You just have a friend for life! Thanks to this video I was confident to replace my normal turn lights with dynamic ones. I bought these at aliexpress for13 euro and they are even better visible than the original ones. I do have a 360 deg. camara system and so there are cameraś mounted in the mirror. That was a bit more tricky but not so much that I had to stop. Again: thanks for your video
Thank you so much for this video, without these instructions I would have had a expensive garage bill, but these were great and I could replace smashed Led light, thank you
Nice job man! Much better indeed. 😉 I’m so happy to have found this mod. It works perfectly with the DRL mod from Duncho btw. But no credits to me? 😜 Happy driving my friend. Kind regards
frostsilenec i tipped him well before, shortly after having found and ordered them myself. Welcome to our circle and many thanks D. Love your channel. 😉
I added these to a qashqai, along with the led strip signal lights, they work well together and make the car stand out, you can check it out on my channel.
mine broke after 3~ years, had to buy new-gen ones, as these were "old" with some kind of module inside of cable. so old/bad - something "bulky" on cable, new/better - clean cable with connector imgaz.staticbg.com/images/oaupload/ser1/banggood/images/8E/A6/82ace609-7f38-49ca-8da0-bffb66abd197.jpg , looks like even link in my video is newer now - as cables looks normally.
my qashqai is visia so i have only 4 speakers, and biggest upgrade was android radio - plays even better on replaced speakers or original nissan with connect.. to be honest i dont want touch dashboard too much, iam little bit afraid of new noises from it, iam the lucky one which dont have too much noise from it and lot of guys around have big problems with it..
How did you connect the cable? Could you do a quick video on this. I bought the lights after watching your video and I don't know how to connect it. Thanks
I have a got a 2019 Nissan Qashqai The problem when buying parts for it Though its a J11 if you type the vin number in search you get that its a 2010 modal. On the Vin number on a 2019 Nissan Qashqai such as say this SJNFBNJ11KA304783 the vin say that though it a J11 but it also says it a modal 2019 modal K A 2018 is Vin modal numbered is an I. So a 2019 Nissan Qashqai vin modal number is a K
Is there any issue after start the engine? We did the same but all the turning led flash crazy after installed it. We have temp solution if installed DRL.
no issues, BUT maybe iam different - i`ve already have resistors on front and back turn signals, this circuit and "fast flash" is caused when on whole circuit is bulb broken/doesnt see bulb as led bulb do not have that much power/wats..
@@ericly78 then my question is, did you installed any leds to turn signals to the front or back of car? i got DRL module for dimming from duncho too but not yet installed him..
@@ericly78 how in more detail, "CANBUS" ones, or normal ones and manually added resistor? or just "some" LED bulbs without resistor and you are not aware about canbus?
Hello i already install it aswell and it really looks nice and visible..have you seen this led strip DRL it has double sided tape to put on top of the headlight is it possible if you can do video of that it also becomes turn signal light then turns back to DRL its not that expensive i saw it in ebay thanks👍
@@frostsilenec hi thanks for all the great tutorials but i have question there are new ones available with daytime running lights and ground lichts when you open the car door but the daytime running lights must be connected to the original daytime running lights somewhere under the daschboard do you know where these wires are located i think they are bleu wires but i'm not sure .... and by the way i used your video to install my daschcam with piggybacktail so thanks for that video man man 👍
@@robertdeman9644 i`ve did not played too much with cables in interior, you want to connect some kind of "ambient" lights? or what you want to connect? some lights which are projecting to the floor when you open the doors? sorry did not get it from your comment... and got small update on piggy tail, it should point up if you want to have "insured" both circuits seperately czcams.com/video/mjFRNGpHtvQ/video.html , but no big deal, if you will connect it in "wrong" way, you will just have both circuits on one fuse, which is more safe.. if yout want to support me, please subscribe that is only what i ask for :)
@@frostsilenec no i already have ambient light i installed it with piggybacktail and switch in between but now i have found mirror turnsignal like you have but who olsow have daytime running lights but that means more instalation of cables for example to the interior roof lights but thats no problem, the problem is i have to connect to the original running light of the car and these cables are somewhere under the daschboard, i left a link to CZcams so you can see the new type mirror turnsignal lights
no ideaa now, i think it was torque screw, but you can test it - they are same the ones which holds the mirror - and not that much accesiable and visible, as they are the same ones which holds the LED light - and they are good visible when mirror is taken down.. but nothing special - iam using set of 20~ bits for like 10 euro - and they are enough...
they have new "generation" on aliexpress, maybe cables will fit, if not, its easy to solder it / use small wago lever. its easy to take it out, you just need to take your time, think, have basic tools, and do it with 20 celsia+
You just have a friend for life! Thanks to this video I was confident to replace my normal turn lights with dynamic ones. I bought these at aliexpress for13 euro and they are even better visible than the original ones.
I do have a 360 deg. camara system and so there are cameraś mounted in the mirror. That was a bit more tricky but not so much that I had to stop.
Again: thanks for your video
happy to help!
Thank you so much for this video, without these instructions I would have had a expensive garage bill, but these were great and I could replace smashed Led light, thank you
No need to remove the motor, the 2 screws are accessible without 👍
Thanks! This video (together with the workplace manual) really helped us out to install the new turn lights. Works perfectly!
please subscribe, that will help me :)
Thanks for the video, my car failed MOT on wing mirror light not working , ordered and watched your video to fit it, all passed for another year!
good to hear that this still able to help to someone :) , enjoy
Great work! Thanks for all your tutorials!
I really like the "star wars" plaster :D
Thanks a lot! Very helpful! Befor I found this video, I was about to crack mirror panel
please subscribe, that will help me :)
Nice job man! Much better indeed. 😉 I’m so happy to have found this mod. It works perfectly with the DRL mod from Duncho btw. But no credits to me? 😜 Happy driving my friend. Kind regards
fixed that in description now, big thanks to you as well, found them based on ping from duncho and he probably found that on your youtube :)
frostsilenec i tipped him well before, shortly after having found and ordered them myself. Welcome to our circle and many thanks D. Love your channel. 😉
@@LaPalmeraie0032 same on yours :)
@@frostsilenec czcams.com/video/3kO4W8UokYc/video.html
I added these to a qashqai, along with the led strip signal lights, they work well together and make the car stand out, you can check it out on my channel.
Thank you for your help
mine broke after 3~ years, had to buy new-gen ones, as these were "old" with some kind of module inside of cable. so old/bad - something "bulky" on cable, new/better - clean cable with connector imgaz.staticbg.com/images/oaupload/ser1/banggood/images/8E/A6/82ace609-7f38-49ca-8da0-bffb66abd197.jpg , looks like even link in my video is newer now - as cables looks normally.
Good guide.
great video
how to replace the front turn light and what the type i need to put?(link please aliexpress)
thanks
Can you make a video how to replace the tweeter speakers in the dash board...just in case your upgrading your speaker system like bose or focal thanks
my qashqai is visia so i have only 4 speakers, and biggest upgrade was android radio - plays even better on replaced speakers or original nissan with connect.. to be honest i dont want touch dashboard too much, iam little bit afraid of new noises from it, iam the lucky one which dont have too much noise from it and lot of guys around have big problems with it..
How did you connect the cable? Could you do a quick video on this. I bought the lights after watching your video and I don't know how to connect it. Thanks
What colour to what colour did you use.
I have a got a 2019 Nissan Qashqai The problem when buying parts for it Though its a J11 if you type the vin number in search you get that its a 2010 modal. On the Vin number on a 2019 Nissan Qashqai such as say this SJNFBNJ11KA304783 the vin say that though it a J11 but it also says it a modal 2019 modal K A 2018 is Vin modal numbered is an I. So a 2019 Nissan Qashqai vin modal number is a K
Привет. Извиняюсь за нескромный вопрос, Вы болеете Астмой ?
Is there any issue after start the engine? We did the same but all the turning led flash crazy after installed it.
We have temp solution if installed DRL.
no issues, BUT maybe iam different - i`ve already have resistors on front and back turn signals, this circuit and "fast flash" is caused when on whole circuit is bulb broken/doesnt see bulb as led bulb do not have that much power/wats..
frostsilenec there is no issue if installed DRL with turn LED stripe...we tried to installed the resistors for the mirror led but no use
@@ericly78 then my question is, did you installed any leds to turn signals to the front or back of car? i got DRL module for dimming from duncho too but not yet installed him..
frostsilenec yes, i installed the turning led for the rear only.
@@ericly78 how in more detail, "CANBUS" ones, or normal ones and manually added resistor? or just "some" LED bulbs without resistor and you are not aware about canbus?
Hello i already install it aswell and it really looks nice and visible..have you seen this led strip DRL it has double sided tape to put on top of the headlight is it possible if you can do video of that it also becomes turn signal light then turns back to DRL its not that expensive i saw it in ebay thanks👍
that is the line which i will not cross - they will reject my car on technical check, that is too much and not approved for road..
@@frostsilenec hi thanks for all the great tutorials but i have question there are new ones available with daytime running lights and ground lichts when you open the car door but the daytime running lights must be connected to the original daytime running lights somewhere under the daschboard do you know where these wires are located i think they are bleu wires but i'm not sure .... and by the way i used your video to install my daschcam with piggybacktail so thanks for that video man man 👍
@@robertdeman9644 i`ve did not played too much with cables in interior, you want to connect some kind of "ambient" lights? or what you want to connect? some lights which are projecting to the floor when you open the doors? sorry did not get it from your comment... and got small update on piggy tail, it should point up if you want to have "insured" both circuits seperately czcams.com/video/mjFRNGpHtvQ/video.html , but no big deal, if you will connect it in "wrong" way, you will just have both circuits on one fuse, which is more safe.. if yout want to support me, please subscribe that is only what i ask for :)
@@frostsilenec no i already have ambient light i installed it with piggybacktail and switch in between but now i have found mirror turnsignal like you have but who olsow have daytime running lights but that means more instalation of cables for example to the interior roof lights but thats no problem, the problem is i have to connect to the original running light of the car and these cables are somewhere under the daschboard, i left a link to CZcams so you can see the new type mirror turnsignal lights
@@frostsilenec czcams.com/video/3kO4W8UokYc/video.html
👍👍👍
Hello just want to ask what size of screw did you use is it torque screw driver?or allen
no ideaa now, i think it was torque screw, but you can test it - they are same the ones which holds the mirror - and not that much accesiable and visible, as they are the same ones which holds the LED light - and they are good visible when mirror is taken down.. but nothing special - iam using set of 20~ bits for like 10 euro - and they are enough...
Hi can I ask what is the orange stick you are using?
Search for Plastic Auto Dismantle Tools , on ebay / aliexpress , using them almost every month on various stuff around car.
What type of clips are they? How did you get the clip out is it a clasp?
they have new "generation" on aliexpress, maybe cables will fit, if not, its easy to solder it / use small wago lever. its easy to take it out, you just need to take your time, think, have basic tools, and do it with 20 celsia+
@@frostsilenec Thanks I managed to replace mine and you helped me to do that. 👍
@@Jj-ff9vq happy to hear that this channel still helps, but no more content, QQ is sold now