How to Replace Window Regulator 2001-2005 Ford Explorer Sport Trac
Vložit
- čas přidán 25. 08. 2024
- Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ib/1AWR...
This video shows you how to install a window regulator on your 2001-2005 Ford Explorer Sport Trac. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
This process should be similar on the following vehicles:
2001 Ford Explorer Sport Trac
2002 Ford Explorer Sport Trac
2003 Ford Explorer Sport Trac
2004 Ford Explorer Sport Trac
2005 Ford Explorer Sport Trac
Tools you will need:
• Phillips Head Screwdriver 1aau.to/odF/1AX...
• Pocket Screwdriver
• 10mm Wrench 1aau.to/oaC/1AX...
• 10mm Socket 1aau.to/ocL/1AX...
• 11mm Socket 1aau.to/odk/1AX...
• 5.5mm Socket
• 6mm Socket 1aau.to/ocL/1AX...
• 7mm Socket 1aau.to/ocL/1AX...
• Cutoff Wheel 1aau.to/ob/1AXA...
• Trim Tool Set 1aau.to/oaV/1AX...
• Drill
• Gloves 1aau.to/oH/1AXS...
• Painter's Tape
• Safety Glasses 1aau.to/oE/1AXA...
• Center Punch 1aau.to/oB/1AXA...
• Hammer 1aau.to/oar/1AX...
Subscribe: / @trq
Check out our playlist:
Ford Explorer Sport Trac 1st Generation 2001-2005: • Ford Explorer Sport Tr...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Wedge a piece of wood behind the Window Regulator Track, next to the Rivet you want to Drill out. Then use a small center punch to knock the Steel Center of the Rivet out (it will pop right out, leaving only the soft Aluminum outside). It will then be very easy to drill out the Aluminum Rivets with a 5/16 Drill Bit. Do the same to each of the Rivets. Making sure to wedge a piece of wood, between the back of the Track and the Outside Door Body, before hitting on the punch. I then install 4/4" Bolts with Nuts & Lock Washer, where the Rivets were. Same thing if the Winder Motor frame is Riveted in place (as on the 88-97 Model Explorer & Rangers).
One of the best tutorials I've seen on Utube, yet!
Thank you for an awesome video! You took the guest work out of it
Thank you for posting this.
Telling us what you're taking out takes the guess work out of which bits we need. Youve made my life easier🥲
what kind of screws and bolts you use to replace the rivets ( size )
Awesome video 👍
I'm going to try it. I feel confident after watching this.
I'm surprised that the blue painter's tape held up the glass. I used DUCK brand gorilla tape.
Good video, nicely explained, good job.
I'm jealous. Sounds like you have an air-powered drill.
Rivets Ford? Really?
What if the window is stuck in the bottom position
Really great video. What length and size are the nuts and bolts used to replace the the rivet drilled out.
What do you do if the whole window is stuck down?
What if the regulator motor is dead and can't roll the window up to get to the ribbits ? Do I just muscle it up?
Trying to decide if I should do this or pay for it. 3 min in. Looking for my wallet. Thanks for the video