Thank you very much my friend, you have made a much better brogram than blynk, I love cadio, I have been trying to connect to blynk for 7 days and I connected to cadio in 10 minutes, I am very happy.
There should be options of using it via BLE/Bluetooth classic on esp32 as it could come handy for those who uses mobile data or don't have a wifi connection .
@@cadioHomeAutomation it would be helpful as most of the app like rainmaker , blynk etc lacks this feature .. and it not that hard to implement . Looking forward to test this .
I would really like you to detail or make a video with this same system… the same… but that it had manual pushbuttons too… please, can you make a video?
Please give a tutorial on how to use esp32 and esp8266 with ardino serial, how does it work, what are the things needed, if you add esp32 16 relays, it becomes very slow and causes many problems, so you should take this approach. I would be very helpful if you should pretend to be a video
Hi is it possible to control that circuit anywhere in a spcific country? or your smartphone and that project must be connected on the same router to work?
Thank you for the video. I was able to connect my e s p thirty 22 the app but wanted to change the pin out. I thought I would have to reformat the unit and then put it into configuration mode. Now I can't get it into configuration mode. Any help would be appreciated. 1. Could I have changed the pen out without reformating the unit? 2. No but I have reported that the unit how can I get it into configuration mode?
Can we add one more esp. suppose i want to automate another set of lights situated far away from these set of lights wiring then with this esp and its gpio is costly so can we use another esp for them and merge both the esp devices to come in the app
Please check the flash download setting and make sure it's exactly as the photo in this link: egycad.com/cadio/docs/firmware/esp32-firmware/ Also check the table in this link and make sure you are selecting safe GPIOs, so the esp can boot normally: randomnerdtutorials.com/esp32-pinout-reference-gpios/
We recommend use an ESP with at least 2MB flash size, ESP-01 will works, but we can't grante stability and performance, so we recommend using ESP-12 instead.
After creating the info file, the app will ask you if you want to sava a copy of the info file on your phone, choose (yes) and enter the file name and it will be saved in (/downloads/cadio) folder. Then you can use (import) option to import the info file for the other units.
You can! but in this case you will use GPIOs that (high at boot), and this is not the best experience when we talk about home appliances, so in this case we recommend using esp32 instead!
To get more IOs, You can add an external MCU, like atmega328 for example, and using CadioSerial arduino library, you will be able to write your own code and communicate with the esp using the library API. egycad.com/cadio/docs/CadioSerial-library/
The esp is connected to the internet and you can control it from anywhere. Only while configuring the esp you need to connect the smartphone to the esp wifi network.
Glad you liked it❤️ To add multiple units, just repeat what you did for the first unit for the second, third etc.. Everything will be automatically handled.
Thank you very much my friend, you have made a much better brogram than blynk, I love cadio, I have been trying to connect to blynk for 7 days and I connected to cadio in 10 minutes, I am very happy.
There should be options of using it via BLE/Bluetooth classic on esp32 as it could come handy for those who uses mobile data or don't have a wifi connection .
Thank you! This will be taken into consideration during the discussion of future developments.
@@cadioHomeAutomation it would be helpful as most of the app like rainmaker , blynk etc lacks this feature .. and it not that hard to implement . Looking forward to test this .
Hello SIr! That's so great video. Can I showing the status relay like ON/OFF in the LCD I2C? Thanks for the help!
Kindly post video example for 21 device with CadioSerial Library
thanks
And thanks for this content
I would really like you to detail or make a video with this same system… the same… but that it had manual pushbuttons too… please, can you make a video?
Love from india💖❣️
Thank you! You are welcome ❤️
Please give a tutorial on how to use esp32 and esp8266 with ardino serial, how does it work, what are the things needed, if you add esp32 16 relays, it becomes very slow and causes many problems, so you should take this approach. I would be very helpful if you should pretend to be a video
Please share how to save two wi-fi network passwords
Hi is it possible to control that circuit anywhere in a spcific country? or your smartphone and that project must be connected on the same router to work?
Nah anywhere in the world as it works on internet
can you make video how to connect 16 relays ?
Thank you for the video. I was able to connect my e s p thirty 22 the app but wanted to change the pin out. I thought I would have to reformat the unit and then put it into configuration mode. Now I can't get it into configuration mode.
Any help would be appreciated.
1. Could I have changed the pen out without reformating the unit?
2. No but I have reported that the unit how can I get it into configuration mode?
hi sir! Can i add ACS712 current sensor in my ESP8266?
Thanks 🙏
A relay Module is Not completely turning off not working properly how to fix it
how to use multiple loads with esp32?
Pricing for manufacturers? can't find pricing details on your website
Can we extend the number of gpio pin of esp 32 if we can so please make a video on it 🙏🙏🙏🙏
Is cadio support automatic water tank controller?
How to config on/off momentary ?
I'm using Shift Resistor For Input And output. How to configuration esp32
Sir the problem to connect 6 realy with 6 manual swich to control drivice please upload one vedio
It will be better to use ESP32 in this case, I will make a video about it soon
@@cadioHomeAutomation Can u pls make a video of ESp8266 manual switches
How can i connect manual switch for these lights/relays
In the info file devices table, you can select the switches GPIOs
When i pay 7.99$, i can use for how mack esp connected?
Can this app control multiple smartphones on one board?
Can we add one more esp. suppose i want to automate another set of lights situated far away from these set of lights wiring then with this esp and its gpio is costly so can we use another esp for them and merge both the esp devices to come in the app
You can add an unlimited number of units (ESPs) to the account and they will appear in CADIO app in the same Interface.
Sir , it was not download in esp8266 it shows directly finish but my esp8266 is support 9666mh and flesher shows 11000mh
Make sure to activate the checkbox beside the firmware file path
Can I use 10 esp01 rather than using 1 esp8266
for the relay source, is it possible to use a USB cable? is G is neutral and Vcc is Positive?
Yes of course, just make sure you are using 5v coil relay/module.
I am using a 1 channel 5V DC relay
@@clasvixawn9676 perfect!
@@cadioHomeAutomation Thank You You are my savior
Can't yet 🙏😓
Can I set mini Arduino oled display for temp and humidity show?
Not supported yet!
Is it possible to see the uploaded program code that the AI builds?
Unfortunately not available yet
Esp8226 is working but esp 32 doesn't working after confrigation the device doesn't show on dashboard
Please check the flash download setting and make sure it's exactly as the photo in this link:
egycad.com/cadio/docs/firmware/esp32-firmware/
Also check the table in this link and make sure you are selecting safe GPIOs, so the esp can boot normally:
randomnerdtutorials.com/esp32-pinout-reference-gpios/
Please share article for
ESP32-8channel relays how to connect with gpio pins
Great platform can we use esp01 ?
We recommend use an ESP with at least 2MB flash size, ESP-01 will works, but we can't grante stability and performance, so we recommend using ESP-12 instead.
Sir can we make it work in offline mode without internet, not switches ,directly from mobile
It can works offline if the router wifi network has no internet connection
@@cadioHomeAutomation thanks for the info
Hi sir, how to share configuration settings on cadio app to other devices? so that other devices do not need to set the configuration
After creating the info file, the app will ask you if you want to sava a copy of the info file on your phone, choose (yes) and enter the file name and it will be saved in (/downloads/cadio) folder.
Then you can use (import) option to import the info file for the other units.
How to import config to other units? does the new device have to be connected to the same wifi as the cadio device?
Please _how to next code upload on esp32-esp8266 with cadio firmware
Reply me
Simply Erase the firmware
@@cadioHomeAutomation I have no idea to erase the firmware please make video on erase firmware reply me sir
@@Yadav_Minitech czcams.com/video/kMnF9vqDa1k/video.html
Can we use 8 relays module instead of 6 relays with esp8266 and cadio?
You can! but in this case you will use GPIOs that (high at boot), and this is not the best experience when we talk about home appliances, so in this case we recommend using esp32 instead!
What is configuration password? I can't find
Btw how to purchase pro version it's not showing in app
Kindly check this video at 09:00
czcams.com/video/h4RS7SxAisI/video.html
@@cadioHomeAutomation thnx
Is it possible to run a servo motor using Cadio?
Unfortunately not natively supported yet
Manual control add
Is possible use a PCF8575?
To get more IOs, You can add an external MCU, like atmega328 for example, and using CadioSerial arduino library, you will be able to write your own code and communicate with the esp using the library API.
egycad.com/cadio/docs/CadioSerial-library/
@@cadioHomeAutomation Very interesting, but so very expansive for only add more I/Os.
Cadio can connect with lcd 16x2?
Unfortunately not supported yet
I will complete the ESP 32 Program but the device not showing in the cadio app please help
What is the wifi indicator LED status?
Blue led always on condition
Make sure the esp connect to the router and not filtered
ESP 32 connect in wifi but is not visible in APP HOME page
Yes same problem occurred
How can I add a physical switch
Select their GPIOs In the info file devices table
@@cadioHomeAutomation Thank you❤️. Can you make a video about it, or can you give me a way to contact you?
could I install CADIO firmware using Android Smartphone???
This firmware work to 4 or 8 channel relay too???
Yes you can build unit with any architecture you want
@@cadioHomeAutomation thanks, greetings from Indonesia🇮🇩🇮🇩🇮🇩🙏🙏🙏
@@v_3farmaviary870 You are welcome! 😍😍
is the esp8266 connected to the internet or is our smartphone connected to the esp8266?
The esp is connected to the internet and you can control it from anywhere.
Only while configuring the esp you need to connect the smartphone to the esp wifi network.
@@cadioHomeAutomation Thank you, very helpful
Show, tem firmware para esp01
Currently, CADIO need MCU With at least 2MB flash size.
What is cost of permanent license?
$7.99
@@cadioHomeAutomation thankyou♥️
My home Bangladesh I love your video 🙏please make video ESP8266 2 piece & single CADIO apps please make video🙏🙏😥😭😭😭
Glad you liked it❤️
To add multiple units, just repeat what you did for the first unit for the second, third etc.. Everything will be automatically handled.
Is cadio cloudbased?
Yes
Is CADIO open source?
No
@@cadioHomeAutomation 😔