Can-Am Ryker Chaser LED Underglow Lighting Kits
Vložit
- čas přidán 17. 04. 2020
- 🛒 Can-Am Ryker Chaser LED Lighting Kits: www.slingmods.com/canam-ryker...
Developed from the ground up, our TricLED Chaser LED underglow lighting kit for the Can-Am Ryker & Ryker Rally is hands down the most eye catching LED product we currently offer for this bike. The included RGB Chaser LED lighting strips use proprietary LED's with a protective water proof & UV resistant smoked tube coating that keep your LED strips flexible, but also safe guard against water, dirt and grime. The circuit board has been custom programmed from scratch to offer 60 unique flashing sequences and patterns including a USA flag color scheme. The control harness and receiver have been designed to pull minimal power so that you can rest easy about running your light kit at bike nights or rally's. This Kit#1 Chaser Kit accents your Headlights, Front Grille & A-Arms & includes a 4:1 splitter that allows you to expand your light show into our other Chaser "add on" kits for the Ryker. If you're looking to stand out from the crowd this is the LED Lighting kit for you. - Auta a dopravní prostředky
that red and black is so sick looking. that is exactly how I would have it.
We just installed ours can't wait to put on road
Looks good 👍
NICE🔥
🛒 Ryker UnderGlow Kits are available here: www.slingmods.com/canam-ryker-underglow-lighting-kits
📌Auto Shut OFF Timer Explanation: At 2:39 in this video we explain the 10 minute timer function. For additional clarity, this timer feature does not turn off the UnderGlow Kits after 10 minutes of no remote use. It tells the module box to stop looking for the remote control only when the lights are already "off". This reduces the amount of parasitic draw on the battery, preserving battery life when the underglow kits are not in use.
Do anyone kno if the signal box stay blinking red under the hood for your ryker
I wish I would have seen this video before I attempted to install my kit. This is much easier than the instructions it came with. Also my kit did not come with all these extension wires.
Hello Kymeiko, we have installation videos for a good portion of the products we carry. Our customer service team is always available for you as well anytime you need assistance. www.slingmods.com/index.php?route=information/contact Thank you!
Is there an official method/procedure to add multiple 1-2-3 stage kits or light strips if I wanted more lights in the system? Ex lights on both front control arms and 2 lights on the swing arm.
Hello Adam, the current Ryker Chaser module was only designed to handle the current load of up to 4 Chaser Kits, as we had plans to launch a 4th kit down the road. If you wanted to add another set of front a-arm strips we could do that.. but we'd need to get you some 1:2 power splitters. If you could please send us a support ticket here... my team will be happy to assist you with that special request: www.slingmods.com/index.php?route=information/contact Thank you!
Where can I purchase battery post negative and positive bracket to add multiple rings?
Hey Tank, we offer a 4 post battery from Motobatt here: www.slingmods.com/canam-ryker-motobatt-12v-agm-replacement-battery-upgrade
Is there any memory function built into this? For example, if I set the lights to green and power off the bike, will they be green the next time I turn the bike back on?
Yes. It will remember the last light setting before you turned off the system via remote.
How good is the glue on these led strips is it the same as what the use for car trim? Dont want to loose a light
Hello, these strips use 3M VHB backing tape.. which is pretty strong stuff. The most important thing is to properly clean the surface area with rubbing alcohol to make sure it's free from any oils or contaminants prior to adhesion.
I can add these lights, flood lights and speakers and it won't be too much for the battery?
We're running that and more! The only time you'll need to monitor is parked with the ignition off. We have a shut down feature on these for that reason.
I've gone to my garage twice to see my chaser lights on with the remote nowhere close in site..can you help, this seems odd and not trusting them now. Also do they cut off after 10 minutes with no power on bike?
Hello Rodney, please reach out to our customer service team and they'll be happy to assist you with any questions or concerns. You can submit a support ticket here: www.slingmods.com/index.php?route=information/contact Thank You!
Bruh is there a way to get kit 1&2 to blink and turn red with the blinker and brakes if not can y’all make something that does at least for kit 2
This will most likely be an upcoming feature for our Chaser Wheel Light Kits. This is not currently available for Kits 1 & 2.
Before installing check the laws in your area. I looked into this for my car a few years ago and, at least here in Jersey, you can get jammed if you are driving while illuminated. It has to do with their auxiliary lighting regulations.
Hey James, that's 100% accurate. This mod is intended for use while parked.
I bought a ryker this weekend but the last owner lost the control for the led lights, what can I do?
Congrats on the new ride David. Here's a link to grab a new remote: www.slingmods.com/chaser-programmable-remote-control-tricled and here is the pairing instructions: www.slingmods.com/pdf/tricled-chaser-remote-pair-instructions.pdf
When riding does it turn off after 10 minutes or when it’s off, not running that it turns off after 10 minutes?
The Ryker battery is not that great. So the system has an "auto" shut off feature only when the engine is "off". That will turn off the lighting kit if the module box does not receive a remote control command after 10 minutes. This is to ensure that you don't leave the lighting kit on at a show or bike night and drain your battery.
Can you safely install the lights if there is already a skin on the ryker without tearing the skin?
Hello Bilal, what do you mean by skin?
can you wire it to the usb in the frunk for power?
Hello John, this underglow kit pulls quite a bit of current. We'd recommend going to the battery for power on this one.
Can I wire this to the accessory port so that it all turns off when the Ryker is off?
Hello Chris, unfortunately not on this one. This mod will exceed the current limitations of the "accessory port" and pop that fuse. This one needs to be wired directly to the battery for power.
I got this kit a few month ago an they just stop working can you guide me to how to fix it
Hello Frank, our Customer Service Team is standing by and happy to assist. www.slingmods.com/index.php?route=information/contact
How many accessories can you hook to one battery
Hello Alex, that would depend on what accessories you're hooking up. Things like Air Horns, etc. will draw much more current than LED strips.
My under glow lights won’t turn off with the other ones, and sometimes they don’t change colors when i press the B button on my remote, why is that?
Hello, If you would kindly submit a support ticket to our customer service team, we're happy to assist you. You can do that here: www.slingmods.com/index.php?route=information/contact Thank you!
You said “if you plan on running directly to your battery for power”. What’s the alternative for powering all 3 kits simultaneously?
Hello Daniel, the alternative would be to run the power and ground wires on the chaser module box to our Ryker Fuse Block Kit here: www.slingmods.com/canam-ryker-12v-accessory-fuse-block-show-chrome Thanks for watching!
@@Slingmods Thanks man. Which way won’t void my warranty if anything were to happen? Also, does the fuse block have less of a chance of draining battery and will it still shutdown after 10mins of no remote signal is sent? I have all three kits but haven’t installed yet
@@danielragland2927 Hello Daniel, No problem! I wouldn't say the bike warranty is in question at all on this mod. If you mean product warranty.. either is fine. You're either powering the Chaser's directly from the battery or powering them through the fuse block which gets power directly from the battery. The shutdown feature will work the same in either scenario. I would however suggest you run our MotoBatt AGM battery upgrade with these lighting kits.. The Motobatt battery is awesome in comparison to the stock battery and is simply a direct replacement to your stock battery. Thanks!
Does this come with the extensions and splitters?
Hello Darrell, the main Underglow kit #1 does. Kits #2 and #3 are add on kits to kit #1. The module box also includes an extra port for the chaser wheel light kit we have in development which will be kit #4.
Mine stop working already I hope you guys get it right i spend alot of money with you please help
Hello Albert, happy to help you out sir. Please submit a support ticket below if you haven't already so we can gather more information on the issue. We'll get you taken care of. www.slingmods.com/index.php?route=information/contact Thank you!
Looks nice but I would prefer get it done
Absolutely. If you're not comfortable installing this yourself. The video would be a great tool for your installer as well. Thank you!
need links to purchase all three kits
Here you go Renata: www.slingmods.com/index.php?route=product/searchcanam&vehicle=1&search=ryker%20chaser%20underglow Thank you!
Are you making one for the F3
Hey Dave, it's not on the current project list.. but something we'll consider. Thank you!
I’d like to see an F3 one as well
How do you get the lights to just show one solid color
17:57 You have to Push the A button to cycle through all the Chaser modes, until you get back to single color LED's.
@@Slingmods but will not stop dancing, won't no movement just color
@@timothyglover7447 There's like 80+ sequences. Keep clicking the A button on the remote until you get to the still colors. Thx!
@@Slingmods thanks, all good 👍
Were can I find the light to put on it
They're available here: www.slingmods.com/canam-ryker-underglow-lighting-kits Thank you!
If I took a shot every time Brandon says “any and all moving parts“….. I’d have alcohol poisoning.
LMAO!!
How much the lights cost
www.slingmods.com/canam-ryker-underglow-lighting-kits
ONE THING you forgot to mention or show is after having 2 large wires running out from under the glove box NOW the glovebox no longer lays flat and the pins will now not fit thro the side panels into the holes!
Any response on this one ?
@@phi2263 watch my video where I did it here. Watch at the 5 min mark.
czcams.com/video/mH0sGiJrGaY/video.html
You never install led strips where you can see the actual leds. You want them hidden to only see the "glow". And in turn you dont see the non-lit strips in the daytime. Also why not put the headlights strips on the other direction and have the plug ends closer to the front connection? Or buy a light kit that allows you to plug strips into each other and saves on having to run long wires all back to the main hub.
You can absolutely mount them where you'd like as long as the extensions reach one another. The led strips are encased in a black smoked tube so they'll blend well with the black plastics during the day.
This bobble head is cringe af
Lol. I have no idea what that means.