CHEAP AMAZON BROADHEAD TEST
Vložit
- čas přidán 10. 09. 2024
- BEEREAL MERCH - beerealmerch.com
ULTRAVIEW - ultraviewarche...
MY LAS ARCHERY EQUIPMENT - www.lancastera...
Check out my PODCAST - apple.co/3vyQ6JP
INSTAGRAM - / chrisbeereal
SAVE 25% ON HUNTWISE - www.huntwise.c...
SAVE 10% ON MAGVIEW CODE: BEEREAL - magviewgear.com/
My CAMERA Gear
My MAIN Camera - rb.gy/nzanez
My Favorite Mic - rb.gy/vbl1vn
My VLOG Lens - rb.gy/5pk6eg
Best DO-IT All Lens - rb.gy/klx2x5
Best Hunting Lens - rb.gy/wvwxan
Audio Recorder - rb.gy/5pklm2
Other Gear
Editing Laptop - rb.gy/jps8mn
Editing Software - rb.gy/pwwuo9
Best Action Cam - rb.gy/w302ih
Camera Case - rb.gy/ie3n8l
Best Beginner Camera to Film Hunts - rb.gy/j902od
Let's see what a "good " broadhead does on that same block.
I agree. This video is useless without shooting the "good" version at the same target and then comparing the damage.
exactly Lusk Archery does a great broadhead test and he has done a couple amazon heads that actually tested very good. Deepower 125gr heads tested very well.
For real
He'd probably would loose sponsorship on a broadhead he uses
I was about to say the same thing. None of them would last or do any better.
Oh, it broke when shooting a cinder block so it won’t work on an animal
So what would you suggest I use for a Broadhead if I'm going cinder block hunting
300 Blackout
Hunting cinder blocks from a tree stand
Annihilators lol
.577 Tyrannosaur works very well for hunting cinder blocks.
Blunts. Perfect use for those $12/dozen hammer blunts.
I’m sure some of the name brand ones would get destroyed as well😂
True, nothing will be sharp after smashing into metal or concrete lol
@@0mniVerse777 lusk archery does pretty good reviews of broadheads but most of the broadheads don’t survive concrete😂
He didn't bend his brand name ones for a reason.....
Smart smart...
Love your content, Chris, but this was not a good test at all. There was no control, as you never shot a good broadhead under the same conditions. Also, shooting into concrete a) does not simulate the intended use and b) just highlighted that most of the issue was with the arrows blowing up, not the broadheads. Also, pulling the first broadhead out and showing that it outperformed the better broadhead when you cut the paper was not a good start. Would love to see you redo this by shooting real targets while evaluating flight characteristics and penetration compared to better broadheads. Again, love your content, not a hater.
Relax man these broadheads are all junk he was just having fun. No real test needed to see they were all garbage.
100% agree. This was not a good look....
well it was because some bruadheads are not even damaged after u shoot them into concrete
@@KingKaboom2011 hahahaahahahahaha
Agreed, bad comparison.
Rather titled this video.
"Cheap broads comparisons from china." He didn't even used his brand name ones..
Pointless test really.. Fire anything at a concrete block doing 300fps and its not going to look pretty.. Last time I checked a deer isn't made of metal nor concrete !!
I took down a 220 pound 8 point with one of those first broad heads you reviewed. They may be cheap af but apparently they get the job done 😂
Yeah they only have to work once. In my experience most expandable heads are junk once they've gone through an animal and hit the ground.
been shooting the knock off montecs for a while now. they're a bit less durable but I've still killed 3 o4 with one broadhead,
@@BenDownTooLong exactly. I have a friend who mounts the arrow (if he recovers it, obviously) with any fan, rack, etc. so he already factors in not having that arrow in his quiver anymore before release. Thus he has no problem using low cost parts, .006 straightness shafts, etc.
He shares my belief that getting closer (or bringing the game closer) is about 80% of the challenge of bowhunting, not practicing 50+ yard shots for months before the seasons start. Every culture on earth fed itself for generations with a bent stick and a string shooting somewhat straighter sticks with rock heads that certainly weren't matched to the tenth of a grain, so we don't put as much stock in super-tuning everything as some do. Pretty much down to just "this arrow is always outside the group, so set it aside, re-fletch, maybe try different heads to see if anything makes it hit the same as the others."
You should go fishing
I was excited to see this as i had terrible experience buying cheap broadheads in the past. Why shoot a cement block and not compare accuracy compared to industry standard broadheads
Ya cement block was a pretty stupid idea 3/4 plywood would of made some sense
Thankfully Chris I don't typically hunt steel plates or cinder blocks. Why not? Because no matter how long I marinate them they are still very, very tough to chew.
You should do the same test with ballistics gel, it's the most realistic and you can see the different penetration levels.
Shoot them at a normal target why are you shooting them at metal
The black leaf shaped one with the bleeders off the sides is a knock-off Dirt Nap DRT broadhead. Taken a number of javelina with them.
Yep, i have some and excellent heads (mine is red)
Do the same spin tests with the name brand ones you will find they are not perfect
Once i bought g5 strikers and they were all more wobbly than china heads, so never g5 again.
Anyone else see the three pins in his sight housing(@13:21 minutes) new uv product?????
That’s a sick multi pin ultraview you got there 😉
I noticed that to😂
@@bradybecker7987 just noticed this weeks later🤣
Oh, it broke when shooting a cinder block so it won’t work on an animal…right
Try some brand name ones on the same test and I bet they would break as well
Funny video but pretty useless as far as how bad they are and regarding them not working
Almost all broadheads are made over seas 🤣 .... Probably same plant
I have bought a bunch of Deepower fixed heads off of Amazon based off of Lusk's testing....let me tell you they are just as sharp (if not sharper), just as durable (if not more durable) and just as accurate than MANY of the big name heads out there.
I use the knock off Montec G5s and they result in the same kind of pass through shots. Easy to hone on a stone, spin test, work well.
I have the DEEPOWER montec style ones. Let me tell ya… they fly amazing!
@@The_Arrow_Life Ditto
100 percent correct. They’re the best. Lusky is the best
asin of the ones you bought?
Well now we know not to buy Amazon broadheads to hunt statues lol
Hardened steel plate. Anything out of a bow or x bow is getting destroyed
Just curious.. what would happen if you did the same thing with the grim reaper micro hades?
Love the creative ’outdoor’ sounds. Is that your pet 🦗? Yeah those heads were cheap, but was really a ‘fair test’? I’m sure you could bend brand name heads with pliers and crumple them shooting disc blades and cinder blocks.
But, that sure was fun to watch!
I know you guys were just having fun but you can’t really call any of that a test at best that was a “bash” on cheap probably copyright stealing arrows I would have liked to see a real review before you destroyed them
Shoot a reaper, muzzy, and iron will at that plate. I know these ones are cheap but I'd be curious to see if those do much better
Would American broadheads do as well against a cinder block 🤔🤕
This test really didn’t prove anything but the weight, if you shoot any broadhead at a steel plate or cement block it’s going to bend or break and most broadheads are not even made in the U.S.A just like most archery products. The best broadheads on Amazon is the *Deepower broadheads*
I seriously though those cricket sounds were done in post production lol
Ok now do the same exact thing with those brand names that you seem to think will survive being shot at cinder blocks an steel plates like wtf are you thinking
A lot of them do survive. Watch most Broadhead testing videos and a lot of guys shoot them into cinder blocks and through steel drums or chairs.
check out Lusk archery adventures he does great reviews. also watch his Deepower 125gr broadhead video its one from amazon that actually test better than most big name heads
The broadhead isn't going to stop your arrow from shattering
A collar on the front will and if it’s a decent head it will fair way better than those ones he tested.
@@Pr1mitiveHunter collars aren't even relevant to this argument even if you throw a name brand broadhead on there they ARE NOT GOING TO STOP YOUR ARROW FROM SHATTERING WHEN SHOOTING CINDERBLOCKS OR HARDENED STEEL PLATES and even if the arrow does survive shooting ridiculous shit the arrow would be so severely compromised it should never be shot again
Crazy part is the are probably made at the same place as the real ones. they just didn’t pass inspection.
Let’s see what a “good” broadhead would do 😂
Totally agree!
Right... The blades would break because they're hardened better, but the ferrules would definitely bend the exact same way
Honestly all I use is Amazon broad heads and they’ve never failed me… as a matter a fact I used the cheap skinny blade the ones Chris referee to as.
I have the exact same ones (cheap skinny blade) he may say they are garbage and useless but I wouldn’t want to be stood on the receiving end of one
@@D49729 yup, they are pretty sharp in my opinion…
Test industry standards on the block now
Problem is- these “higher brand” broadheads are produced overseas just to a higher standard. And some just slightly higher at best.
I use the cheap gold skinny bladed ones for coypu, they are devastating but you cannot use them twice 😅
They used to be in Walmart they were called Lightning’s by Allen and my dad killed quite a few deer with them and they left blood better than anything else he has shot but u right u couldn’t shoot them twice
You are just treating these broad heads bad because they are not name brand I use the cheap ones like the first one you should they are sharp and no issues kill deer the same as the expensive ones it's shot placement and sharpness
I have bought 3 packs of the G5 M3's from my local shop recently and they aren't sharp either. The band-aide was a nice touch in their packaging. Still had to spend time to make them sharp though.
I buy the cheap two blade Chinese heads for my dad to use on pigs lol they’ve done a really good jobs on big boars
For anyone shooting rage expandable broadheads there are Chinese ones for around $20 a pack that work perfectly have seen many animals blown out with the Chinese ones
I think I saw the rage knockoffs for 1$ each if you guy enough of them. Crazy. Probably made by the same company and imported to the USA where they stick their brand name on it and sell at a 1000% markup.
Amazon review: "Terrible product. I tried shooting these broadheads at a plowing disc and a cinderblock. Couldnt smoke either of them. Totally worthless."
That cricket sound adds so many drama to the quality of these broadheads, LoL
I need help. Anyone. I just bought a QAD drop away rest for my Bowtech CP28 and I had it timed up correctly and even then the launcher is not dropping away fast enough and my fletching are hitting it and causing my arrows to fly weird and also causing me to lose some veins. I need help.
Dm me☝️☝️☝️
Thanks for watching and commenting
I have got some rewards for you🎉🎉🎉
What new scope do I see on that bow 😮💨
Anyone else peep the 3 pin cartridge ? Free one on chris bee? For seeing it lol
Chinese-made knock-off broadheads are pretty much all single-time use. I killed a buck on opening day with a 1-piece Deepower 125 grain 3-blade broadhead with unvented blades. Had a complete pass-thru and the deer went 10 yards and dropped.
If you go to 13:25 you can see the next update for ultra view it’s a three pin site it’s the one that’s on his bow
That carbon express braodhead nockoff was a copy of the carbon express f-15.
If you need a future video idea, would really like to see a comparison between a recurve, long bow and compound bow as far as pentetration goes with an arrow? Obviously recurves and long bows are still effective but how do they really match up?
I don't think I'll be shooting my hunting equipment at steel any time soon I mean well heck I might go try to harvest me a cinder block in the morning lol 🤣
wish I found this sooner... last year I had two deer pull out pliers and bend my broad head and one did some crazy ninja move with a cement block.
Out of curiosity, how do high end heads stand up to cinder blocks?
Dm me☝️☝️☝️
Thanks for watching and commenting
I have got some rewards for you🎉🎉🎉
It also says something when the metal on the chinesium metal on the broadhead breaks before the carbon arrow does because its gonna break at the weakest point
Too bad you didn't have a close up camera and shot the impacts on super slow mo. That would have been really cool. Awesome videos man!
I don't know why but when chris shh'd the cricket I laughed harder than I should have😂
3 pin for the xl 👀
Can’t wait for the moose vids Chris 🔥🔥
Maybe dumb questions here. But what would happen to an arrow and broadhead in industry standard if you shot a cement block? My Muzzy got ruined and pushed into arrow when it hit a rock after passing through the deer... Deer down, but broadhead/arrow down too.
The last one you pulled out of the box that you didn't know is a copy of the Woodsman Elite Series 3.
I'm just curious why you would shoot steel and concrete to show how "terrible" they are? Can you do the same shots with your "real" broadheads? I guarantee they will be unusable given the same circumstances.
Guess deer are made of disk blades and concrete blocks
DirtNap is that first one you didn’t know
So ready to get the new button release ordered it 2 weeks ago. Hopefully before bow season starts!
You guys should do a temu broadhead test
fun to watch as i'm sure we've all been tempted by the cheap knock offs at one point or another. Like others have said, would prefer to see an accuracy and regular target test before the destruction. Toss in a couple name brands as well to see how they stack up through all the tests.
You should make your own broadhead that would be sick
About the first ones you showed, we fired one at the tread side of a tire at 40 yards with a 10 point nitro 505. It blew right through the first side and then turned to the left bit with the front of the arrow coming to rest just outside of the tire (like where the psi numbers are). It completely destroyed the broadhead and bent the ferrule. One of the blades was stuck in the tread area of the tire, which is also where the shaft broke inside the tire right before the fletching. The tire actually rolled a way a couple feet when we hit it.
The one before the "magnus" is a copy of the DRT dirtnap
Funny. More tests, please. Maybe with mdf or cardboard.
What does a quality broadhead look like after the same cinder block shot for comparison?
Mr bee I think we saw something we weren't supposed to see in that UV3 XL. Multi pins?
So I want a test of all the "quality" high priced broadheads tested on the metal disc.. also bend them with pliers if they bend or don't hold up we can call them trash also lol
How does the wobble test thing work?
I use the NAP Bloodrunner broadheads.
White scope ring, and multipin 👀
All of these test will be applicable if I ever find myself searching for a head to hunt disc blades and cinder blocks.
Are they really knock offs? Probably the same thing, only over paying for a brand name 😂
Those gold heads with the thin blades are no doubt a knock off of the old school Satellite broadheads. The first deer I ever shot in the shoulder, I was using one of those. I ended up killing that buck 2 weeks later during rifle season, and that broadhead was still stuck in the heaviest part of the scapula, with all three blades shattered.
Hard to see how well they spin when u spinning them on a 6 tho arrow! Fun video tho enjoyed seeing some broadheads get trashed
I purchased some of these cheap broadheads in the old Fred Bear style, not any of the ones you tested,I sharpened them myself using a Lansky sharpener, got them razor sharp. During the Pa. archery bear season I killed a 385 lb. 19 11/16 Pope and Young black bear. The arrow passed through both sides of the rib cage with a quartering away shot and the broadhead was not damaged.
I think we all have the same questions lol. Why not shoot at the normal broad head target and compare to the actual industry brand so it is a side by side comparison. Either way great content Chris Bee, keep up the good work.
That scope is very unique 🤫
Everyone should definitely go out and buy broadheads in fancy retail packaging for 20 each
The Golden mechanical are a knock off of antler insanity battle axe broadhead, they are sick lol they do an incredible job on deer
At 5:25, that's a Dirt Nap DRT knock-off.
Seen a popular CZcamsr tht test broad heads from every brand..And he rated Deep Power fixed head on Amazon very high..
Worst test ive ever seen. All you did was bash the broadheads. Gave them no chance to even remotely do good. 👎🏻
Is that’s a new three pin UV sight I see!!
Yeah, hard to sue someone for copyright infringement when they’re in another country. Especially a country like China.
Hey chris, have you seen the Mathews/bowtech hybrid that’s for sale out there? A Mathews riser with bowtech cams. A Mathtech. You should check that one out as another video like this. Lol
Try your testing with a Rage?
Results will be the same but waaaay more expensive!!
You should try cheap Amazon stabilizer test
Best ones i found are Fire N the hole fixed broadheads 30 dollars for a 3 pack and leaves a hole the size of a golf ball. Dropped my first deer with one
Can we get a best lighted nocks comparison video
I would like you to do tests with the original brands of the same tips to see if it is true that is better sorry for bothering but I'm new in archery thank you
Title should be "Cheap Amazon Broadhead Destruction" . No testing really. Shooting any broadhead at steel or bricks will destroy it. Would love to see you do this test on a serious note. Apple-to-apple comparing of cheap vs top line. Unless it effects sponsors or course then well 🤔 🤘😎
6:27 looks like a woodsman copy. Awesome video!
That's why I shoot NAP HELLRAZOR fixed blade broadheads all steel and fly great and you can sharpen them. Worth 40 bucks for 3 heads. Cool video
This time it was a pointless test, sorry.
Hardly a good comparison. Consumers just can't take your word that the industry standards are that much better.
second expandable is like a rocky mountain. Feradyne actually sued a foreign maker of their broadheads and won the court case.
That gold one was a copy of a axe hybrid
Test your expensive broadheads on that disk!