Hi Nelca, In the Active Profile Element, what is the option if the Road Surface is made from Concrete? Should choose CIE C1, C2 or others? the option only Porous Aspalt. Also what we should choose for Valuation Field. what we should Choose of Illuminance Class? Should M4, C1 C5 or Others?
Hi Wong. You have so many questions and it takes long discussions to answer them. May I request to enroll in my Udemy course "Road Lighting Design Techniques" so you will get all the answers? Thank you! Below is the link to enroll: www.udemy.com/course/road-lighting-design-using-dialux-evo/?referralCode=6C150BDEB3270B0A144C
hi ma'am, I'm baba from Indonesia I have a question about the road surface, please explain about the standardization of the correct use of the road surface, Thank you mom, may health and safety always be with you ma'am,😊
the light does not automatically goes to DIALux after you download it, you have to import it into DIALux. There's so many cuts in your video, trimming also the necessary information confusing the new users of this softwafe.
Great videos. You helped me a lot with my final project. One question Nelca. What am I supposed to do in case of a street light system with a power regulation program? For instance, 2 hours with a 100%, 1 hour 70%, 4 hours at 50%, 1 hour 70% and the last hour with 100%. Am I supposed to meet the minimum illuminations values also during the period with the 50% power? By the way, cool Italian accent. I'm from Spain. Thanks
Hi, in this video you showing normal street lighting design its good, but I need how to design street lighting for the project using CAD/IFC/Revit reference in that particular roads shown in CAD/Revit, Please solve the problem, thank you..
Hey thankyou so much fr the information. It was very helpfull. By the way i want some guidance to the parameters in the dialux, can you share any documnt for reference? And also try for street light of 10m height what is the minimum wattage for 15m distance? Consider 7 m width road and 2 cycle lanes.
Hi nelca. very good work. why it's not possible to change the number of grids is used to calculate the results. for example, on yours is 10x6. why i can't change it on the new version. i can only change it on version 4.13
Hi Nelca! Thank you always for your amazing videos. I had a question about pole lighting. Is there anyway to use pole or mast lighting in the Building and Outdoor planning mode? Every time I try to insert a pole light, the bulb itself will be suspended in the air but it's not attached to a pole. When I insert the light in the Street Planning view, the pole will show up then. Am I doing something wrong?
Hi Hanna, you need to create a pole when you are at the Buillding Outdoor. You can use cylindrical objects to do that. That is under the Object Tab. Have fun!
you will not add it to the street calculation. first, run the street calc, one its done and you get the right results, then apply the spacing and tilting angle on the outdoor lighting. in the outdoor lighting you can add the objects you want like trees, decorative poles, and other things.
Hello Miss Nelca. Could you please explain how to design a curve road lighting in Dialux Evo? Please And thank you for your videos. Greetings from México
Hello Miss Nelca.. If you are saying..that its not possible to design at curve road or street .then we can consider that curve portion as a straight road...and commonly we will put one luminarry at centre of curveture..???
create 2 roads and add median, then place the luminaire in the median. let me know if u need a video to do it. or watch this video. czcams.com/video/u4A2zpX4JNY/video.html
Dear Nelca, Thanks for guidance and to answer my earlier question. I have to design Street Lighting for a factory and its Residence Colony. I am not able to fine suitable Lighting Catalog from the list. I live in India and our local supplier like Compton, Havells, Wipro are not available. Also please guide how to interpret the result shown after final calculation. Also their are different types of road mentioned, but actual its brief description if available will help to decide thing quickly. is their any additional pack to be downloaded, I have DIALux evo 7.0 installed.
Hi Gary, use the regular dialux if you want this option. I cant find any option in evo where you can edit the lux level requirements. Let me know if you find any. thanks!
Hey thanks for the tutorials, Downloaded .uld files for the luminaires won't open when I click on them and they won't transfer the luminaire into dialux. Can I fix that somehow?
hello miss nelca i need this software for to give the halltown a photometric calculation for residence habitation i download the programm and i follow all instruction on your video but the problem is : i have a plan on autocad when i import to dialux i see the litlle icon on the left but in space work nothing i dont find my plan for inplanting the luminaires on street ?if you think have a solution or any advice will be welcome have a good day
hello miss nelca first i want to thank for your support hope you that you will progress on desight lighting so i try all instructions on the video and i dont have the plan draw on dialux i wanna to send you the dwg file for try and i want to know why it s not working on my computer i have win 10 .autocad 2017.dialux evo i you accept send me just your adress mail for to send you the dwg file just to take a look if you can do something for me because i m in trouble with the halltown they wait my response to give them the photometric calculate if you can help me i will be very happy so just what you can do my mailbox adlanegrm@gmail.com hope that you are fine and waiting for your response
We usually run it in straight line first to check the distance, wattage, height or pole, bracket, etc. and if the lighting standards requirements have been achieved, then we will layout it in the curve road using the parameters taken from the straight line. It will then light like area lighting. Then if there are areas that are dark due to curve road, then we will adjust the pole spacing from that area. In short, just calculate it in straight, then layout in CAD, then run another calculation. There is no calculation for curve road, unless other software has this option. Probably like AGI32. I hope it helps!
In indoor and outdoor building how can i get the result of Uo, TI, UL ... ? incase do not use street mode. Because I have to calculate some path in the park.
Thanks, It is always learning to see your tutorials....🙌
So nice of you, Tariq. Thank you too!
A video tutorial very useful, a good explication, with a good comparatives of the differents kinds of lamp that we can apply for a road, I like it.
InstaBlaster...
This is super cool, thanks for all your videos Nelca!
very nice and simple explanation Thank you
Hi Nelca, many thank for your video, well done
Awesome , i was waiting for this from long time .you are the best
Which subject is this, the course?
I subscribed :) big help po talaga sa illumination design namin :) thumbs up!
you are the best
thank you very much this is good explain ....
Nelca your presentation is quite good and clear....but ..is it really necessary to permanent move the image while you are talking......
Very nice videos.
APPRECIATED,THANKS FOR THE VIDEOS!
Great work ,love it.
Though am confused on how to add luminaries libraries to it as mine is empty unlike yours
keep collecting from different manufacturers website
you very very perfect, i come from vietnam
Hi Nelca, In the Active Profile Element, what is the option if the Road Surface is made from Concrete? Should choose CIE C1, C2 or others? the option only Porous Aspalt.
Also what we should choose for Valuation Field. what we should Choose of Illuminance Class? Should M4, C1 C5 or Others?
Hi Wong. You have so many questions and it takes long discussions to answer them. May I request to enroll in my Udemy course "Road Lighting Design Techniques" so you will get all the answers? Thank you!
Below is the link to enroll:
www.udemy.com/course/road-lighting-design-using-dialux-evo/?referralCode=6C150BDEB3270B0A144C
Unfortunately..
hi ma'am, I'm baba from Indonesia I have a question about the road surface, please explain about the standardization of the correct use of the road surface, Thank you mom, may health and safety always be with you ma'am,😊
Can you please make a video on landscape lighting plan
Thank you for everything 🙂🙂
the light does not automatically goes to DIALux after you download it, you have to import it into DIALux. There's so many cuts in your video, trimming also the necessary information confusing the new users of this softwafe.
thanks for share, Nelca. :)
How to set minimum lux level like 10, 20, and how to achieve the set target?
Appreciated !
thank you very match
Great videos. You helped me a lot with my final project. One question Nelca. What am I supposed to do in case of a street light system with a power regulation program? For instance, 2 hours with a 100%, 1 hour 70%, 4 hours at 50%, 1 hour 70% and the last hour with 100%. Am I supposed to meet the minimum illuminations values also during the period with the 50% power? By the way, cool Italian accent. I'm from Spain. Thanks
Hi, in this video you showing normal street lighting design its good, but I need how to design street lighting for the project using CAD/IFC/Revit reference in that particular roads shown in CAD/Revit, Please solve the problem, thank you..
How to prepare elevated roads or flyovers ? Pls prepare one tutorial
Nelca, can we change the calculation grid from 6x12 to 5x17? The brazilian standard is different from EU...
Hey thankyou so much fr the information. It was very helpfull.
By the way i want some guidance to the parameters in the dialux, can you share any documnt for reference?
And also try for street light of 10m height what is the minimum wattage for 15m distance? Consider 7 m width road and 2 cycle lanes.
Video at the top of magnificence .Can you help me in how to connect the LED particle to some sensor
Hi nelca. very good work. why it's not possible to change the number of grids is used to calculate the results. for example, on yours is 10x6. why i can't change it on the new version. i can only change it on version 4.13
Hi Nelca! Thank you always for your amazing videos. I had a question about pole lighting.
Is there anyway to use pole or mast lighting in the Building and Outdoor planning mode? Every time I try to insert a pole light, the bulb itself will be suspended in the air but it's not attached to a pole. When I insert the light in the Street Planning view, the pole will show up then.
Am I doing something wrong?
Hi Hanna, you need to create a pole when you are at the Buillding Outdoor. You can use cylindrical objects to do that. That is under the Object Tab. Have fun!
Awesome
How can you add a 3Ds file to street lighting?
you will not add it to the street calculation. first, run the street calc, one its done and you get the right results, then apply the spacing and tilting angle on the outdoor lighting. in the outdoor lighting you can add the objects you want like trees, decorative poles, and other things.
ok tks!!!
Hello Miss Nelca.
Could you please explain how to design a curve road lighting in Dialux Evo?
Please
And thank you for your videos.
Greetings from México
Hi Braulio, its not possible to create in curve. only straight.
Hello Miss Nelca..
If you are saying..that its not possible to design at curve road or street
.then we can consider that curve portion as a straight road...and commonly we will put one luminarry at centre of curveture..???
Hi Nelca ,,,How to align street light in center of the road, where there is median or seperation in between road. Just like Dubai _ Abu Dhabi Highway
create 2 roads and add median, then place the luminaire in the median. let me know if u need a video to do it. or watch this video. czcams.com/video/u4A2zpX4JNY/video.html
i need tutorial how to edit the lenght street and how to edit the distance of pole to pole. could you help me?
I mean how to edit manually the distance of pole to pole?. Example: pole 1 to pole 2=30m and pole 2 to pole 3=50m
@@alfaqihmulilalbab182 its not possible. u can only have one distance in the calculation
Hi, check this video. czcams.com/video/kiKoRagEa5I/video.html
enjoy learning!
hi can u please explain how to design outdoor and street lighting in same slide thanks in advance
Dear Nelca,
Thanks for guidance and to answer my earlier question.
I have to design Street Lighting for a factory and its Residence Colony.
I am not able to fine suitable Lighting Catalog from the list.
I live in India and our local supplier like Compton, Havells, Wipro are not available.
Also please guide how to interpret the result shown after final calculation.
Also their are different types of road mentioned, but actual its brief description if available will help to decide thing quickly.
is their any additional pack to be downloaded, I have DIALux evo 7.0 installed.
Hi Nelca, how do you select the lux level requirement let say 5lux, 10lux for that particular type of road then later on all pass in the results.
Hi Gary, use the regular dialux if you want this option. I cant find any option in evo where you can edit the lux level requirements. Let me know if you find any. thanks!
Thank you for the response.
How about the wire size? Do we have to consider the voltage drop?
Hi , I am looking to integrate surveillance camera onto this design of street lights. Any thoughts on this idea?
u just need to mention it in your report. not related to lighting calculation
Como diminuir o número de pontos medidos na trama - 12x6 que 72 pontos, gostaria de mudar para 55 pontos?
Darcioni, descobriu? Tb queria saber como faz
@@victorsouzamoreira Ainda não consegui!
@@victorsouzamoreira consegui fazer, me passa um e-mail, que eu te ensino.
darcioni@gmail.com
hello, I can select the length of the road?
How do you set the lenght of the road of 1000m?
Hey thanks for the tutorials,
Downloaded .uld files for the luminaires won't open when I click on them and they won't transfer the luminaire into dialux. Can I fix that somehow?
Try lumsearch.com, Click on the the luminaire and " send to DIALux".
How about roads with curve?
How to model curved road?
WHAT IS THE VERSION OF THIS SOFTWARE?
how to mak export it as DWG file to import my work on autocad
I never tried exporting stree lighting into cad file, i think its not possible.
I di not know how to import lamps
hello miss nelca
i need this software for to give the halltown a photometric calculation for residence habitation
i download the programm and i follow all instruction on your video but the problem is :
i have a plan on autocad when i import to dialux i see the litlle icon on the left but in space work nothing i dont find my plan for inplanting the luminaires on street ?if you think have a solution or any advice will be welcome
have a good day
chek ur scale
how much does it represent the 1/50 scale on dialux ???have an idea ??
czcams.com/video/dFb2N5WfedA/video.html
czcams.com/video/3K9tiHq__94/video.html
hello miss nelca
first i want to thank for your support hope you that you will progress on desight lighting
so i try all instructions on the video and i dont have the plan draw on dialux
i wanna to send you the dwg file for try and i want to know why it s not working on my computer
i have win 10 .autocad 2017.dialux evo
i you accept send me just your adress mail for to send you the dwg file just to take a look if you can do something for me because i m in trouble with the halltown they wait my response to give them the photometric calculate if you can help me i will be very happy so just what you can do
my mailbox adlanegrm@gmail.com
hope that you are fine and waiting for your response
Or Electrical engineering?
how to make a street lighting design with curve roadways?
We usually run it in straight line first to check the distance, wattage, height or pole, bracket, etc. and if the lighting standards requirements have been achieved, then we will layout it in the curve road using the parameters taken from the straight line. It will then light like area lighting. Then if there are areas that are dark due to curve road, then we will adjust the pole spacing from that area.
In short, just calculate it in straight, then layout in CAD, then run another calculation.
There is no calculation for curve road, unless other software has this option. Probably like AGI32.
I hope it helps!
Thanks
In indoor and outdoor building how can i get the result of Uo, TI, UL ... ? incase do not use street mode.
Because I have to calculate some path in the park.
Guys i just ended up here, is this civil engineering??