Messy furgution tractor iam ubserving science 40 years my age is 60 now your technicaly day by day up dating also even manufacturing place also ubserving many many tractor also stored near manufacturing place also thanking your team work thanking you kéepit updated
This is a great conception!!! More traction and floatation, but a little but!!! Use a "U joint" on it's linkeage for better turn control and differential pivoting. Love it.!!! It's a real easy add on improvement.
Plow set would never work in our ground No Coulter’s to cut the sod ! No weed hooks to lay the riye down in the furrow 1 As other people have said plows are not adjusted right We used a Ford 9n from 1939 to 1953 with dual tire on land side for plowing tires loaded with calcium solution Put duals on both sides for fitting
Ja sa mojim IMT 577 duplakom teram 3 brazde i ne oznoji se traktor. A u jesen vucem stajnjak u 2 zmajevke, vršne prikolice, ma ne bih ga dao za nista. 22 god je kod mene. Samo gas, vatra.
I agree that the back of the plough wasn't as deep as the front - the top link needed to be screwed out. Trouble is, in lift postion the rear of the plough wasn't lifting high enough for that. Presumably the linkage wasn't designed to take that much weight? A couple of assister rams would help - that's what I did with my tandem Nuffield 10-60s.
*That MF35 doesn't have enaugh Power to pull 4 Furrow Plows, the mod that you did gives it good traction but doesn't give it more power in fact with more moving parts you actually loose power to parasitic loads like driving extra cogs for the back end of the tractor, Also the PTO is a parasitic Load!!!*
*The knock off IMT533 is notorious for having an awful IMT 3 cylinder engine that performs poorly and it's prone to stuttering!* *These tractors were designed to run on a 4 cylinder continental engine with at least 45.5HP and the IMT533 is underpowered with only 32(plus the issues I mentioned above)* _-Peace_
@@AutodidactEngineer It wasn't that good or reliable. But it was affordable in the Balkan region, so every village had atleast one of 533/539 imt's. Overall it wasn't that good of a tractor. With some time tractors like imt 577 (4 cyl, 77hp) and torpedo td9006(6 cyl, 90hp with deutz licence) became "balkan workhorses"
Pro: it does provide about 30 to 40 % more traction, (with loss due to moving parts drag. i.e.: gears, pto, friction, etc) but it's also compacting the ground more by inclined tires rather than side by side duals...
Soy agricultor poseo un Forson Major en buen estado ,esta modalidad para el 35 parese muy buena en rendimiento al aumentar la adherencia al suelo por el mismo surco o trocha de trabajo de este modo considero resistencia y proteccion en ambas trasmiciones pero sufrimiento al motor. Me gustaria en ese caso usar 4 ruedas 10×28 y solo 3 rejas en el arado ,me gusta mucho el tema de los tractores
What about the way the front drive wheel came off the ground as he turned in ! No provision made for articulation. I would imagine all sorts of cracks and potential breakage after serious use.
Looks really cool and as the owner of a 35X I love the project. However I can’t help agreeing with the comments about diluting the power. Unless you need to add traction for difficult terrain there is no real advantage with a longer drive train. Am I missing something?
Před 3 lety+1
You don't, that tractor misses turn radius, lots of it.
Dad had two John Deere 730 diesels coupled together with an elaborate hinge between them so that it would articulate like the 4X4 of today. Pulled 6 bottom plow. You drove from the seat of the rear tractor. also controls on rear.
This setup seems totally wrong to me.. You place 4 furrow behind it but have the same hp that is for 2 furrow but you add another rear end to it that is making it work even harder? Seems like its backwards
Hmm few people understand engine loading... If the engine is stock hp etc. This set up is overloading the engine, pto and transmission for longterm durability. If this was done for "fun" then that another thing. But this isn't my tractor or money spent. I personally spend efforts on lower parasitic drag and longer life.
This rig only makes sense in the context of plowing with a four bottom. It really has no other use on earth. By the time that 35 was out, there were much better plowing tractors available. A 35 wasn't very powerful and was too light really to be a 4 bottom tractor anyway. This seams like a whole lotta trouble to go to when you could just get a bigger tractor or a smaller plow. Hell, you could use a Farmall M and get better results.
*Чудова ідея для покращення тягових властивостей трактора! В нас такий енергомодуль розробили для тракторів МТЗ-82 )))* *Відеоогляд китайського Massey Ferguson 6713* czcams.com/video/JyfQM9xOFZQ/video.html
Don't really see the point of this tractor, I'd rather have changed out the front axle and made it four wheel drive that way and still have the use of the draft control which is clearly not functional on this tractor highlighted by a poor operator who can't control the depth of the plough very well.
Watching these machines work is like seeing a well-choreographed dance.
My grandad had an 35 massey when i was a child its how i learnt to drive,its always been my favourite tractor
Messy furgution tractor iam ubserving science 40 years my age is 60 now your technicaly day by day up dating also even manufacturing place also ubserving many many tractor also stored near manufacturing place also thanking your team work thanking you kéepit updated
Muito.bacana
We Indians have same model named 1035 Di in 36 Hp Range...Nice video Sir
Massey ferguson is very long life tractor, easy in driving, i have m. F. 35 tractor! I m very happy to my tractor! F;-Rajsthan 🇮🇳
This is a great conception!!! More traction and floatation, but a little but!!! Use a "U joint" on it's linkeage for better turn control and differential pivoting. Love it.!!! It's a real easy add on improvement.
2Fą
@@janszostak1162 ofnbbbgbvObbb2zs2s4s xeeerr sxseesssxeesxrs3e ssxsxrasseesxsess ee serserisiz side-effects gsesss4e3essssssesddeseszesseeesereseeddeseesseeexsseeeeeeseeesddexes3xexe3xresdesrxs gsesss4e3essssssesddeseszesseeesereseeddeseesseeexsseeeeeeseeesddexes3xexe3xresdesrxseesrexseesfxrsrresrss exssedssessssrssdesesesdesde4eedededssdesrddx 4xzx c
My father had a 50. Great machine. It was a pure Joy to drive It.
Plow set would never work in our ground
No Coulter’s to cut the sod !
No weed hooks to lay the riye down in the furrow 1
As other people have said plows are not adjusted right
We used a Ford 9n from 1939 to 1953 with dual tire on land side for plowing tires loaded with calcium solution
Put duals on both sides for fitting
Ja sa mojim IMT 577 duplakom teram 3 brazde i ne oznoji se traktor. A u jesen vucem stajnjak u 2 zmajevke, vršne prikolice, ma ne bih ga dao za nista. 22 god je kod mene. Samo gas, vatra.
Dosta zavisi i od sastava zemlje koliko moze da ide brazda.Inace imt je najizdrzljiviji traktor na svetu
I agree that the back of the plough wasn't as deep as the front - the top link needed to be screwed out. Trouble is, in lift postion the rear of the plough wasn't lifting high enough for that. Presumably the linkage wasn't designed to take that much weight? A couple of assister rams would help - that's what I did with my tandem Nuffield 10-60s.
*That MF35 doesn't have enaugh Power to pull 4 Furrow Plows, the mod that you did gives it good traction but doesn't give it more power in fact with more moving parts you actually loose power to parasitic loads like driving extra cogs for the back end of the tractor, Also the PTO is a parasitic Load!!!*
The conversion might have done better on an old 8N Ford with the 95HP six-cylinder conversion on it. Just a thought.
I have a tractor IMT 533 (yugoslavia) licence MF 35...the best tractor ever
Hahaha uvijek se na ovim klipovima sa fergusonom nađe neki nas Balkanac živio 💪 a 533 je zmaj
*The knock off IMT533 is notorious for having an awful IMT 3 cylinder engine that performs poorly and it's prone to stuttering!*
*These tractors were designed to run on a 4 cylinder continental engine with at least 45.5HP and the IMT533 is underpowered with only 32(plus the issues I mentioned above)*
_-Peace_
@@AutodidactEngineer 533 have 35 hp. IMT dont have a engines,engines are from perkins and IMR...
@@AutodidactEngineer It wasn't that good or reliable. But it was affordable in the Balkan region, so every village had atleast one of 533/539 imt's. Overall it wasn't that good of a tractor. With some time tractors like imt 577 (4 cyl, 77hp) and torpedo td9006(6 cyl, 90hp with deutz licence) became "balkan workhorses"
My favourite massey Ferguson machine
Uybkhvffkhh'vydnggbhfolmphbvyhftgcxfterrrrrrgfc😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😉😗😉😗😉😉😉😉😗😗😗😗😗😗😗😉😉😉😉😉😊😊😊😊😊😊😊😊😊😊😙😙😙😙😙😉😗😊😙🎙️📻🎵📣📢🔊🗾🗻🌋⛰️🏞️🏟️🏗️🏛️🏗️🏚️🏠🏔️🏔️🏜️🏖️🗻🌋🏜️🏝️🗻🗻🗻🏖️🏖️🏖️🏖️🏜️🏜️🏝️🏝️🏖️🏖️🏖️🏖️🏖️🏖️🏖️🏖️🏖️🏖️🏕️🏕️🏕️🏕️🏕️🏕️🏕️🏕️🏕️🏕️🏕️🏕️🏕️🏕️🏕️🏕️
Excelente idea para tan maravilloso tractor. Mi favorito.
Basically turning 2w drive to 4w drive for better traction and stability. Ingenious.
Are you serious 😆it did worse bring them over here and let's see who can cut sod the regular massey or these stupid things
Doesn't dual rear wheels do the same job? I would like to hear the pros and cons of each setup. Thank you... anyone?
Pro: it does provide about 30 to 40 % more traction, (with loss due to moving parts drag. i.e.: gears, pto, friction, etc) but it's also compacting the ground more by inclined tires rather than side by side duals...
Soy agricultor poseo un Forson Major en buen estado ,esta modalidad para el 35 parese muy buena en rendimiento al aumentar la adherencia al suelo por el mismo surco o trocha de trabajo de este modo considero resistencia y proteccion en ambas trasmiciones pero sufrimiento al motor. Me gustaria en ese caso usar 4 ruedas 10×28 y solo 3 rejas en el arado ,me gusta mucho el tema de los tractores
The Caterpillar D8T dozer handles tough jobs with ease.
Good work sir
The only 35 in the world that can handle a 4 moldboard plough!
As short coupled as it is... can it traverse uneven ground? It looks like the slip joints are very short. Very innovative!
instablaster.
Siempre he pensado que para hacer un gran País has de tener buenas herramienta para trabajar👍
Awesome job on 35
Looks spectacular, great machine
Massey Ferguson favourite tractor
It looks like the front plow is digging deeper than the back plow. Needs some tuning of the plow set-up. Good idea though. Thanks for the video.
00
ChiefAUS prone
the same time and
ChiefAUS
Yes I agree.
What about the way the front drive wheel came off the ground as he turned in !
No provision made for articulation.
I would imagine all sorts of cracks and potential breakage after serious use.
I am Brasilian Love agriculture
Quado tu pensá que já viu todo ainda falta algo. Essa foi maravilhoso. Trucar um Ferguson
I don't get it wouldn't just mounting dual wheels give you the same traction boost as it would still be 4 tires?
Yes, but this is so much cooler
This is 4wd as you can see!
Looks really cool and as the owner of a 35X I love the project. However I can’t help agreeing with the comments about diluting the power. Unless you need to add traction for difficult terrain there is no real advantage with a longer drive train. Am I missing something?
You don't, that tractor misses turn radius, lots of it.
I think he is using ground speed pto ?
Dad had two John Deere 730 diesels coupled together with an elaborate hinge between them so that it would articulate like the 4X4 of today. Pulled 6 bottom plow. You drove from the seat of the rear tractor. also controls on rear.
Wow, Farmers inventions..!!
مساء الخير والعافية والورد ⚘والياسمين كم انتم رائعون ومميزون Good evening Flwares كيف تتم عمليت التصنيع للاكسن التاني وساكون ممتنا لكم ❤
Not a lot of spare power in there. I've spent some time in a 35 seat and they aren't big horses. But, that rig sure made for good traction.
Massey fergussion round shape , ❤️❤️ 🙏🙏 from India it's the main catalyst to green revolution in India 🍉🍉
What advantages if u have add double Butt?
More interested in the set up rather than the result I guess it's a private innovation rather than a company one?
Arka tekerleklerin 4'e çıkarılması traktörün uzunluk kazanması ile kafa kaldırma ortadan kaldırılmış oluyor.
Put a 4 furrow on a 35 without that extra axel... I doubt it would pull it. The traction helped the engine... when there is a pull on its.eg.ploughing
Massey Ferguson is best
Very good Happy Birthday!!!!
Great tractors !!
This setup seems totally wrong to me.. You place 4 furrow behind it but have the same hp that is for 2 furrow but you add another rear end to it that is making it work even harder?
Seems like its backwards
BILLSTMAXX Radeon
पराकाश
BILLSTMAXX the extra back end gives the tractor 4wd
How is it backwards? They didn't add two Engines....
Uadaya and the @@VancouverCanucksRock
Harry Ferguson would just laugh at someone who does not understand "The Ferguson System".
Mi primer tractor
My favourite is massy Ferguson for all purposes
You dont need another 2 wheels, just put tracks with track wheel
Obrigado
Nice video
This tractor is LOVLY in whole PAKISTANI CULTIVATES,
MAHBOOB-ALAM-RANA, ,LHR-PAK ISTANBUL
Clever cheaper solution to overcome poor traction, well done.
07 9 dvd 5 4 3rd elms bn 0 veg 9th +0#
Hmm few people understand engine loading... If the engine is stock hp etc. This set up is overloading the engine, pto and transmission for longterm durability. If this was done for "fun" then that another thing.
But this isn't my tractor or money spent. I personally spend efforts on lower parasitic drag and longer life.
Massey is Best
I always wanted to invent one of those, but somebody bet me to it
maessy Ferguson 👌👌👍👍
better put doubles on those wild 35hp
The three cylinder on the 35 is one of the best engines ever built, but that combo will get you bust on heavy or hard ground
That is a rare tractor
beautiful smart machine, user friendly and economical
Why smart user friendly and economical ?
It has the power of a normal one, no ?
Yeah, I bet it's everything but user friendly. Steel seat isn't really that comfortable.
lepaul26
wonder full
Can't wait for the perkins T6.3544 swap
This is a amazing piece adjust your top link out some so the front of the plow will come up and the back will go down a little it’s not running level
Eu tinha um 35 desse era muito bom
Wouldn't dual rear wheels provide the same amount of extra traction and better flotation? And much easier to set up
My exact thought.
Looks cool . Never had enough power 4 1 axle let alone 2 .
needs the perkins
Ese ijuemadte que bellezae gustó ese tractor lelerrinde lo que ah mi palabra que no lo avía visto es prero que veo ajá buenamaquinalosfelicito
Impressive. It can manage to pull a 4 furrow plow through an ALREADY PLOWED field. Next!
A parità di peso non è che aumentando il numero delle ruote motrici aumento la forza di trazione né tantomeno la potenza del motore .
This rig only makes sense in the context of plowing with a four bottom. It really has no other use on earth. By the time that 35 was out, there were much better plowing tractors available. A 35 wasn't very powerful and was too light really to be a 4 bottom tractor anyway. This seams like a whole lotta trouble to go to when you could just get a bigger tractor or a smaller plow. Hell, you could use a Farmall M and get better results.
Not to mention it cut the wheel horsepower from the engine in half, turning all the gearing...
Does rear wheels work or jst dead and dragging?
Interesting concept, have a lot of spares, wonder how it would work on a 20 xD
OK M.
Yuuu7u77777u7788ùjhc nmnjķsdصزخدگفعگعےےففگگ
ئھےءءژ
So would you like to tell me price of " YANA MAR" ??
Looks like IMT 539 😂
Yes like mutant IMT ....
Nice invention
How do you fix the backlight if it won't stay up.
Back. Lift
nice
Amandeep Kaur gffgfdhff
Amandeep Kaur Dee pak
Its IMT 533 bruh🔥
Can you also attach one axle in front
With cutting torch and welder anything and everything is possible.
IMT 539
super
Vinod Kumar laptop
دوست دارى
Vinod Kumar ท.
محمد جديان hckcljnnnj?? Nnnnnnnnnnn? N? Iopthhhyyyyyyygggyy
Qqq11
Sensacional!! Mesma potência, porém mais área de contato....
Туек
Olipas mahtava peli kyntää , ja pieni polttoaineen kulutus
#legend
Which is country?
What's the good of the twin ass? Still only got one engine ,dragging that second ass even iff it's geared cost you in HP.
*Чудова ідея для покращення тягових властивостей трактора! В нас такий енергомодуль розробили для тракторів МТЗ-82 )))*
*Відеоогляд китайського Massey Ferguson 6713* czcams.com/video/JyfQM9xOFZQ/video.html
Bizim türkiyede eskiyi yok etme var halbuki milli gelir bunlar öyle düşünen ne halk ne de devlet var
If Kim Kardashian were a tractor
Don't really see the point of this tractor, I'd rather have changed out the front axle and made it four wheel drive that way and still have the use of the draft control which is clearly not functional on this tractor highlighted by a poor operator who can't control the depth of the plough very well.
Good job
Nice
Where was this exhibition held?
Can't see why he can't get the plough level and at the right height. Bit light on the rear axle.
Don’t level that plow. Get that rear moldboard in the ground and probably kill those 36 ponies.
Really? I don't get it. Other than a gimmick, what good is it?
Би
It's now 4 wheel drive, so more traction
If it works all that matters.
Мост подкатил задний, сейчас подкатывай двигло, видишь не хватает мощи...
First time, that I have ever seen a 35 with double differentials
I bEt it is FUN to turn that rig around:)
if the farm ever catches on fire and the tractor has to haul ass it woujd have to make 2 trips.
neet but would never pull that plow in our Iowa soils and hills.