Laid or Sprayed? Vinyl vs VHT spray headlight / taillight tint
Vložit
- čas přidán 8. 09. 2024
- In this video I compare two methods of tinting your headlights or taillights: spray and vinyl. For the spray, I used VHT Nightshades; and for the vinyl, I used Vvivid headlight/taillight tint. I'll show you how to apply each product then discuss pros and cons I found with each.
@VViViDVINYLS
Get VHT and Vinyl Tint at these affiliate links:
VHT Tinting Spray: amzn.to/3p2Q8VO
Vvivid Bio Pulse Holographic Headlight/Taillight Tint: amzn.to/3hJxIpf
Vvivid Holographic Hex Headlight/Taillight Tint (Micro pattern): amzn.to/2RN4cUY
Vvivid Bio-Hex Headlight/Taillight Tint: amzn.to/36uowTP
VViViD 2020 Edition Clear Micro Bio HEX+ Air-Tint: amzn.to/3qyrEVl
Vvivid Light Smoke Gloss Headlight/Taillight Tint: amzn.to/3hWcV29
Vvivid Dark Smoke Gloss Headlight/Taillight Tint: amzn.to/2RLHkoW
Vvivid Light Smoke Hex Headlight/Taillight Tint: amzn.to/2Eiwgwu
Vvivid Dark Smoke Hex Headlight/Taillight Tint: amzn.to/3kAbGak
Vvivid Light Blue Headlight/Taillight Tint: amzn.to/3chh7bd
Wrapping tools:
REV Brand Heat Gun: amzn.to/2Hm955P
3M Blue Squeegees: amzn.to/3mHuI0C
3M Gold Squeegees: amzn.to/3mNQeAO
Micro-squeegees: amzn.to/2Sofkbn
3M Finish Line series Knifeless Tape: amzn.to/32N6Ctd
3M Design Line series Knifeless Tape: amzn.to/3ckvGuW
Vvivid Utility Knife: amzn.to/35WVZ99
Olfa Stainless Steel Body Utility Knife: amzn.to/2RKAgsQ
NT Cutter 30 Degree Snap Off Blades for Utility Knives: amzn.to/3cfTiRf
Olfa 30 Degree Snap Off Blades for Utility Knives: amzn.to/3kM1Brd
Vvivid Wrap Gloves: amzn.to/33KfBe2
Benzomatic Torch Head: amzn.to/3qxCfAJ - Jak na to + styl
It would be nice if you would’ve shown a comparison of both of them in dark settings
Vht isn’t permanent. Just use isopropyl alcohol
Thank you very much for your helpful Video.
Thank you and thanks for watching!
First like love your stuff man! I did a diy tint on mine had to redue it because of bubbles but easy and cheap enough. On the front fogs not the rear.
Thanks for watching and for your support!
You can remove VHT with VHT itself. There's a video of a guy doing so as well
Vht u can remove with brake cleaner
and that will mess up the plastic of your lights
Your the man
can you not just remove your tail lights for better application for either product. also could you not use a clear coat on the VHT to help protect the paint. Thank you great video!
Thanks and thanks for watching. So, for removing the tail light or head light, I would say for VHT that's fine but for applying vinyl, it's actually easier with the light still on since the car holds it in place for you while applying. You could also clear coat the VHT if you wanted as well.
For the vht when it wears out could you scuff sand and re apply to make it look good again?
I'm not sure about that. You probably could, but I've never seen anybody do it nor do I know anybody that has.
I realize Im kind of randomly asking but do anybody know of a good place to watch new tv shows online ?
@Keegan Gordon I use flixzone. You can find it by googling :)
@Kevin Noe yup, I've been using flixzone for years myself :D
@Kevin Noe thank you, signed up and it seems to work :) I really appreciate it!!
Fingernail polish remover wipes away the tinting relatively easily. The spray isn't permanent but if you do choose the spray over the vinyl I strongly advise removing the entire assembly before application or with wiping off with fingernail polish remover. It's actually faster and you don't need to mask anything off. Zero worries of overspray or damaging paint/trim. This is clearly a video of a favor to the wrap. Also to end. If you spray 2 light coats of clear coat over the desired tint it won't fade and will last as long as any paint job. The spray is easier and funner. Price is same. Biggest con of the vinyl is anyone can peel it off your car with a knife. Can't do that with the spray.
Thank you for the feedback and for watching!
Yes, VHT (and paint for that matter) isn't truly permanent since it can be chemically removed (acetone, paint remover, etc) or physically removed (like sanding). For the comparison about VHT being permanent, it was more about how wrap can be much more easily removed vs VHT. For wrap, you just peel it off, as you noted. Sure, someone could peel it off, but I would think that would be unlikely. Also, the ease of removeability for the vinyl may be more beneficial versus a paint application for some people. For example, being able to pull vinyl off immediately could possibly get you out of a ticket when the police pull you over (one could offer to remove the wrap on the spot for the officer, which may convince the officer to let you go with just a warning instead of a ticket). Also, if you wanted to go lighter, it's much easier and faster to just pull off wrap and put a darker one on. If you wanted to go lighter with VHT, it would be more of a process.
I do favor vinyl wrap since that's my thing, but I fully acknowledge paint (and its variants) have their place. Even some of the best wraps can't match the depth and luster of the best paint jobs.
In the end, it's about personal preference. I don't think there's really any right or wrong, more so than it's what you prefer or not.
Best is a professional paint booth. 2oz clear with 3-6 DROPS of jet black. No more than 6 or it will be too dark to see through.
Obviously you need access to a booth. Lasts forever.
Do it to all my cars. I do 4 drops
Nice! Thanks for the tip...definitely a good option for those looking to go the paint route.
@@ColorChangeCustoms it’s definitely the most durable. Also has the great gloss and repair ability of your paint. You can wet sand and buff when scratched.