E450 Class C RV 2"inch rear lift plus air bag repair
Vložit
- čas přidán 20. 05. 2023
- In this video we are going to repair a broken air ride bracket. Plus put 2"inch lift blocks in a 32 foot Class C RV. Thanks for checking out the video. You will need to find 3/4 pin lifting blocks.
This video is for entertainment purposes only.
Link to U bolts: I went with 5/8 X 4"inch axle tube 14"inches long
www.generalspringkc.com/u-bolts/
DISCLAIMER:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
By using some of the affiliate links above, I may receive a small commission, at no extra cost to you. This is the easiest way to support me and helps me continue making content like this for you. Thank you
Due to factors out of my control, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not me. Be safe! - Zábava
Hello Mitch, just catching up on some videos, You are the certified Jack Man! Happy independence day to you🪵👍🏼🇺🇸
Thanks 😁 for checking out the video. You two have great Independence day too 😁👍🍳🚜💨🍳
Jack Man sounds like a new Superhero!!!😂😜
Whew. I'm so far behind on seeing good content from great channels like yours! Great work and smart solutions!
Thanks Logan 😁👍 glad to hear from you. I appreciate the kind words. This took a lot of head scratching to get done😂Have a great weekend 🚜💨🍳
Row row row your boat...😂, Tunnel vision 😂, great video Mitch I guess we can say you're a Jack of all trades with all the jacks you used to re-align it 😉. Have a great Sunday 🌞👍🏻🙋🏼♂🍳☕
Thanks Luc 😁 I went a little off the rails on this one😂 I guess it doesn’t matter if in the end it works. You have a great Sunday too.😁👍🚜💨🍳🙋🏻♂️
Great video Mitch! I was just thinking I hadn't seen one from you in a while and apparently I'm slacking, lol. Vehicle repairs are not in my wheelhouse, so I'm very impressed with what you did. Hope it lasts till you can buy the new lift kit. 😁👍
Thanks Sam 😁 I am happy with the results. Your channel is doing great. Your barn will be a lot cozier this winter 🥶 with the new wall you are putting up. Thanks for checking out my video. 🚜💨🍳
Hey Mitch, Your perseverance is amazing! I would have given up at the first sign of trouble! Excellent repair. But because both sides of that bracket were either broken or cracked I would say it wasn't engineered correctly. What do you think? Nice job making the video! Cheers!
Thanks Mike probably should have given up😂it all worked out. I would have to agree with you. I think the bends weakened the already thin steel plate. Thanks for checking out the video 😁👍🚜💨🍳
Those wheel dolleys are a cool tool. I am surprised that bracket broke, it looked like a thick bit of steel. We find that it can make a problem seem worse when it is being recorded and things don't go well
Thanks for checking out the video Joseph 😁I was not thinking just doing😂 at least it all worked out. Have a great week 😁👍🚜💨🍳
I think you could've fixed the air bag bracket with ramen noodles and epoxy....... JK😆
Good job on the fix!
I think the ramen 🍜 noodles is a real thing and if I was selling it a great option😂Thanks JD😁👍🚜💨🍳
Inside storage and keeping out of salt is making the underneath look rust free. You should see mine from driving in salt and parking on grass :(
Morning B Hall😁 our first year it was outside on the grass too. Inside is nice to be able to work on also. When we went to the San Francisco to visit family we ran into a lot of snow up in the mountains. I don’t know if they use sand and salt but we did gain some rust from that trip. Thanks for checking out the video Have a great day. 😁👍🚜💨🍳
Nice work Mitch. Did you have to make the same weld repair to the other side?
Thanks Chris 😁 No the other side was fine I just put in the lift block. Did not want to show both sides in of repetition. Have a great Sunday. 😁👍🚜💨🍳
I mentioned your channel in the top 5 tractor mods challenge that has been going around CZcams lately. It would be cool if you could participate.
Hope your doing well since nothing new has come out for awhile.
Thanks for mentioning us😁Unfortunately I am injured at the moment waiting for insurance to ok my surgery. I will have to put something together after I heal. Have a good one 😁👍🚜💨🍳
@@MJADoingStuff Get well soon Mitch.
@@ticklemeorange8328 Thanks My Surgery is on Tuesday 8/22 wish me luck 🍀 😁👍🚜💨🍳
Yikes. I am wondering about those springs. They looked kind of flat. Maybe even overbent / stressed ?? Camera angle? Do they make the camper lean or do they squeak at all when your travelling? What, me worry? HA. 🤠
I feel like they are wore out but I was just trying to get clearance for the tow hitch and automatic levelers. I use the camper to tow the tractor to the property and it works way better now. No squeaks but has a lean to the passenger side. I am saving up for a custom set of springs in the future. Thanks for checking out the video. 😁👍🚜💨🍳
Do you plan on installing the weldtec lift yourself when you get it?
I'm looking into one also but don't want to pay the 3500 for installation.
@@neptunepoolsserviceandrepa2529 Yes of course I will install it myself but still saving up the funds. So far the 2” inches is working out for me. Thanks for watching 😁👍🚜💨☀️
Good video sir, we would like to invite you to do a review video for our Auto LEDs. Are you open to doing this kind of stuff. We have reached out to you via email for inquiring an opportunity
Sounds good 😁I will check it out.
@@MJADoingStuff thank you, looking forward to figuring out what what we can do.
What the heck is a 2 inch inch lift?
I guess you didn’t watch the video. 😁 It’s just a 2”inch block of metal in between the leaf springs and axle to raise the static height of the vehicle. Let me know if that helps. Have a great week😁👍🚜💨🍳
@@MJADoingStuff lol, I mean 2"=Two Inch whereas 2"inch=Two Inch Inch... The department of redundancy department has struck again...
@@Warrentheo 😂👍
Air bags are shit new heavy duty springs made by a company that makes springs they are cheap you’re going to brake your chassis put springs on mine now drives like a car
Yep I totally agree it’s on my list. Thanks for watching 😁👍🚜💨☀️