Wind Loads Calculations using ASCE 7-16 - Part 1: Basic Mechanism of Wind Load on Structures

In this video series, we will learn how to calculate wind loads on structures using ASCE 7-16 Specification.
We will take example problems of different variety of structures which will help us to cover all aspects and
conditions of wind loadings described in the specification.
This video is part 1, in which we are going to learn BASIC MECHANISM OF WIND LOADS ON ANY STRUCTURE.
===============================================================
THEORETICAL TOPICS
===============================================================
1) Concept of Effective Length Factor for Column Design (Manual Calculations ; Verify from Software)
• Concept of Effective L...
===============================================================
STEEL CONNECTION DESIGN COURSE USING IDEA STATICA VIDEOS LINKS:
===============================================================
1) Truss Connection (Braces+Bottom Chord) - Steel Connection Design Series using IDEA STATICA
• Truss Connection (Brac...
2) Truss Connection(Top Chord+Braces+Purlins)-Steel Connection Design Series using IDEA STATICA
• Truss Connection(Top C...
3) Truss Connection (Main Chords + I Girder)-Steel Connection Design Series using IDEA STATICA
• Truss Connection (Main...
==========================================================================
STEEL STRUCTURES ANALYSIS AND DESIGN COURSE USING MIDAS GEN VIDEOS LINKS:
==========================================================================
1) SIMPLE STEEL TRUSS SHED (Part 1)
• Steel Structures: Anal...
2) SIMPLE STEEL TRUSS SHED (Part 2)
• Steel Structures: Anal...
============================================================================
REINFORCED CONCRETE ANALYSIS AND DESIGN COURSE USING MIDAS GEN VIDEOS LINKS:
============================================================================
1) INTRODUCTION TO THE COURSE:
• Reinforced Concrete An...
2) EX 1: SIMPLE BEAM ANALYSIS:
• Reinforced Concrete An...
3) EX 2: SIMPLE BEAM DESIGN:
• Reinforced Concrete An...
4) EX 3: BEAM CHECK FOR ANY GIVEN REBARS:
• Reinforced Concrete An...
5) EX 4: ANALYSIS AND DESIGN OF FRAME
• Reinforced Concrete An...
6) EX5: MODELLING, ANALYSIS & DESIGN OF ONE STORY HOUSE (PART1)
• RC Analysis/Design Cou...
7) EX5: MODELLING, ANALYSIS & DESIGN OF ONE STORY HOUSE (PART2)
• RC Analysis/Design Cou...
8) EX5: MODELLING, ANALYSIS & DESIGN OF ONE STORY HOUSE (PART3)
• RC Analysis/Design Cou...
================================================================
Thank You for Watching our videos.
If you Like our videos then please Hit Like/Subscribe Button and Comments. Also Share with your friends to encourage us.
Best Regards
ANALYSIS AND DESIGN STUDIO

[@jamalnaser1933]

Very detailed and well prepared video. Thanks for taking the time to prepare.

[@GQStructures]

this is a very informative video!

Excelent video!! Thanks a lot for the explanation.

[@analysisdesignstudio3363]

Glad it was helpful!

[@sothattheng8624]

Thanks for your sharing!

[@analysisdesignstudio3363]

Thanks for Appreciation..

[@shoaibalam7555]

Very informative 👍

[@analysisdesignstudio3363]

Thanks for Appreciation..

[@andreiperim594]

Great video man!!

[@analysisdesignstudio3363]

Thanks for Appreciation

[@887saba]

wonderful work...

[@analysisdesignstudio3363]

Thanks for Appreciation..

[@ActualMLC]

great video. please share the next part too

[@analysisdesignstudio3363]

Thanks for Appreciation.. Other parts include example 1 2 3. Uploaded already.

[@harmkmmuhammadkamranmalik1745]

Thank you ❤️😊😊

[@analysisdesignstudio3363]

Thanks for Appreciation..

[@mostafaabdelhameed7228]

Thank you ❤

[@analysisdesignstudio3363]

You're welcome 😊

[@abusayeed4787]

so simple to understan

[@analysisdesignstudio3363]

Thanks. Keep watching and sharing.

[@mukhalladmurad6877]

Very clear video
Please requierd Envelope procedures examples

[@analysisdesignstudio3363]

Ok soon

[@MuhammadBilal-xg9md]

Good Work. Make a similar video abou arched roof.

[@analysisdesignstudio3363]

Thanks for Appreciation.. In Sha Allah soon ❤❤

[@ActualMLC]

@@analysisdesignstudio3363 please we are waiting video for arched roofs

[@jessiekibir8612]

Hello sir. How to apply the internal pressure coefficients in ETABS?

[@analysisdesignstudio3363]

Hello Dear. I prefer to calculate wind loads manually and apply them manually. Software generated loads are not corrected as engineer always have something missing and confused about that.

[@mudassirpirzada7855]

In Pakistan, people are installing solar without knowing the importance strength of the structure under the wind load. So please make a video on solar structure design comprehensively .

[@analysisdesignstudio3363]

Thanks. Dear Brother, I have already posted solar design series videos. you can find them in my channel videos section

[@navedkhan5846]

DHANSU BOSS

[@analysisdesignstudio3363]

Thanks for Appreciation. Keep Sharing the videos.

[@kristiankonde4709]

Svp! En français

[@analysisdesignstudio3363]

Je ne connais que l'anglais frère .. merci d'avoir aimé ma vidéo. j'espère que vous regarderez toutes mes vidéos..

[@vsdktbkm5012]

the word "Wind" is singular. So you say: when "wind flows".. and not "wind flow".

[@analysisdesignstudio3363]

Thanks for noticing.

[@vsdktbkm5012]

How about providing info on how this code could be used in locations other than in the US. All the probability based data in the code is for the US. Wind speed with a given MRI is function of location on the earth.