depends who is doing the work, hacks are handy if your local hardware is a heck of a drive or places that require boats to travel a distance often 1 to 3 months a part, so massive amounts or certain things need to be done to keep things moving, look at those who live on isolated islands! Be thankful someone may have solved a dilemma that would other wise need to wait for a part that is not needed with people creating hacks. Have an amazing day!
These are some of the best hacks I've seen and the one's in this video are things I actually would use and are some of the most simple but huge hacks 👍👍
Then download it and go listen to it in your own room. I don't like it imposed on me in my room where I want to watch the scenes & listen to the narration in quiet.
These are good. Some hacks are so time consuming or require materials I don't normally have on hand, I'm better off just buying what the hack is mimicking.
Amazing, they are blessed to have walked away from that situation that could have been a situation that many Men and Women do Not have the same opportunity to walk away from.... GOD Bless em!!!
The tip for the toothpaste tube isn't necessary. I just use a convenient 90-degree angle, such as along the top of a drawer edge, to flatten the end of a tube. Been doing it for over 40 years.
Just wanted to add one comment.... soap may work great to help drive screws but the moisture can cause screws to rust prematurely. Paraffin is a better option. just drag the screws across a section of candle.
Not as good of an idea as it sounds. I've used soap for _thousands_ of screws, and I'm constantly re-using old screws. Paraffin doesn't glide as well, and soap is only mildly basic. The wood itself-and certainly the moisture it contains-might be further away from pH neutral than a mild white soap. Even of you were to spray a screw with oven cleaner first (which is way more basic), it would still take more than that to dissolve the metal of an entire screw. Far more important considerations should be the moisture of an environment, electrochemical stressors, and the type/thickness of the fastener. And of course, time; here on Earth, we have an oxygen-rich atmosphere, so everything is in a slow burn of decomposition.
What was the music that was played during the steam iron PVC pipe and circling lawn mower segment? Please, artist and song with the woman’s high voice.
Human ingenuity never ceases to amaze me. Seems as if part of the species is focused on creativity, beauty, and uplifting the conditions of our fellow man - while, sadly, many others are bent upon destroying , medicating and killing each other. Seems as though the species is a bit schizophrenic!
Almost all keys are made from non-magnetic material. The main magnetic metals are Iron and Cobalt. No one makes keys out of Cobalt, and keys made out of Iron are bad because iron can rust away which is really bad for keys.
A fact I knew and for that reason why I knew people were lying when they demonstrated how the COVID vaccine made them by showing keys would stick to them. Nah. They were just nasty and in need of a shower.
2:40 - What kind of adhesive did he put on the bottle cap to stick it to the car, to remove the dent? He put something on the cap, stuck it to the car, then when he was finished pulling the dent out he sprayed something on the cap and it came right off.
SOme of these are good tricks, but some are just junk. BTW I never heard of a Trowel called a Spatula before... I guess I can use my kitchen utensils as tools for painting now.
While some of these are cool little tricks to get screws out and whatnot that don't really matter to anyone, but you personally, don't shrink a plumbing pipe with a lighter to make it fit, use the proper couplings. Doing it incorrectly is just asking for trouble. It is advice like that for why codes and regulations exists and most people should not be doing DIY.
12:47 you gonne ruin your chain, bushings and sleeves are oiled or greased before assembly, if the chain is cleaned with alcohol or acetone, these oils or greases will wash out and the chain will rust from the inside, it is almost impossible to get oil back to these places do to too high viscosity
haaaaa...how many ol' dudes have ALREADY done some of these?!! Good tips, for sure! Ouch...that old framer with the crazy-long beard is sure gonna regret it someday! Don't ask! :-)>>>
It's nice to see that the human mind has not lost all of It's creativity.
This channel is what keep me going every day! Love every bit of this video!
*This is one of the best "handy tips" videos I've seen. Most others are not very useful, or everybody already knows them anyway.*
enjoyable to watch, thanks for the idea's
I enjoyed your video and I gave it a Thumbs Up
Love the first one!
Finally a new vid, better go grab my popcorn
thanks for sharing great tips
Great channel and brilliant video. What is the first bit of ,music used tho please
thanks for sharing great tips. Definitely gonna try some of these for sure.
Wish there was more detail on the solar panel at the end. Would be a fin peoject with the kids
YOW! The sparks from that homemade car starter look like a recipe for a nice explosion if there's any H₂ leaking from the battery.
A visit to the local DIY store would be not only way simpler but much, much cheaper and a heck of a lot safer.
depends who is doing the work, hacks are handy if your local hardware is a heck of a drive or places that require boats to travel a distance often 1 to 3 months a part, so massive amounts or certain things need to be done to keep things moving, look at those who live on isolated islands!
Be thankful someone may have solved a dilemma that would other wise need to wait for a part that is not needed with people creating hacks.
Have an amazing day!
Creative idea bro👍
Thanks for your channel
Nice stuff!
I finally found a dowel at the bottom of my bucket of old spray paint caps and I have to say this trick really works.
These are some of the best hacks I've seen and the one's in this video are things I actually would use and are some of the most simple but huge hacks 👍👍
Love the music!
Then download it and go listen to it in your own room. I don't like it imposed on me in my room where I want to watch the scenes & listen to the narration in quiet.
Anyone know what the lady put on the sidewalk and was washing away with the power washer???
IDK about copyright but I think you're bringing @kuvaldaru a lot of subs after this one!
i just made the tiny screwdriver to fix my glasses and it worked great.
13:44 pro tip think before drilling holes in your ceiling
I cant take no more ...
greeting from a german engineer xD
Very good video
Why are you calling every screw a “self tapping screw”? There are many different types of screws and non in the video are self tapping screws
These are good. Some hacks are so time consuming or require materials I don't normally have on hand, I'm better off just buying what the hack is mimicking.
These shows are in love with creating wire strippers. I guess for those people that can't afford the dollar store but have $2 of supplies on hand.
Yes, most everyone has a metal lathe in their tool box.
There is nothing that can't be done with duct tape & zip ties. Those 2 items will keep the world from falling apart.
I show these to my grandma when she falls asleep, better than coffee
Does anyone know the name of the music played during this video and where I can buy it?
Futuristic construction is incrible others 😮😮😮
Amazing, they are blessed to have walked away from that situation that could have been a situation that many Men and Women do Not have the same opportunity to walk away from.... GOD Bless em!!!
You maybe should look up the definition of self-tapping screws before your next video.
But what about the self tapping paper clip and the self tapping broom... 😂
I like how you used the self tapping lighter to melt the pipe
What’s a self-tapping lighter?
The tip for the toothpaste tube isn't necessary. I just use a convenient 90-degree angle, such as along the top of a drawer edge, to flatten the end of a tube. Been doing it for over 40 years.
Just wanted to add one comment.... soap may work great to help drive screws but the moisture can cause screws to rust prematurely. Paraffin is a better option. just drag the screws across a section of candle.
Not as good of an idea as it sounds. I've used soap for _thousands_ of screws, and I'm constantly re-using old screws. Paraffin doesn't glide as well, and soap is only mildly basic. The wood itself-and certainly the moisture it contains-might be further away from pH neutral than a mild white soap.
Even of you were to spray a screw with oven cleaner first (which is way more basic), it would still take more than that to dissolve the metal of an entire screw. Far more important considerations should be the moisture of an environment, electrochemical stressors, and the type/thickness of the fastener. And of course, time; here on Earth, we have an oxygen-rich atmosphere, so everything is in a slow burn of decomposition.
What was the music that was played during the steam iron PVC pipe and circling lawn mower segment? Please, artist and song with the woman’s high voice.
Stop saying self-tapping screws! There was not a single self tapping screw in this entire video.
Really that's your biggest problem in life?
nOT THE BIGEST. jUST THE ONE STARING ME IN THE FACE. lol
I got a self cleaning oven, waste of money, never cleaned itself once in all the time I’ve had it
Never use wire strippers I’m just very careful with wire cutters
Too many people conflate self tapping with self drilling.
Human ingenuity never ceases to amaze me. Seems as if part of the species is focused on creativity, beauty, and uplifting the conditions of our fellow man - while, sadly, many others are bent upon destroying , medicating and killing each other. Seems as though the species is a bit schizophrenic!
Home made code lock??? Not many homes I know of have a Lathe, Milling machine or an anodizing facility in them? or maybe my home is under equipt?
What key is made from magnetic material? They're almost always nickel or brass.
The channel is a drug, once you get into a video there is no going back
17:30 this specialist uses asbestos tiles for that ... really special
What are the title of music in the beginning of this video and in the end
5:41 What is that with the DeWalt charger?! A bit of Nikola Tesla going on there!
So what was the tip about the foundation?
outstanding
Something else people don't know what they are. Those are NOT self tapping screws! Those are regular wood screws.
Almost all keys are made from non-magnetic material. The main magnetic metals are Iron and Cobalt. No one makes keys out of Cobalt, and keys made out of Iron are bad because iron can rust away which is really bad for keys.
A fact I knew and for that reason why I knew people were lying when they demonstrated how the COVID vaccine made them by showing keys would stick to them. Nah. They were just nasty and in need of a shower.
Can anyone tell me...what is that sheet called that is used to make the brick shape stencil...? As shown in video
Looks like a sheet of foam board. You can get it just about anywhere craft materials are sold.
"nuts in hard to reach places" my brain translated to "Karens in Alaska"
I found a couple of zip-ties make a suitable weed-cutter blade replacement! 👍
I like ❤
2:40 - What kind of adhesive did he put on the bottle cap to stick it to the car, to remove the dent? He put something on the cap, stuck it to the car, then when he was finished pulling the dent out he sprayed something on the cap and it came right off.
that's what I want to know too
Yep, Ideas only work if you have the information to use them!
Is that asbestos roofing he’s using for foundations?
What's the name of the song that starts at the 7:40 mark? Shazam was no help!
Slow down the speed of this video please!
whtas the name of the song
Most if not all of these "Hacks" are actual products, hacks using cheap copies are not as good as getting the right tool for the job.
I'd love to see the suspended ceiling again just 18 more times
I loved that one, too!!!
Won’t shorting the drill battery to start the car battery cause thermal runaway and destroy it?
SOme of these are good tricks, but some are just junk. BTW I never heard of a Trowel called a Spatula before... I guess I can use my kitchen utensils as tools for painting now.
Hard to imagine the scenario where you need to strip wires yet do not own a wire stripper.
CZcams channel is the best school all over the world..
whats that song @8:13?
A bit harsh calling that lady a floor scrubber.
17:40 anyone else notice the asbestos sheets being used for the sides 😳
could have been dealt with safely , now noone will be able to take those out in a safe way
Don't lick them and you'll be fine
What IS a self tapping screw anyway?
..... asking for a friend.
Frustrating how often you don't show the actual idea that is in the intro picture.
It's really cool how far technology has come.
Bby uh
well...seems its all about NOT using "technology" :-) More like using one's noggin' in tuff spots :-)
@@antoniiocaluso1071 That's true
@@antoniiocaluso1071 yeah bby
@@antoniiocaluso1071Technology is more about making certain things easier to fix or manage.
8:28 self-tapping lawn mower
Impressione & incrible others 😮😮😮🎉🎉🎉🎊🎊🎊🥇🥇🥇🅰️🅰️🅰️
I am trying to do this type of content but failed everytime for reused issue. already lost monetized channel to test. If you can help me please ?
The corrugated sheet material looks like Asbestos to me!☠️☠️☠️☠️☠️
OMG yes, I just this post after writing a long one above you. I'm glad some sensible people around🙌
NICE. ALL screws are not self tapping though LMAO! 😆😆
dude has no ider about tech^^
Some of these are hilarious fails.....shrinking PVC tubing with a lighter......yeah hope its just air or non-high pressure crap. lol
While some of these are cool little tricks to get screws out and whatnot that don't really matter to anyone, but you personally, don't shrink a plumbing pipe with a lighter to make it fit, use the proper couplings. Doing it incorrectly is just asking for trouble. It is advice like that for why codes and regulations exists and most people should not be doing DIY.
Why does he keep calling them self tapping, they are just screws, self tapping have a built in drill bit to go into metal.
Replayed the first trick 1000 times and still can't figure out what he said to use for a concealed fastener?
Research the definition of "self tapping screw".
I'm so stupid. I've always used a premade wire stripper to strip wire. I feel like I'm the tool now.
❤❤👍🌴🌳🌲
13:11 I just slide it along my sink works 100% the same ... and i dont need no peace of plastic sitting around
everyone except us.
12:47 you gonne ruin your chain, bushings and sleeves are oiled or greased before assembly, if the chain is cleaned with alcohol or acetone, these oils or greases will wash out and the chain will rust from the inside, it is almost impossible to get oil back to these places do to too high viscosity
I like how the guy put his finger directly in front of the drill bit with dowel pin… yikes
15:47 Oh yes, I can make a home-made CODE lock with my metal lathe. I will have to spend $4000 on the metal lathe first!
No way *TZ* finally changed that obnoxious music theme
Now it's a different annoying loop that we will be tired of in a few days, but they will use it for the next 3 years.
@@ML-jk3sz I'll rather listen to this track than previous one
@@CerealKiller. for now...
@@ML-jk3sz theme is one thing but his "not point 1 inches etc." pisses me off to the bone (laughing hysterically)
@@CerealKiller. I agree, but its faster than saying zero. "nought" is what the word is but it can also be spelled "naught" or "nil".
There is self tapping, self-piercing, and others, but I did not see a single self-tapping screw.
"This won't work if the key is made of non-magnetic material" -- which is like 99% of all keys, so it's a waste of time. 😕
Half is good. Half is questionable at least (i am a construction worker for 25 years up until now).
Home made , because everyone has a lathe
The nasal commentary gets on my wick
love the videos but hate the music
haaaaa...how many ol' dudes have ALREADY done some of these?!! Good tips, for sure! Ouch...that old framer with the crazy-long beard is sure gonna regret it someday! Don't ask! :-)>>>
👍👍👍👍👍👍👍
9:22 is def Chinese! Only in China do they tighten counterclockwise!
It's NOT a ba-tree
It's a ba-TTery.
4:41 No??
Hindi Language Dubbed All Video
I'm not sure what's worse, these "tips" or the number of people who think they're good ideas.