saludos desde Guadalajara México, te puedo hacer una recomendación, ese tipo de reflectores convertidos a leds yo los hago les quitó la placa LED que traen y hago una placa de leds RGB parecida a la tuya, con la diferencia que no debes de dejar los cables tan largos, te recomiendo usar una tarjeta PCB perforada y los acomodas en forma escalonada una vez soldados todos los cables unes con un solo cable todos los azules, luego todo los rojos luego todo los verdes y al final todos los de 12v y así solo te quedan 4 cables solente y no tanto cablerío que al final te quedo si gustas te puedo mandar imágenes o vídeo de como los hago y como quedan y si usas un controlador con sonido también funcionan con la música,
@Iulian Man The reflector is rendered waste. Instead of putting many strips, just put one strip in the bulb position so that the reflector does the magic.
You can also make this into broken led panel work light pretty easily. Showing controller in panel would been possible with tight fit and it could been put into motion sensors box, but i ended up just taking cover from other lamp and bolting it on back. Optionally you could use electric crossing box on back to store it.
Very Nice RGB Disco Light! RGB means red, blue and green LEDs. Thus product combines three colors to produce over 16 million hues of light. I like this video because the way you prepare the unit, it seems in a step by step process that we can follow. Thanks for Sharing.
I’m new to led projects, but am interested in doing this for my final in my tech theatre class. Could someone tell me the materials used, and where to find? Maybe even some tips if you’ve done it before?
why not building it way smaller using the reflector of the original lamp :o ? wouldnt the light get spread better then with the leds build angle ? + wouldnt some leds without silicone covering work with an lower angle = higher brightness ? just a thought :) have a good one o/
Creo que hubiera sido mejor, más sencillo más estético y sin gastar tanto cable, conectando cada tramo en serie y al final solamente el último tramo conectarlo al controlador y la corriente. Eso te hubiera ahorrado hasta tiempo. Pero bueno igual funciona, es buena la idea. Saludos.
cómo consejo en serie no sería muy práctico por qué si te falla una línea de enmedio ya no funcionarían los demás en cambio así en paralelo si te falla una serie siguen funcionando los demás
Hello thanks For DMX controller or music enabled construction remains the same. You need to remove the remote controller and the 12v transformer to connect directly to DMX.
Hi there. I was watching this video and it came when you were attaching those wires. I paused it and wrote this comment. It's very much confusing what you did with those wires. Can you explain it a little? And another thing, what was the sheet or plate or whatever on which you placed those led strips. It's very clean work bro... Well done 😘
Hello Thanks It is an aluminum plate for better cooling. And for wires I can send you a drawing with them by mail. If you want, write me a mail address.
Hello, congratulations for your tutorial and your channel still interesting to follow. According to you is it possible to control this projector in DMX rgb by adding components, do you have an idea, see even a tutorial? Thank you. cordially
U can hook it up to something like this to make it dmx CHINLY 12 channel DMX 512 RGB LED strip controller dmx decoder dimmer driver DC5V-24V 5A/CH (12CH DMX 512 Decoder) www.amazon.com/dp/B01MSGZMOR/ref=cm_sw_r_cp_apa_i_K-9FCbNX91K6Y
WOOOOW, IT'S, RARE, VIDEO, GOOD LUCK
Thanks!
Brilliant video, never seen led strips being taken apart before this is super cool thank you for this video
Thanks!
Sir super led idea ,,👌👌👌
Best Work 👍👍👍
Thanks!
saludos desde Guadalajara México, te puedo hacer una recomendación, ese tipo de reflectores convertidos a leds yo los hago les quitó la placa LED que traen y hago una placa de leds RGB parecida a la tuya, con la diferencia que no debes de dejar los cables tan largos, te recomiendo usar una tarjeta PCB perforada y los acomodas en forma escalonada una vez soldados todos los cables unes con un solo cable todos los azules, luego todo los rojos luego todo los verdes y al final todos los de 12v y así solo te quedan 4 cables solente y no tanto cablerío que al final te quedo si gustas te puedo mandar imágenes o vídeo de como los hago y como quedan y si usas un controlador con sonido también funcionan con la música,
Ok Thanks!
@Iulian Man The reflector is rendered waste. Instead of putting many strips, just put one strip in the bulb position so that the reflector does the magic.
It may be ok as you say
But so, it is brighter
You can also make this into broken led panel work light pretty easily. Showing controller in panel would been possible with tight fit and it could been put into motion sensors box, but i ended up just taking cover from other lamp and bolting it on back. Optionally you could use electric crossing box on back to store it.
गजब यार
Very Nice RGB Disco Light!
RGB means red, blue and green LEDs. Thus product combines three colors to produce over 16 million hues of light.
I like this video because the way you prepare the unit, it seems in a step by step process that we can follow. Thanks for Sharing.
Thank you very much!
At back of halogen that is transformer ???
I’m new to led projects, but am interested in doing this for my final in my tech theatre class. Could someone tell me the materials used, and where to find? Maybe even some tips if you’ve done it before?
materials used -MOBILE HALOGEN PROJECTOR 500W BLACK , Aluminum plate, rgb led strip, controller rgb.
12v transformer
why not building it way smaller using the reflector of the original lamp :o ? wouldnt the light get spread better then with the leds build angle ? + wouldnt some leds without silicone covering work with an lower angle = higher brightness ? just a thought :) have a good one o/
The original reflector does not have much space to put so many LEDs.
But they are not bad ideas.
Thanks!
nice.................good jobs
Thanks!
Thanks, Nice sound, and video.
THANKS!
You too have a cool channel.
what kind of music do you play? you can drop the link and the track name.
Hello
Music is from youtube free music.
It's called TFB3
...off to the work bench. I have a S-load of LED tape and a few old Work lights...., and I could use a few Wash lights at the club I work at
Good luck to do a good job
Creo que hubiera sido mejor, más sencillo más estético y sin gastar tanto cable, conectando cada tramo en serie y al final solamente el último tramo conectarlo al controlador y la corriente. Eso te hubiera ahorrado hasta tiempo. Pero bueno igual funciona, es buena la idea. Saludos.
yes it was good as u say.
cómo consejo en serie no sería muy práctico por qué si te falla una línea de enmedio ya no funcionarían los demás en cambio así en paralelo si te falla una serie siguen funcionando los demás
Such an amazing idea love it a lot, however personally I would have left the strips of tape separate so you could chase between each line of tape
Thanks
Yeah, and you have a good idea.
Nice
Looks like a cool project that even I’m capable of completing but it needs to be able to connect to a DMX controller or music activated.
Hello
thanks
For DMX controller or music enabled construction remains the same.
You need to remove the remote controller and the 12v transformer to connect directly to DMX.
can you make one for me?? rly cool light
In what country are you.
Exelente me gusto mucho la leds no con sumen energia solo las luces antiguas cin sumen mas poreso se crearon las lamparas led y las bombillas de leds
Nice 👍👍👍👌👌👌
Thanks!
im sure you can buy something similar on ebay for about 15 quid ?
I do not know
Hi
Good lak
a Laet kitna ka he
Excellent project, thanks for sharing! What is the white wire that you left hanging in the front?
The remote antennae
Thanks!
for the remote control .(antenna)
nice 👍 do you have any links where I can find these type of fog cases?
Hello .
Thank you
From a building materials center in your country.
Nice! Is it efficient at greater distances? Like an actual projector?
Hello
Yes, the light reaches even bigger distances, but not in a fixed spot, it gives light all over the room.
কি কি পার্স লাগবে এটি তৈরি করতে,, আর এটি কি বিদ্যূত দিয়ে জ্বালাতে হবে
???
good work bro
THANKS
Can I get the details of the things wt u have used ....
Very nice
Thanks!
Wow good job
Thanks!
mast hai very nice
Thanks!
Hi there. I was watching this video and it came when you were attaching those wires. I paused it and wrote this comment. It's very much confusing what you did with those wires. Can you explain it a little? And another thing, what was the sheet or plate or whatever on which you placed those led strips. It's very clean work bro... Well done 😘
Hello
Thanks
It is an aluminum plate for better cooling.
And for wires I can send you a drawing with them by mail.
If you want, write me a mail address.
Iulian Man Thanks bro, dr.doom8bp@gmail.com
with pleasure .
I'm sending the mail now
*Aluminium
Sorry
Nice Idea
Thanks!
Nice video
Thanks!
Nice 👌👌👌
Thanks!
Woooooooooooo brooooooo
Thanks!
Nice light
Thanks
Price btao bro
price kato porby?? R ki ki parce lagby banaty pls??
I'm sorry but I don't understand what you mean
Hello, congratulations for your tutorial and your channel still interesting to follow. According to you is it possible to control this projector in DMX rgb by adding components, do you have an idea, see even a tutorial? Thank you. cordially
Thanks!
yes you can control it with a dmx but don't put that controller inside anymore. Must be directly attached to the dmx.
Sarebbe meglio inserire il trasformatore nel faro facendo uscire solo la spina a 220 volt
A good idea
thanks!
bhut acha
lovely
Гап нест 👍👍👍👍👍👍👍
may bhi sikna chahta hu ji g n
Iska charger kharab ho jaye to kya kare
Hello
Sorry google translation is not good and I do not understand what you mean you can write in English so I can answer you
Que maravilla de luces RGB muy potente completas excelentes amigo
Thank you very much!
Como puedo conectar una lámpara modelo 19385_4
Tell also what are you doing
I'll try in the future
यह सोडियम मार्केट में कितने की मिलेगी
???
wow very very good
Thanks!
sir iska circuit kaha se mile ga only circuit
sorry but I do not understand what you mean
aap ko chahiye kaya ??
czcams.com/video/Evll0wNwIx4/video.html
good.. like it
Thanks!
I also made a light panel with control from the phone.
But it doesn't Support DMX
yes
U can hook it up to something like this to make it dmx
CHINLY 12 channel DMX 512 RGB LED strip controller dmx decoder dimmer driver DC5V-24V 5A/CH (12CH DMX 512 Decoder) www.amazon.com/dp/B01MSGZMOR/ref=cm_sw_r_cp_apa_i_K-9FCbNX91K6Y
How much it will cost????
Hello
This varies from country to country how much will cost the components
good job man, nice stuff!!
Thank you!
Good vedio
Thanks!
Amazing wow
Thanks!
From where the raw mettirals obtained.give address..
From the local electrical shop.
Thats a really good idea, but the soldering solution is worst.
Yes, you are right
Thanks!
Good
THANKS!
Like it
Super sir
Thanks
its nice and amazing keep it up
Thank you!
Yo ya lo ise pero los puentie y sale mejor es mucho así como los isistes carnal
Roberto Franco .
Roberto Franco
कितने वोल्ट पर चल रही है
rgb controller works with 12V
Super
Thanks!
Video is best
Thanks!
Mujhe led panal chahiye
👌👌👌👌👌👌
Sahe khel gya bhai
???
Which watt light sir
I have done this project for some time, I think 24w
AKHIL SUPER MARCHI
Mind blowing technic
By the way nice video with awesome music !!
What's the name of music
Thanks!
Music is from youtube free music.
It's called TFB3
@@IulianMan But what's the name of music !! So that I can search it?
@@deviduttapattanaik3500 TFB3
Supar
Spr
???
Cool I in joyed watch this and real like that light. U should send it to me bc I really really like it a lot.
Thanks!!!
Which country you live in??
That music awesome
Super hai
Thanks
Super .very very super..
Thanks!
👌 nice
THANKS!
Sir kitane me mil sakti hai??????
Please write to me in English, I do not understand
jajaj q espectacular de 10 amigo exitos
Thanks!
Took a long time anyway its cool
Thanks!
Cool👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Acaso no conocen los par leds?...
I do not understand what you mean
Rate
What's DIY?
really???
Good idea thank you
thank you 2
А при чём здесь "Диско"? Тупо воткнул ленту, просто аккуратно… я думал, схему спаяет или на крайняк готовую возьмёт, чтобы под музыку работала…
To make light react to music simply change the controller with one that reacts to sounds.
nice
osm bro
Send me one please😭
Sorry but I can't
e mesmo necessário soldar cabos ?
No need