IKEA Wall Mount Cabinet Installation. Установка раковины ИКЕА
Vložit
- čas přidán 5. 09. 2024
- Look at the PART (2) custom made short drain pipe in the wall - IKEA Cabinet and Custom Drain Pipe. PART (1). • Vanity Cabinet IKEA. P...
Similar projekt with IKEA sink:
IKEA sink installation - • IKEA sink installation...
Under IKEA sink P-Trap installation - • Under IKEA sink P-Trap...
Thanks ЦИФЕI Музыкальная Империя for the music: promodj.com/plo...
IKEA kitchen installation,
Установка кухни ИКЕА,
Instalación de cocina IKEA,
تركيب مطبخ ايكيا,
การติดตั้งห้องครัว IKEA,
IKEA keukeninstallatie,
Instalação de cozinha IKEA,
イケアのキッチン設置,
Installazione della cucina IKEA,
Installation de cuisine IKEA,
IKEA სამზარეულოს მონტაჟი,
IKEA Kücheninstallation,
ايڪس ايڪسين کي بيسائڻ جي تنصيب,
IKEA oshxonasini o'rnatish,
आयकेईए स्वयंपाकघर स्थापना,
IKEA ਰਸੋਈ ਦੀ ਇੰਸਟਾਲੇਸ਼ਨ,
IKEA 부엌 설치,
IKEA асүйін орнату,
IKEA kökinstallation,
My NEW project is done! You may be interested in the Shower Pan Rebuild:
Shower Pan Rebuild. PART 1- czcams.com/video/NdhPWNkK66o/video.html
Cut tile from bottom of the shower. PART 2 - czcams.com/video/NNBwQVA1LwY/video.html
How to Pre-Slope Shower Pan with Beadex. PART 3 - czcams.com/video/prp_vglYv4c/video.html
How to install ABS Shower Drain. PART 4 - czcams.com/video/v57eQe-eC4w/video.html
Shower Pan Liner to ABS Shower Drain. PART 5 - czcams.com/video/9c9xxkL0Am4/video.html
Shower liner and Concrete shower base. PART 6 - czcams.com/video/LSbB_ml0UtE/video.html
RedGard Waterproofing Membrane. PART 7 - czcams.com/video/e_4Wzgtxic0/video.html
Install a Pebble Tile / River Rock Shower Floor. PART 8 - czcams.com/video/m9Zb81AMSI8/video.html
How to make a simple Jig to cut 45-degree tile edges - czcams.com/video/nzSYCPHPmRg/video.html
How to tile Shower Curb with 45 degree outer corners. PART 9 - czcams.com/video/wdOxYGWcFSk/video.html
How to 45 degree tile cut. No Jig, just hand - czcams.com/video/9WmOIYn1QL4/video.html
Footstep in shower. PART 10 - czcams.com/video/2YrMN22kz2k/video.html
Shower Curb, Wall grout & Glass Door Base installation. PART 11 - czcams.com/video/L0Ms7sEOEWM/video.html
How to Silicone a Shower. PART 12 - czcams.com/video/Edb9fXIdkRk/video.html
Schluter, custom size tile edge. Last 13th PART - czcams.com/video/kT9hc3D00ec/video.html
Instablaster.
Самое понятное видео из всех, что смотрела. Переживала, как будут закрываться шкафчики из-за труб, вы все показали) Спасибо огромное!
Рад что пригодилось кому-то!
I like the power outlets directly next to your sink
Хорошее решение для усиления несущей конструкции под мойку. Благодарю за подсказку. У меня такая же тумба, всё думал как её надёжно закрепить под умывальник. Отличное и подробное видео.
Пожалуста !
learn something today, you used a wood strip to mount onto the stud in the wall and the cabinet mount on to the strip!! Just saw another video in which the installer had to cut holes in the dry wall to fit the cabinet mount....your method is much better
Thank you!
Excellence modified mounting method!
Good. Work
Thanks 😊
Almost perfect, before using finger for silicone...
Thank you. This is not a regular silicon. You can see at 4:06 this is paintable silicone, so it will be painted at the next day in wall color.
No one use tools for any painter's caulk/silicon because it will be covered by paint later.
Nice detail, thank you sir!
Thanks for watching!
I never seen power piny just directly above basin. It is absolutely life threatening combination!
That outlet is (it must be) an GFCI so you are protected. Besides , how do you think it would threatening your life even you would splash water like a kid playing in a tub?
Молодец!
thank you for such a detailed video! Very good idea for mounting as well. TFS
I love all your videos! You do amazing work! Thank you for teaching me so much!
P Tran Nice to hear it. Glad it's helps you. Thank you and Happy New Year!
Looks good! Nice job. 👍🏼
Thank you!
Предстоит, завтра
Если в стады не попаду (а скорее всего нет), то использую Ваш метод.
Спасибо !
Godmorgon ! :)
Стады это вряд ли. Они же для кирпичных стен делают IKEA.
Угу . Есть народ - вырезают кусок гипсокартона и "наращивают" стады что бы попасть под уши. Морока еще та
You are so smart and i like your ideas and job 🖒perfact
Thank you so much!
very nice job. love pvc trap clearance!
Thank you!
Great video thanks for that
Awesome job my brother!
Thanks 😊
Я так понимаю, что под данную тумбу вывод канализации и водорозетки можно не выводить так высоко, так как оба ящика имеют достаточный зазор под систему труб... ???
Думаю что да.
Awesome!!! I can’t understand the unlikes.
Thank you!
Thank you for great information 👍
Glad it was helpful!
*goood*
Thank you !
Thanks.
Great video. What's the thickness of the plywood used for support at the back?
Ibrahim Momoh Don't use any type of plywood! This is oak board.
Ibrahim Momoh And the standard thickness of 3/4" (20mm)
You are awesome. G
Wish I would've seen this before I installed mine
Thanks!
Did this sink come with that close drain section that mounts to bottom of the sink?
Yes. IKEA kit comes with the sink, drain, and pvc plumbing for the waste. Faucets are sold separately.
See some sample hire terrylove.com/forums/index.php?threads/ikea-braviken-sink-need-specailized-plumbing.30318/
Fix it All thanks for the reply. Looks like we are going with it
I’m curious why you cut that piece of dry wall out
Corners usually got more drywall mud + corner tape when it finished. So it's never 90 degree. But corner of porcelain sink 90 degree. As a result, sink cannot touch both walls, in my situation left and back sides. After cut off/trimming, the sink corner moves deeper into wall and both sides contact wall without gap.
Good job! Can this sink be mounted on a countertop?
Yes, here is a similar IKEA sink installation:
IKEA sink installation - czcams.com/video/sBSgZ2yLXlk/video.html
Under IKEA sink P-Trap installation - czcams.com/video/Ir1iQ5Z8Ays/video.html
@@FixitAll I mean the one from the movie above (Braviken). When mounting on a countertop, it must be pushed against the wall, because the back is empty?
@@jakubhap3782 i understand. Yes you can push to the wall.
Just cut two holes for drain pipe and fauset hoses. No need cut out a big square ounter sink. Save slab surface us more us you can for strong granite.
@@FixitAll Thanks. I will have a wooden top :)
@@jakubhap3782 I see.
Good work!
What type of glue have you used for mounting the sink on the cabinet?
Ирина вы имеете в виду раковину чем приклеил к тумбочке? Вы можите писать по русски если так проще вам. Спасибо, Василий.
@@FixitAll Да, спасибо =) Просто вчера приобрели - в инструкции написано, мол, силикон не прилагается. А что за силикон, не подскажете? Это клей или уплотнитель какой либо? Странно, что раковина ни на чем, кроме как на нем не должна держаться. Может логичнее было бы на внутренних сторонах боковин тумбы прикрутить пару брусков, чтобы раковина, ни дай бог, в сторону не сдвинулась.
@@user-wt2lt4up5v 100% силикон.Вы не сможите потом оторвать от тумбочки. Так что ничего больше не нужно.
@@user-wt2lt4up5v 100 % силикон есть в любом строительном магазине.
www.homedepot.com/p/GE-Silicone-2-10-1-oz-Clear-Kitchen-and-Bath-Caulk-GE5040-12C/100663319
@@FixitAll Спасибо!
А между стеной и раковиной - тоже можно этот же силикон использовать?
Was old vanity same height? That power outlet looks way low.
If I remember correctly, when freshly built house is being wired, electricians put outlet at 42in and light switch at 48 height of junction box bottom.
Same. You can see old blue paint from sink at 2:12
There was pedestal sink.
pro install
How deep are the drawers on this cabinet?
I cant remember. Check IKEA website.
It is a full size drawer.
Is the sink included in the cabinet?
No, but you can buy it at same time in IKEA.
@@FixitAll thanks for the reply. What specific tools did you use for this one please?
@@edenharayo4195 usually just a drill and screwdriver. Depend on the wall construction.
How long it take?
5hrs.
Розетка. Как вы не боитесь?? Да и вроде не комильфо розетка в раковине.
Всё по стандартам нашего штата.
@@FixitAll , ну если только)
the drain attachment to the wall... One of the worst things I ever seen lol
You mean IKEA p-trap design ?
Anyone came from Paul's Hardware?
IKEA
I’ve never seen someone have to drill so many holes and bastardise a unit that is designed so you don’t have to.
Messy job
Show me how you can.
You have to understand why he did what he did...There is a reason behind all "unnecessary" steps.
@@Bokicazver Thank you.
I was thinking the same? Why was it necessary to add an additional piece of wood, did he not trust the unit to support the back of the basin?
I thought he added the wood because the wall studs did not align with the ikea brackets, but ikea specifically state that the rear piece of wood can be used to add additional support screws.
The biggest fault is cutting the ikea unit, that will let humidity in over time as the material is not high quality, the correct way to add a piece of wood is to move the ikea brackets away from the wall one knotch, by using the fixing screws in the alternative holes provided in the bracket, instead he just put screws in all 4 holes…. Lots of different types of screws used there as well, I think even drywall screws?
The idea of the corner screw through the middle of the bracket was interesting though, but unnecessary.
Wouldn’t all of this modification have been unnecessary and resolved by just mounting the unit 2cm higher and according to the instructions.
Don’t do this. Bad idea
Do it. I doit 25 years and 100th happy customers.