Abrams X - the next generation of badass! part 1
Vložit
- čas přidán 25. 08. 2024
- This time Abrams X, which is not a prototype of the next generation of the abrams tank, but a technology demonstrator. The new solutions will undoubtedly be used in the construction of the tank of the future, as well as in subsequent versions of the conventional M1 Abrams.
The unmanned turret is equipped with a 120 mm XM360 smoothbore cannon, powered by an automatic loader. In addition to super armor, the safety of the Abrams X is enhanced by the Trophy active vehicle protection system and laser radiation and the launch of anti-tank guided missiles warning system.
The tank also has new digital imaging systems, as well as a new fire control system. There is a remotely controlled Kongsberg Protector RS6 weapons module with a 30 mm M230 automatic cannon, enabling the destruction of unmanned aerial vehicles.
The crew is located in an armored capsule in the hull and it was reduced from 4 to 3 soldiers. The Abrams X uses a hybrid power unit - combustion engine and electric motor. In addition, the tank has a hydropenumatic suspension.
The model released by Amusing Hobby is a great product for a quick project for a few evenings and the opportunity to use your own ideas for painting and weathering. For me, this is another project, next to KF51, that powers a number of my models that represent prototypes. This series show my modifications and ideas used to turn this kit into interesing piece of modelling stuff! I can say that this is the next generation of badass!
www.modellersw...
⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️
Support my work and be my Patreon - / coldemonspl
DON'T CLICK THIS! - tiny.pl/9g5bb
Instagram: coldemonspl
coldemons.blogs...
I really like how you customise your builds. Very inspirational. looking forward to the painting stage.
Thank you very much mate! I highly recommend you to join the Patreon to see more, exclusive to the Patreons :)
Looking good so far
Thank you very much buddy! :)
Another great master class in great modelling,with great tips too, well done coldemonspl 👍👍👍👍
Thx a lot mate! :)
Yeah! New episode!
Many thanks! :)
Excellent work as always!
thx :)
I totally dig how you give us the mil size of your drill bits used.... MASSIVE help thank you, as I really never know how small these bloody holes should be when drilling.
No problem! Thank you very much! :)
Hi Lukasz,another stunning build from you ,I have this coming for Christmas . I have a plan on my camo scheme. Looking forward to seeing how you do yours.
Thank you very much mate! I highly recommend you to join the Patreon to see more, exclusive to the Patreons :)
You’ve made some interesting changes and additions to this build ✨👍✨
Thank you very much buddy! :)
That's the beauty working on let's say prototypes 😁😁😁 you can do whatever you like and pretty much no one will complain about. Currently I'm working on Tiger Model(4628) Leopard 2 Revolution so your video gave me a few ideas. Have fun with your,Łukasz 👍👍👍👍😃
Many thx Paweł! Zapraszam na Patreona - Polaków jest zadecydowanie za mało! :)
@@coldemonspl Dziękuję za zaproszenie,na pewno po nowym roku nie omieszkam dołączyć. Zastanawiałem się czy nie wrócić na Flory forum ale tutaj wydaje się bardziej interesująco. Pozdrawiam i wesołych świąt 🥳🎄🎁
Sweet ! 😎
Thx a lot mate! :)
Very interesting model. This is what the tank force will look like in the future.👍
Thx a lot mate! :)
Hi Lukasz, that certainly is a 'space age' looking Abrams, but it is carrying on the tradition of one of the best MBT, so this tanksvwill be no exception, looking forwarc to the next update, best regards from Australia 👌👍👌👍👌👍
Many thanks! :)
to modern for me but really nice Model and Detailwork
Thx a lot mate! :)
nice one
Many thanks! :)
Beautiful work as always.
Thank you very much buddy! :)
Out standing work as normal I really like the way you put across your modelling skill, I have only been modelling for two years now and I have learnt so much from your videos, keep up the great work.
Thank you very much mate! I highly recommend you to join the Patreon to see more, exclusive to the Patreons :)
Gonna be the debbie downer...you gotta take off the antennas on the rear hull. That's never gonna happen. Tanks are constantly moving, when it's time to refuel, a tank will swing it's turret to its rear( US abrams) to make it easier to refuel. Those antennas would snap of. Why? Because they don't bend. The base has a spring. So they can be pulled down and always at an angle. As a fellow crewman of modern armored vehicles in the U.S. military. Antennas have to be in an area where crew can easily the them down or remove them. Yes. It looks cool, but it wouldn't happen.
You're right - it looks very nice but I will check the new place on the turret to make it exactly as you said! Many thx for this! :) Will, it would be very nice to see you in my Patreons group! :)
looks really interesting 👏👍🙂
Thank you very much! :)
Super jazzed to see this and I just ordered the model off Ebay.
Thank you very much buddy! :)
Hello my friend. A very nice tank and i can´t wait to become my preorder box. Hope of many more next gen tanks. I´m excited about the painting and aging.
Thank you very much buddy! :)
It looks great ! Thanks for your work :)
Thank you very much mate! I highly recommend you to join the Patreon to see more, exclusive to the Patreons :)
It was a product that I was going to buy later, but it helped me
Thank you very much buddy! :)
Cool
Thx a lot mate! :)
Pięknie!
Dzięki! :)
maybe EMBT one day 😍😍😍😍
Maybe :)
They used to include workable suspension
There is always some option to make it :)
Modern armour is a subject I would rather drop out for earlier Tanks,such as ww2.However,something like this could be interesting in some form of what if I guess.Anyways,Looks great my friend!
Thank you very much! :)
Super odcinek👍dzieki.
Dzięki! :)
👍👍👍
Many thanks! :)
i need to get that tool you use to bend the handles
It is very usefull! :) Thank you very much! :)
This looks a good model if you are into modern tanks. Are the wheel rims supposed to be the tyres so it makes it easier to paint them?
Yeah, we can say something like this about rims. Thx! :)
Nice build and subject! I have ordered mine online. Please can you give me the master part numbers for the antenna/ communication masts please?
It ia GM-35-017 - this one from the back. :)
Wow, that's some space ship not a tank! 😁
Thank you very much buddy! :)
Do you know if anyone has done an rc conversion on this Abrams X kit yet?
Have no idea. :)
@@coldemonspl thanks.
...a jak wymiary w porównaniu np z m1a2? Miałeś okazję porównać??
Nie miałem szansy na porównanie. :)
Hello mister cold. I have got a question to you.i have an tamiya abrams 1a2 iraqi freedom in my stash.the question is:are the track measures the same as abrams x.so i could use the rubber tracks included in abrams1a2 kit at an abrams x.with sticky greetings. Christian
They should be the same. I dont have this kit from Tamiya and can't say it with 100%. :)
Thank you mr.cold.
The track lengths are the same but the tracks are actually not. AbramsX uses a newer Diehl track.
The M1A2 track should fit, but it wouldn't be accurate.
👍👍👍👍👍
Thx :)