Checkout the S3 pipe. I did a short review of it. Works great and has some added durability built into it. Tune wise more up top, no noticeable loss on the bottom. *Torquier then my fatty. Havent measured but is built tighter to the frame and higher off the ground *supposedly, havent measured
Motoes recommend a exhaust flange protector when using their pipe on the previous gen bikes. I would get one from Bullet Proof Designs just to be on the safe side. From what I'm seeing on Facebook new cylinders are hard to come by for the 23+ tbi bikes.
How much clearance did u get from the radiator hose that runs outside of the frame? That thing scares me. I tied it back closer to the frame as much as good without pinching
Playing devil's advocate here..... If that pipe is stronger than the stock one and doesn't dent, doesn't all that force get transmitted to the cylinder? It does look sexy!
Have you ever tested the ride engineering showa mounted steering stabilizer? I'm about 50 50 woods vs moto and would like to try a stabilizer but especially one that's hidden behind the plate and wouldn't get in the way, if I ever go with a XC gear bar mount. Your the Man Morgan I don't see how you manage to work a job , keep a channel going, ride your bike , ect. Thanks in advance
It should be illegal to have a new pipe install vid and not hear it 😂😂
Looks awesome on the bike!
Being the old fart that I am, I'm really interested in that 1975 Yamaha 125 Enduro. Looks to be in good shape. Good luck in the hard enduro event.🏁
I also just tested the bash plate for these bikes as well and it should be for sale now. Love my Turkish brothers
Sweet pipe👍
That is a good looking pipe….
Thanks
Checkout the S3 pipe. I did a short review of it. Works great and has some added durability built into it. Tune wise more up top, no noticeable loss on the bottom. *Torquier then my fatty. Havent measured but is built tighter to the frame and higher off the ground *supposedly, havent measured
What a beaut!
I want one!!!
That is a sweet looking pipe but I would stick with a knarly or pro circuit platinum 2.
Motoes recommend a exhaust flange protector when using their pipe on the previous gen bikes. I would get one from Bullet Proof Designs just to be on the safe side. From what I'm seeing on Facebook new cylinders are hard to come by for the 23+ tbi bikes.
Already have it
How much clearance did u get from the radiator hose that runs outside of the frame? That thing scares me. I tied it back closer to the frame as much as good without pinching
More for sure
I'd like to see how easy or difficult it will be to blow that pipe out with all those welds.👍
We will find out soon I’m sure
Any chance the front tire will rub at full compression?
No. I tested it later
you got the clearance clarence...
Hi, Please do you have some aluminum Rad guards and do they fit from last TPI models
Yes. Bulletproof designs
@@highlandcycles so they fit from last TPI?
@@milosbgd yep
@@highlandcycles Yess, many thanks, money savings :)
Ride feedback,sound? 🍿
Great low end. Sounds awesome
Ride eval to follow?
Oh yeah
Where's your 40lb skid plate/pipe guard?
Nope. Hate those
@@highlandcycles I think that they look f ing knarly. Like at some point you are just going to throw your shit down so hard your mother feels it.
What skid plate are you running?
Stock
@@highlandcyclesHow thick is it - 6 or 8 mm?
@@thailandmopedadventures611 not sure. It’s burly
@@highlandcycles Thanks Morgan!
Playing devil's advocate here..... If that pipe is stronger than the stock one and doesn't dent, doesn't all that force get transmitted to the cylinder? It does look sexy!
That is my concern too. We will find out.
How much for the fmf?
300 for a new one.
Have you ever tested the ride engineering showa mounted steering stabilizer? I'm about 50 50 woods vs moto and would like to try a stabilizer but especially one that's hidden behind the plate and wouldn't get in the way, if I ever go with a XC gear bar mount. Your the Man Morgan I don't see how you manage to work a job , keep a channel going, ride your bike , ect. Thanks in advance
@@barnescycle yes! It is awesome
I'm gonna guess at 300cm of clearance 😆
Confirmed: 2023 KTM 250XC stock pipe clearance is 15 3/8" - 15 1/2"