How I Made 100 Miniature Cups - ASMR Edition
Vložit
- čas přidán 3. 06. 2024
- Here's my ASMR version of my latest video, that shows how these tiny cups are made. If you'd rather watch the fully narrated edition, that goes into FAR more detail about each step, you can find it here: • Making 100 Miniature Mugs
In this weeks video I'm creating 100 miniature mugs, espresso cups, (a little on the large side), that were made as gifts to be sent out with my book to certain people. I cover the throwing, trimming, attaching and pulling the stoneware handles, how I dry them effectively so cracks don't form, the bisque firing, waxing, glazing, reduction firing to cone ten, (1290ºC) and finally how I sand their bases once unpacked from my Rohde gas kiln. There's a lot of steps in this video! Thanks so much for taking your precious time to watch!
🤲🏻 • How to lift pots off the wheel: • How to Lift Pots Off t...
📖 • ORDER MY BOOK: geni.us/bymyhands
📏 • Here's a link to my friends throwing gauges: www.darrenellispottery.com/sho... (Darren makes wonderful pots and tools and in no way is this link sponsored).
📢 • Find out much more about my work here: linktr.ee/floriangadsby
⏱ • Timecodes:
0:00 - Introduction
0:40 - Weighing out and wedging the clay
1:38 - The throwing tools I use
2:01 - Throwing the cups
4:50 - Drying the cups out effectively
6:15 - Trimming the cups using a 'chuck'
10:19 - Handling the cups
16:39 - Quality control
18:02 - Packing the electric kiln for a bisque firing to 1000ºC
19:10 - Unpacking the electric kiln
20:00 - Waxing the bases of the cups
21:13 - Glazing the cups
23:25 - Cleaning the glazed cups ready to be fired
25:40 - Packing my Rohde KG-340 gas kiln
26:50 - Reduction firing the kiln to 1290ºC
29:29 - Unpacking the gas kiln
31:21 - Sanding the bottoms of the pots
32:33 - How I packaged them up for shipping
33:36 - Clean up
I throw using both a Rohde HMT 500 & 600 potter's wheel and fire using Rohde kilns too, the electric is a TE-200 and the gas kiln is a KG-340.
____
Instagram - / floriangadsby
TikTok - / floriangadsby
Website - www.floriangadsby.com - Jak na to + styl
the sound of the glaze fired pots cooling down is soooo nice 😻
I made four large mugs yesterday, trimmed the bottoms and put three handles on. I sure can't imagine doing this many but I haven't done production work before.
Trimming is like making a piece twice. No need to trim mugs or most forms... bowls maybe...
Florian, I've just started reading your book, just barely into it actually. You are the same age as my son who is a software engineer and has been a doing pottery as a hobby for a few years. I am a potter of about 10 years. I'm loving reading your words and knowing your voice from your videos makes it even better. You are a fantastic writer as well as artist. I can't wait to have more time to get deeper into the book. Thanks.
What wax do you use for the bottoms?
Wow!
amazing 🙌🙌🙌
Hi again sir Florian! 😊 What's the time frame for throwing them all and then trimming them all? Also wondering why you chose the wax method over just wiping off? Just a preference or is it something more technical? Thanks for your vids!
What glaze are you using? Its beautiful
Do you have any recommendations for repetition throwing by eye? I'm trying to make a set of 10 identical mugs but I dont have a throwing gauge. Thanks
You can just stick a brush on a long dowel or a chop stick even, into a lump of clay at the desired height and width, then throw to that. You don’t need a throwing gauge. Good luck!
Tacka👍👍
please wear a mask when working with the powdered glazes
Is there a woman signing opera next to your shop ?
There is! My neighbour, she sings and produces all kinds of music.
first