9 month review of Polaris xpedition and what I’d do different
Vložit
- čas přidán 4. 05. 2024
- This video ⬇️
Polaris xpedition northstar build and accessories
• Polaris xpedition nort...
will show in bio by clicking more below the video all my accessories and how to get them
Love the yard stripes 😍
Thanks buddy
Very informative, thanks for sharing
Glad it was helpful!
I did the new system 3 ATX370s 32s with 4+3 beadlocks they are perfect with the fender flares.
Sounds like a good setup. Do you like the system 3?
Do you have any issues with front end alignment? I have a 2 door and it pulls to the left terrible. The dealer aligned it, but still pulling to left. Also, I had a sound deadening installed on back wall, but still terribly loud.
So far I haven’t had alignment issues. Have you checked the threads on both tire rods as in how far they are from the locknut? If so, do they seem to line up evenly?
where are you whips, cube lights in the back and brackets from as well as the front light bar??
This video in bio
Click MORE below video
Polaris xpedition northstar build and accessories
czcams.com/video/NF8wxtV6H-I/video.html
Can you link the whip lights here for me please? Having trouble finding them. Thanks!
amzn.to/4bGkAxK
Installing Fat Whip lights on or 2024 Polaris xpedition
czcams.com/video/2jft6Gp2cdg/video.html
Other than the shifter area does it do a good job keeping dust out?
Yes
Dimpled Rotors were a failed experiment. They did disapaite heat better than the standard rotor but they caught more dirt and debris thus costing more to fix the brakes, calipers and so on
I could see that happening
Yep, that’s the machine I’m after. Hope so one day. Agree that I’m excited to see Can Am’s response to the Xpedition.
It’s a great machine.
Y’all would have to switch your CZcams name 😁
@@americandream_89 I know right!! I’d be branded as a traitor haha.
@@UtahCanAmFam at some point we all become a traitor in that since. Happy trails buddy
So did they fix the loudness inside it?Because I heard they were very loud. Thanks.
For now the only thing to compensate for cab noise(as in lower DB in cab) is to get the clutch kit offered from Polaris. That’s what I was referring to in the video. It works well but drops rpm over the range reducing peppyness over your throttle. I really like the factory power delivery so I haven’t got mine done.
I had my clutch updated and it’s still loud.
What wheels are those? I like that look!
Thanks
High lifter makes them but they are hard to find
www.kjmotorsports.com/high-lifter-by-sti-hla1-beadlock-15-wheels-machined-polaris-rzr-turbo-r-pro-r-ranger-1500-xpedition
Can you please provide a link to your video on the sway bar shocks you have installed? Thx.
Let’s get this polaris xpedtion to flex better
czcams.com/video/BtLTEoCKj-Q/video.html
@@americandream_89 Thank you very much. Did you end up only doing the rear after all? Or front also?
@@scottgahimer2990 just the rear. The really improve after about 50 miles of use
Read the bio below video by clicking more
How much air do you run in your tires?
Around 10-12 psi sometimes a little more
Does your clutch clunk when engaging?
Yes
That's a normal noise, it's due to the EBS machining that the helix has.