Diagnosing Rear End Noise
Vložit
- čas přidán 29. 08. 2024
- Diagnose and repair rear suspension noise . Learn how to replace rear sway bar bushing and links 2008 Toyota Camry.
Here are some of the tools that jimthecarguy uses
www.amazon.com...
Due to factors beyond the control of jimthecarguy, it cannot guarantee against unauthorized modifications of this information,. jimthecarguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. jimthecarguy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy.Due to factors beyond the control of jimthecarguy, it cannot guarantee against unauthorized modifications of this information,. jimthecarguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. jimthecarguy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy.
Thank you for taking the time to do the videos. Very well done without a lot of talk before you get down to work. You have helped me through many jobs. Appreciate your efforts.
Mr. Jim, just want to thank you for all the awesome content you keep putting out. Your videos have helped me tremendously in getting some suspension jobs done on my own car. You are very thorough and offer a lot details and pointers that make the job so much easier. Very greatful for all the videos you have shared.
Finally someone mentioned actual banging noise. It's so uncomfortable the ride but when I load my trunk with straight heavy polls that banging is dampened.
Thanks for watching.
I had all those tools and within 20 minutes I had it all done with left over parts.
...good job Jim explaining how to do this....gives me the confidence to do it myself when the time comes...thanks for posting :)
Glad to help
Great video very helpful! Now i can work on my lexus es 300. Thank You!
Mr. Seen have a lot experience, I did change the both bushing, both struts, both trailing arm, on my 2007 camry and still make the same noise when hit small bump any others ideas I really need help 👍👍👍
Thanks for the video. I think I have the same problem. What is the estimated cost? roughly.
I have this noise going on from my 2011 Camry. I suspected these bushings. You did a video a few years ago on a gold camry from this same generation with bad sway bar bushings.
Yes this is a very common problem. Thanks for watching.
Did it fix your problem? I have a 2008 Camry it makes a lot of noise qhen im driving on highway i thought it was the tires
@@Saulgr
Yes. Cheap and easy fix.
My 2006 Lexus ES is experiencing the same issue 😩😌 I called the dealers but they don't wanna quote over the phone.
hhhhhmmm, I wonder if thats where the noise that Toyota 4Runner is making. Didn't think to check that. Thank you for sharing!
Good video on the end links and sway bar bushing install and repair Jim
Thanks for watching.
You know when you easily get two knuckles deep into a bushing shes loose. Way to go Jim!
Thanks for watching Glen.
Nice find and easy to overlook especially when the bushing wasn’t cracked or split. Do you recommend any lubricant between the bushing contact surface?
Thanks for watching. No we put them on dry.
Should I have both wheels off the ground when doing this or one side at a time? Thanks.
Ben and Jerry's is usually responsible for my rear end noise.
Hahaha .
I haven't had much luck with the allen key stabilizer bars. I've had to cut the bolt off. Stupid design. I've had the same noise problem with my car. I've inspected the problem before and haven't had any luck finding the noise problem. I'm going to change the bushing on the sway bar and hopefully that will take care of the noise problem.
The bushing is most of the time the problem with this kind of car.Thanks for watching.
Hello Jim. Once again you have provided a valuable service to those who might want to attack this issue on there own. If I needed to do this job I would feel comfortable once viewing this video. Mike and I have been talking and would love to find a time to get together over a camp fire. Maybe next year? :)
Hi Wyatt,
Yes for sure you tell me when and where.How are you doing with your knee?
2018 toyota camry le hybrid. 120,000 highway miles. Had alignment done, new tires, brakes. Got the car back from repair station and when a i hit any bumps the rear end sounds like shocks are not secured properly and a rattle noise. I asked mechanic to look at, he says everything in good order, he wants to start by replacing rear shock mounts. What does jim say
Came here to learn how to diagnose a rear suspension creak I have. Video literally starts with the problem being already identified :| . Change the title to "How to replace sway bar bushings" and be done with it.
My biggest issue is finding suspension issues and noises. I can troubleshoot modules, communication lines, timing issues, shorts, opens but I have a hard time with suspension issues and vibrations. I do more electrical related issues then suspension at my shop. It's not by choice it's just what I get. That might be why but it drives me nuts. Like you said when the cars weight I isn't in play a lot of the time there's barely any movement or if any, but as soon as the cars weight comes in the play it's over.
That is for sure noises are very difficult to pin point.Thanks for watching.
How you're doing Jim? Hope you and family are healthy and safe.
Everything here is very good. I hope all is well with you.
Was it anti-seize that you put on the bolts for the sway bar bushings?
I wish you was in Ga . I have noise in my 09 Toyota Matrix rear and they tell me they don't know what the problem is , I have replaced all mounts new brake system and I really frustrated right now . They just do not make mechanics like you anymore .
Thank you. When do you hear the noise?
@@jimthecarguy when acceleration and small bumps.
Hi mr Jim
I have the same problem are you by chance in Chicago Illinois area ? I will come to repair my car with you .
Thank you
Hi Jim. I have a 2004 Camry with the same noise in the rear, would it be pretty much the same procedure on a 2004? Thanks for your videos and sharing your knowledge!
Yes it will
@@jimthecarguy thank you!
See U on d next one Jim thanks for uploading this video, U just save me Baby milk money😁
Well done.....thank you.
I have a 97 Camry when I go in reverse i here a popping/thud sound coming from the rear end im wondering is it because of this
There was literally no diagnostics in this video, just replacement of parts
Regards for you from Iraq
So I have a f250 4x4 changed the shocks still making loud clunking noise from the rear end only going over speed bumps but it sounds and sometimes feels like the bed is gonna break any ideas?
Jim, I have 2007 Toyota Camry. The rear right wheel when lifted has some scrapping noise and the movement is not free. Brake pads are good. Mechanic replaced hub bearing but it still sounds like a helicopter when on highway. I thought replacing caliper might do it, what do you think?
Sounds like a bad wheel bearing.
Greetings for you from Iraq
Welcome to New Jersey. Thanks for watching.
Anyone know what could cause rear end noise when I turn or hit bumps after installing a sway bar
Are the OEM units built with grease sealed in? How often does grease have to added to these Moog units?
The OEM don't have grease fittings. The Moog need to be greased maybe once a year depending on the driving conditions.
I would have liked to hear the noise. I think I have the problem on my car.
Thanks for watching.
Hey Jim,long time no hear.well now it's master cylinder problems.i have spent more in repairs than what it's worth.i think I should get another car,but...what do you say?
Hopefully they start cash for clunkers soon again and you'll be saved
Thanks for watching.
Thanks for watching.
Why did you change the links?
Thanks for watching.
There's a bowling ball in the trunk. 🤔☺️
Good point . Sometime the noise is from stuff in the trunk.
How much did you charge him?
The labor charge was 1 Hr. plus the parts.
@ 02:56 Jim the Basketball Guy
Hahaha you like that.