will spray the oil & sauce onto the dough evenly from the center out. Pretty proud of the unit.
What really ??
Can I see
11:31 : I want to be the girl on the "car" if i had to do a presentation xD
@Science and technology Subscribed your channel
Lol
Woa! It's amazing
I love all projects
when it comes to application of these technologies these ideas are "interesting" to say the least
5:58 the most reliable so far
These students are the future of the world.
a long time ago, I had one of these (ME102B)ish. It was so neat.
Projects in our college r like... blinking led, hello word 🤣
3:28 The cutest thing ever
Am I the only one who is watching and Enjoying these projects in 2021 ???
Nice innovative work all of you. Good job
"I created a revolutionary 3d printer that has an order of a magnitude higher resolution than anything found today on the market"
"uhh so here's my desktop greenhouse"
Gold☠️☠️☠️
6 years later I can buy all this things on Amazon
These students are the coolest 🧡💥
I loved the bicycle one!
University kids at California : creating mechanical projects
University kids in India : solving hc verma , cengage , N avasthi problems . :((((😒😒
Isn't HC Verma meant for high school kids?
Lol xddd 😆 ja ke questions solve kar phir inki company me kam mil jaye ga😆
I don't know man. I've seen pretty cool projects getting done in lots of Indian colleges nowadays. But sure, we do have a lot more room for improvement.
If you think so, Then you have to visit a better Indian project exhibition
Nope
Cool mechatronics projects from Prof. Kazerooni's mechatronics class at Cal. Go Bears!
I wonder and would love to see what kind of projects are being done in 2021 these days
7 years ago and still amazed
5:08 : you can attach it to a quadcopter
DJI : ummm, okay!
10:45 this guys invention as well looked like something from DJI
the guy at 7:20 looks like he plays yu gi yo for a full time job.
But he looks even more like Omar Isuf (look him up on CZcams to be blown away)
All of this have great potential
Just by watching I learned many ideas and bg mixing many more ideas hit me.
Only if my university funded my ME department really well! We would have had good projects!
How the heck do they make industry ready models?! 🤩
Loved all projects....❣️
Great projects, keep up the efforts
10:16 GoPro Karma Grip right there, which was released a year later
2:13 girl is love
God I love the confidence of that distinguished gentleman known as Fido
Very beautiful projects. I wish someone designed something associated in the 4th dimensional space
1:40 we all know what plant cheers us up :) the micro weed box for dorms student homes and lonly stoners
Dat growhouse
Skynet chyeah. be growing crops son..
also she could get into home growers that are controlled by an app.
It was cool, each one of them, just out of curiosity all of it is great.
Very inspiring & lovely video
Make my day
and these projects are 6 years ago!!!
Holy mother of god are these undergrads? What year?
fcmilsweeper9 4th year undergrads
That's cool invention.Love it!
I've never seen female students in my class. This Is amazing and very interesanting projects
6:08 is iron man helmet
That mustache caught me off guatd
Awesome 👍 Projects .... Guys.. I'm too Mechatronics Engineer... Education system is very much important for the development of students... You guys are really blessed because ur not borned in India... All the things are good here Except education system... I'm really happy to see your projects .... But I'm too late ...
True that... education in India sucks unless you are from tier 1 college. We know how we used to make our final year project.
And all the projects in this video are not even difficult to make. Just a proper guidance is what is required.
Well it's student mistake too. After all ik hath see taali nhi bajti
Very inspiring projects!
7:20 did this man just build an aimbot for defense drones?
I think so yes
Imagine other countries calling USA an aimbotter lol
Yup. He definitely didn’t think of the “application” he described.
2:06 she is cute
Simp
Simp
She is cute
@@theflaminglionhotlionfox2140 no
@@thanhvinhnguyento7069 simp
12:18 amazing how far technology has come!
The bicyle one is amazing
I feel that I'm literally stupid after watching this tech exhibition...
Maybe we are
It's mostly electronics why do they even call it mechatronics?
@@ifigetbannedagainyoutubeis2018 cuz it's a machine that works with electric energy
Me too, and my final project was a robot arm that played checkers with a webcam on an empty board where users pointed where to move the pieces and saw the virtual board on the screen. So many days at the lab and the software is soooo bad in hindsight. We actually wrote our own TCP server in python that isn’t even asynchronous, lol. It was strictly request-response.
I believe you just feel dumb because any sufficiently advanced thing overpowers your brain, but if you break it down into the details, it’s not that hard. And you don’t see all the terrible, hacked together components inside, haha
@@martinn.6082 yeah you're right. then that makes us lazy , hmm even worse