I hope you see this message! I am a 58 year old grandmother and I ordered the part and did it myself thanks to your video. I did it in under 15 minutes. Thank you so much for all your awesome videos 😊👍❤️!
i dont mean to be so off topic but does any of you know of a tool to get back into an Instagram account? I was dumb forgot my login password. I love any help you can give me
Can faulty solenoid and any leak in line going back to canister cause starting issues in morning and poor fuel consumption? There is No misfire, very smooth acceleration.. idle little rough at 700rpm with Ac on.
Hi Any videos on changing a purge valve on a Saab Aero 9-3 V6 2.8 Turbo? Or do you know the location of the Purge Valve on a V6 2.8T saab? Thank you and nice video
Can i blow air into the hose you removed from the right side of the part. Something clogged in my saab and when i take it to the gas station, i can only pump so much gas into the car...
Great video. I have a question. Will this valve cause a misfire code? And an unrelated issue. My key fob will work fine then a month later it stops unlocking my doors and trunk; when I unhook the battery and reconnect the cable it works fine for a month then stops working again. What could cause that? 03 9-3 2.0
the purge valve is unlikely to cause a misfire, you might want to check the plugs, coil packs, and/or valves/cylinder compression. On the key issue, you might want to try taking out the battery cleaning the contacts with a light drop of alcohol, letting it dry, reassembling and see what happens. Also might be a weak battery. Not all batteries out of the box are fully charged. Also I would only use a name brand Energizer cr2032 battery. it's not worth the cost savings to use a cheap no-name battery.
Would you possibly tell me what to look for with a p2187 code on my 2007 Saab 9-3 2.8. (system too lean bank #1) maybe a common part or hose I could look out for?
I know this is an old comment , do you remember what it was? Have the same cold , my process is going to be cleaning MAF sensor, if not then replace the purge valve and if not get a whole new maf
I'm having some no start issues after I've filled the tank for the first time. Starting t question this after swapping 4 different ecu's for what I'm starting to think was no reason..lol car has always run rough and choppy for few seconds on cold starts. And would even smoke a little bit. 10seconds later car ran great. You mentioned in the video that the car sounded terrible when starting. Would you say symptoms are similar to mine? Seriously sounded like the car has an aggresive Cam shaft in it for a few seconds, but only after its sat for a few hours or so and first started. After running for a bit it ran fine...
I believe that is part #12611801 and that one is located in the rear of the engine instead of in the front. See part #8 in this diagram www.esaabparts.com/static/images/diagrams/106729.jpg
Depends what reference you look for. If you seek part number 1997278 you will find much better price at least i europe. The part number showed by the autor is much moren expensive here but I believe they are the same with different part number.
I hope you see this message! I am a 58 year old grandmother and I ordered the part and did it myself thanks to your video. I did it in under 15 minutes. Thank you so much for all your awesome videos 😊👍❤️!
Congratulations, job well done! 🎉
The video was point. I had the same problem. You are the best.❤️❤️❤️❤️❤️❤️👍👍👍👍👍👍👍
Thanks, swapped mine out tonight using this guide for just $20! Huge help.
Thank you so much for this video😊. I love repairing my own car when I can it saves me so much money. This was a very simple fix.
Wish I'd seen this before I broke the $120 line that goes off to the left. Thanks!
i dont mean to be so off topic but does any of you know of a tool to get back into an Instagram account?
I was dumb forgot my login password. I love any help you can give me
@Matthias Damon instablaster :)
avoid all plastic on these old cars. My pcv valve broke on me.
Can faulty solenoid and any leak in line going back to canister cause starting issues in morning and poor fuel consumption? There is No misfire, very smooth acceleration.. idle little rough at 700rpm with Ac on.
Thank you sir this video is very much appreciated
Changed all vacuum pipes to silicone ones today - car is 2005 Aero 2.0 litre - unfortunately original valve output snapped / part only £30 in Uk
Did it run any differently? You never started the car. Mine sounds like garbage sometimes too. Chugga chugga chugga
Hi Any videos on changing a purge valve on a Saab Aero 9-3 V6 2.8 Turbo? Or do you know the location of the Purge Valve on a V6 2.8T saab? Thank you and nice video
That one is on the intake manifold between the engine and the firewall.
could you do a video for a 2003 model? I have a SE 93 2003 Convertable and I cant find the vapor canister purge valve for the life of me
hi man, just a quick question. Could this valve be giving me a lean condition (very erratic) P0171?
I sometimes hear the hissing sound as described
Can i blow air into the hose you removed from the right side of the part. Something clogged in my saab and when i take it to the gas station, i can only pump so much gas into the car...
I have the code p0446 you mentioned. Switch this purge valve with the same ac Delco part still no dice got the code still. Any advice ??
Great video. I have a question. Will this valve cause a misfire code? And an unrelated issue. My key fob will work fine then a month later it stops unlocking my doors and trunk; when I unhook the battery and reconnect the cable it works fine for a month then stops working again. What could cause that? 03 9-3 2.0
the purge valve is unlikely to cause a misfire, you might want to check the plugs, coil packs, and/or valves/cylinder compression.
On the key issue, you might want to try taking out the battery cleaning the contacts with a light drop of alcohol, letting it dry, reassembling and see what happens. Also might be a weak battery. Not all batteries out of the box are fully charged. Also I would only use a name brand Energizer cr2032 battery. it's not worth the cost savings to use a cheap no-name battery.
Great video! I also have the 2006 Saab 9-3 and amazon keeps saying this part does not fit my vehicle. Has anyone else has gotten this message?
Yes I have seen that too.
still says it
Why tf are you buying saab parts off amazon
Thank you
Poor lighting, can't see exactly what was actually disconnected.
Do you have any thoughts about the warm restart stumbles that seem to plague every 93 across the world?
Bad valve. Do pressure test.
Would you possibly tell me what to look for with a p2187 code on my 2007 Saab 9-3 2.8. (system too lean bank #1) maybe a common part or hose I could look out for?
I know this is an old comment , do you remember what it was? Have the same cold , my process is going to be cleaning MAF sensor, if not then replace the purge valve and if not get a whole new maf
@@noahfield5171 any updates on what fixed your issue? I started to get the same thing on mine.
Can this problem cause a misfire when hitting full boost? Got a p0455 code
no
hello can you send me a link for part i have not been able to find
Link is in the description, cheers!
I got code p0442 not 41 or 43. Do you think it’s the same problem?
Quite, possibly, though I would also recommend checking your gas cap and other evap lines too before buying this part.
I'm having some no start issues after I've filled the tank for the first time. Starting t question this after swapping 4 different ecu's for what I'm starting to think was no reason..lol car has always run rough and choppy for few seconds on cold starts. And would even smoke a little bit. 10seconds later car ran great. You mentioned in the video that the car sounded terrible when starting. Would you say symptoms are similar to mine? Seriously sounded like the car has an aggresive Cam shaft in it for a few seconds, but only after its sat for a few hours or so and first started. After running for a bit it ran fine...
@@steviefresh4602 pcv
you didn't put the vacuum pipe back !!
$317 repair on my viggen but part is $165-200.
You paid that much for that part?? thats a scam if I read this right
Is this part the same for 2.8 v6?
I believe that is part #12611801 and that one is located in the rear of the engine instead of in the front. See part #8 in this diagram www.esaabparts.com/static/images/diagrams/106729.jpg
@@OnTheWorkbench Please help with 2.8L 9-5 Saab 2011. Per your diagram, any suggestions on replacing that EVAP? Very tight there...thanks.
It ain't a cheap $30 part. New they are $200+ and used are $40+
Damn where at? I got mine at autozone special order got to their store in two days for about 40 bucks or less.
Depends what reference you look for. If you seek part number 1997278 you will find much better price at least i europe. The part number showed by the autor is much moren expensive here but I believe they are the same with different part number.
I found this video just at the right time. Thanks.👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
thanks!