150cc Go Kart Drive Belt Replacement
Vložit
- čas přidán 10. 09. 2024
- How to replace a drive belt on a 150cc go kart.
For more info visit www.gopowerspor...
#gopowersports
~-~~-~~~-~~-~
Please watch: "How To Make Your Coleman CT100U Minibike Faster!"
• How To Make Your Colem...
~-~~-~~~-~~-~
What size is the belt ?
Great info thanks guys for I had no clue how to fix it but watching this helped big time
your video was spot on. Thanks for making it easy and informational.
Your magic wand works great. You point and wave and someone else takes the part off. Where'd you get such a device?
Taking the cover off should have been first
The belt on mine is a smooth v groove belt (Goodyear B26/ 5L290 it’s 29”) Doesn’t have the teeth like yours…. I ordered the same smooth belt. Should I put one like in your video on instead? Thanks
Very helpful guys, thank you very much
Is it possible to strip the spline? Because wii go to take off on my buggy it slips and jerks very bad!
How do you get the lock washer off??
Shop Replaced a shredded belt for me. Never had broke belt before so original belt that broke. Shop Put new belt on. I picked it up. when i got home it started run what felt in a lower gear for about 10 min. Reved up. Then it shreaded the new belt. Its that a possible clutch problem? wrong size belt?
any input would be appreciated.
Thank. I just finished mine
Thanks, very comprehensive. ..
I know it's kinda randomly asking but do anybody know a good site to stream new tv shows online ?
@Valentino Ben i watch on FlixZone. You can find it on google :)
@Max Nelson Yup, been watching on Flixzone for years myself :)
@Max Nelson thanks, I went there and it seems like a nice service :) I really appreciate it!
@Valentino Ben glad I could help =)
Do you have an opinion on witch rear clutch to purchase. There appears to be a large price difference. As low as 80 and as high as 300 direct from dealer
I got a howhit gy6 150cc motor that I can't get running. Have any suggestions? It is on a tomberlin crossfire 150
So what does the blue mean…. Cuz I just picked up a used one and it’s all blue
He should have showed the video after you started it I wanted to see what the Belt look like how much slack was in it
Great video thanx man !
Great video can you do a video same engine but with a kick starter.
I have a kandi 150 gka2 with gy6 motor ,I was driving the go kart and something pop and now the go kart don't move just accelerate ,don't go forward and reverse, you think this could be the problem, help
Yes 99percent
How often should these belts be replaced? I've had my ASW go kart for 5 years and haven't changed the belt yet.
+David Knowles You can pull the cover and eyeball the belt. If it is worn on the edges it's time to replace. If the wear is deep enough it will affect your top speed.
While you are in there be sure to note the size of the belt so you can order one to keep as a spare. If they fail they come apart so spectacularly you would no longer be able to read the numbers.
@@fratermus5502 spot on about noting the right size belt BEFORE you need it! Broke supercharger belt on mustang and spent few minutes walking up and down the road picking up pieces to try and find number on it.
where can i get the rollers in the variator? mine are worn out and have flat spots on them. thanks
Ebay
How do I get the variator off without a impact
I broke mine trying it without a impact. Use a impact!
having a problem with my kart I can't get it to drive forward it will go in reverse but not forward there's like I skipping sound I have replaced the clutch belt and variator and nothing go in reverse just fine Plez Plez help me thank you
I have pulled the transmission and everything looks fine
im having trouble too. just like you say. i got reverse to work for a while then nothing now.....wierd nosies, i think i am going to get new rear clutch, i think its getting hung
+John Doe I found the problem it's the forward gear I had to gear a hole gear assembly and shift fork gotta pull the transmission
Thomas Neely
Hello i have a kandi 150cc gka2 my start but dont wanna go forward and reverse
How do you get the clutch nut off
What's the size of the belt
I need to know to
Me too .. what size belt ?
Hello do all of them use a belt
My belt was extremely hard to put on. After I finally got it on, the Kandi still won't move, what's up? Am I missing something?
Leper King
Hello i have a kandi 150 gka2 start but dont move what you did to fix it
@@ktrachin14 did you ever get it done ?
Sounds like you put the wrong belt on
I have a question why does mine jump and grab. Kinda feels like it looses tension then grabs. It is getting worse
Check your clutch shoes & drum.
Did you ever find out what the problem was?
Threw a rod this summer so I didn't get a chance
@@jessealexander6127 damn that sucks! I’ve been replaying parts that people have been telling me and still haven’t figured it out! I’m hoping it’s the verater. We’ll see
You have a crossfire
Why is it bad if it has blued? Do I need a replacement?
Overheated.
Warped.
Not rounded any more
What if the pulley washer won’t come off
Would a belt make the cart jump upon acceleration
I see nobody from GoPowerSports cared enough to respond to your question. Tom Stevens has several really good videos that explain and illustrate CVTs. I’m also having issues with lurching or choppy acceleration. Tom’s son explains in one of his videos that flattened variator rollers cause it. Well, I took mine apart today and sure enough they have flat spots. I will order new variator and clutch tonight along with spares but not from GoPowerSports. Tom also sells parts and he responded to my question in less than a day. True business right there. Good luck.
How did you get the cover off?
Austin Kidd you take a screwdriver and hit it with a hammer until it pops off 😆
What is the part number and where do I get the belt
You can find the belt at www.gopowersports.com/150cc-drive-belt-743-20/#aid=2971
You guys do know 200cc and 150cc have the same clutch
What size is the belt?