I'm a residential guy also, do a lot of spraying with the FFLP and FFT over the years and I've always thought I could do a car this way. As the finish is so good from those tips.
Did the same thing years ago. We used an airless sprayer with a new 515 tip and used industrial enamel and paint thinner to paint a VW bug. Industrial enamel is machinery paint and cheap but also very hard and oil resistant. Turned out great.
Thanks so much for all the feedback! Just to remind the technical detailed people, I am not an automotive painter. I had great results from this project on this fleet van. I am a commercial and residential painter and may not have done this job to the standard of those of you in the vehicle painting industry. Its fun, corny, and worked well!
Lmao ..... ive been wondering if can use that pump, dude u just saved $700 paint job I'm gonna do this to my girls car before mine though🤪🤜🤛🤙🤙🤙🤙🤙🤙🤙Good job bro! Aloha
i use to paint cars for a living,specificly jaguars,,, we used a metal to paint primer called etch,,it stopped the flash rust ,, i dont think you had to wait 6 hours in between coats if the temp is over 75 degrees,,,, when i saw what your were doing i thought it was going to be one messed up job, to my surprize your painting job , rivaled any industrial job, way to go and thanks for sharing
Awesome video man! You have an awesome sense of humor. I enjoyed the entire video. Thanks for the info as well, getting ready to use my airless to paint my tool truck now 👍
I've been spraying cabinets,and all sorts of stuff for 25 years,I'm sure I good pull off a pretty slick paint job on a car with a airless and a 209 or 310 tip.
So much fun doing this video in a sarcastic kind of corny way. I am stoked to see it circulate a bit! anything is possible as far as do it your selfers.
Bud, best van paint video on the tube, I couldn’t find any info on using an airless sprayer with certain paint, and you are an actual painter so you eased my mind a lot mentioning the 410 tip. I have a small airless that I will be spraying an Astro in rustoleum tractor paint, Ford grey color. Knocked it out of the park my dude, thank you.
I always wondered if I could use my Wagner pro airless to spray a car. Looks like it came out very nice. What do you think compared to air compressor spray finish?
This might be 8 years old but it just helped me make my decision lol. I have a nova 390pc. I'll be painting my gmc 2500 van soon. I'm a Sherwin Williams guy too. What do you think the best to use these days?
Travis Benfield that’s wrong respirator for paint fumes, correct one has cotton like pre filters, then charcoal canister. That mask is appropriate for say concrete dust stuff that is a dust and fumes that are not harmful. That mask will keep the paint out of your noise hairs but not the toxic fumes.
You need to take a closer look, those are fume filters NOT just dust filters, don't let the pink covers fool you. I just bought the same ones and they are multi- gas filters w/ pink covers.
Lite coats, fine tip, high pressure, and lots of dry time between coats. At least a night. Better more coats than less heavy ones for sure. Thanks for the comment! More fun vids to come.
Products for the most part are losted in the video, what are you looking for specifically? Most of the work is in prep, and for overkill rust treatment in any areas that need it. Any industrial steel metal paint you can spray will work. Do not go for coverage! Do as many coats as you need. Too much material will sag on smooth vertical surfaces.
itzPlayTime its holding up really well and is a fleet van now. I just used sherkem right out of the can and thinned it a bit. No other additives. I would do lighter coats and more of them. I had a couple sags I'm the heavier areas nothing super noticeable.
I took a trailer out of the back yard and rubbed a fence post pretty hard and was blown away that it only left a scuff haha! Still using the van in our fleet.
i admit the final utcome suprisingly looked pretty decent onVideo , i sprayed a VintagecSports Car with a Turbine HVLP spray unit and Dupont two Stage Automotive Paint with IMO got a Professional looking result with my Rig happens to be a older CambellHausefeild unit they don’t sell any longer the Gun is a AllMetal Gun and canister ( Aluminum) that cleans up very Well and Resembles a Auto Body Binks Gun with a siphon Canister below the Gun FYI one of my Uncles actually Developed and Patented the Reversible Self Cleaning Airless Spray Tip and started the Titan Paint Sprayer Company he made his money and sold out years ago Currently i beleive it’s all owned by Wagner now and has been for a few years Painting isn’t my trade i’m a retired ProfessionalWoodworker and i bought the Turbine HVLP for finishing Furniture and Cabinetry it was also a good portable unit to do refinishing on Jobsites if needed we did a lot of Lobby Paneling , and ArchitectualMillwork that sometimes needed touch ups with Conversion Varnish with minimum Overspray and Set up / Breakdown time so that CampbellHause Feild Turbine was the one i liked at the time and still use it when i need to ivecsprayed just about everything through it with good result
@@duartepaintinghandymanservices you might be right about that. It was right out of the package, but maybe 4/10 finishing was a little soft for such a heavy duty product.
Wow.... It seems you have a bit of dyslexia going there. Yeah, the others caught it, but here's the skinny for the newbies that want the actual info ... The first number (4 in this case) is used for the fan size. If you multiply it by 2 the result is the approximate fan size when the tip is about 12" from the surface being sprayed. So a 410 tip has an approximate 8" fan when the tip is 12" from the surface to be painted. The last two digits are the orifice size in thousands. So this tip has a .010 (ten-thousandths) opening for the paint to go through. Orifice size is directly relational to how many gallons per minute of material will be passed through the tip. If you have a big orifice and a little pump... Well, you see the problem, gentlemen. ;-) .
The Earth is Flat, and it isn’t spinning. Do you really believe you’re spinning at over 1000mph? Research Flat Earth. Check out the Morgile on CZcams Piece out, stay Flat. Water does not conform to the outside of balls, and is always Flat and perfectly level!!
true american Go back to dribbling and drooling over your NASA/NAZIS Computer Generated Images from the comfort of your supersonic spinning water ball.
I'm a residential guy also, do a lot of spraying with the FFLP and FFT over the years and I've always thought I could do a car this way. As the finish is so good from those tips.
Did the same thing years ago. We used an airless sprayer with a new 515 tip and used industrial enamel and paint thinner to paint a VW bug. Industrial enamel is machinery paint and cheap but also very hard and oil resistant. Turned out great.
I always wanted to see if this can be done !! U did a great job considering its your 1st auto paint project.
Thanks so much for all the feedback! Just to remind the technical detailed people, I am not an automotive painter. I had great results from this project on this fleet van. I am a commercial and residential painter and may not have done this job to the standard of those of you in the vehicle painting industry. Its fun, corny, and worked well!
How's it look in 2020? Have any rust spots bubbled up? Did you do much (or any) sanding between coats?
Following
Curious how long it lasted myself following
I used to drive one of those vans for hauling cargo boxes. It was awesome and fast. Thanks for making it good again. Very nice job.
Awesome video motivated me to buy an airless sprayer and try it on my mustang 🤙🏽thank you 👍🏽
Lmao ..... ive been wondering if can use that pump, dude u just saved $700 paint job I'm gonna do this to my girls car before mine though🤪🤜🤛🤙🤙🤙🤙🤙🤙🤙Good job bro! Aloha
That looks great man. I've done this to several fleet trucks and its the best way to go.
Any orange peel doing method of painting? And with single stage paint?
Looks AMAZING!!!
Great Video! Those GMC Astro/Safari Mini-Vans are the best!
Fixing to Paint my 2010 Pontic Vibe in the same manner.
i use to paint cars for a living,specificly jaguars,,, we used a metal to paint primer called etch,,it stopped the flash rust ,, i dont think you had to wait 6 hours in between coats if the temp is over 75 degrees,,,, when i saw what your were doing i thought it was going to be one messed up job, to my surprize your painting job , rivaled any industrial job, way to go and thanks for sharing
Awesome video man! You have an awesome sense of humor. I enjoyed the entire video. Thanks for the info as well, getting ready to use my airless to paint my tool truck now 👍
Haha thanks! Fun video just saw it again. I still see the van around town still looks good.
Bravo my friend! I’m watching some videos to get hyped up to paint my horse trailer and this is the video that has inspired me to get it done.
Canadians have the best humor, thanks for the vid mate
First I love the sound effects 😂 second simply put.. great job 👏
I've been spraying cabinets,and all sorts of stuff for 25 years,I'm sure I good pull off a pretty slick paint job on a car with a airless and a 209 or 310 tip.
Not a 209.. 310, 410 are good.
So much fun doing this video in a sarcastic kind of corny way. I am stoked to see it circulate a bit! anything is possible as far as do it your selfers.
Hilarious! Seriously 44 have a stick up their ass.
Bud, best van paint video on the tube, I couldn’t find any info on using an airless sprayer with certain paint, and you are an actual painter so you eased my mind a lot mentioning the 410 tip. I have a small airless that I will be spraying an Astro in rustoleum tractor paint, Ford grey color. Knocked it out of the park my dude, thank you.
Dude awesome, im gonna use my titan airless sprayer to paint my silverado 🤣
Let's see a up to date video. This was definitely a interesting video lol good job
This dude is one badass lmao great use of it man some one got a new van
Good video! Great sense of humor!
top job man , always wondered if a airless would do the job
you have done the thing I have always joked about doing! awesome man
this is actually very inspiring if i may ask how has the paint held up to weather and use?
Not sure why this showed up on my feeds, but it was certainly fun to watch 😀👍
Omg that sound effect when you dropped the hood 😂😂😂😂😂😂
It sounds like the engine fell apart🤣🤣
Great job. Did u used oil base paint, like regular paint for cars???
that’s the first time i’ve ever seen someone sandva vehicle with a Belt Sander ?
Awesome paint video. You're hilarious. Let's get a beer buddy hahahaha
Hey not bad iam going to try painting my cousin's little Nissan thanks for the idea.
Beautiful job my friend im gonna do it to my dodge caravan do it black
I always wondered if I could use my Wagner pro airless to spray a car. Looks like it came out very nice.
What do you think compared to air compressor spray finish?
Air would be best but was overall happy.
You are awesome! Good job!
This might be 8 years old but it just helped me make my decision lol. I have a nova 390pc. I'll be painting my gmc 2500 van soon. I'm a Sherwin Williams guy too. What do you think the best to use these days?
I like the sound effects good hair waving classic good shit brother i live the PAINT LIFE
It’s not hard to tell this guy is Canadian
really nice man! congrats!
Thanks bro it was a great challenge!
They are good work vans. Just have to go slow with anything heavy.
Great video
This video is sick!!!!
Nice job!!!!
Listen people ! He tells you all about the equipment and material
No kidding ahah
Wish I could like this a 1000x
Good job 👍
That mask you had on was a heavy duty dust mask. Not for paint fumes, you needs one with charcoal filters
He has charcoal filters it's a 3m mask with charcoal filters
Travis Benfield that’s wrong respirator for paint fumes, correct one has cotton like pre filters, then charcoal canister. That mask is appropriate for say concrete dust stuff that is a dust and fumes that are not harmful. That mask will keep the paint out of your noise hairs but not the toxic fumes.
You need to take a closer look, those are fume filters NOT just dust filters, don't let the pink covers fool you. I just bought the same ones and they are multi- gas filters w/ pink covers.
@@nortavon yes you are very correct! Great cartridges. Nice
Great video, might have to try it!
Great job ready to work
looks awesome...glossy white...Any industrial alkyd paint will work for a car or truck ? why did you not shoot a coat of primer first ?
Great video! I'm really starting to think that painting my Jeep with an airless sprayer wont be a bad idea.
Lite coats, fine tip, high pressure, and lots of dry time between coats. At least a night. Better more coats than less heavy ones for sure. Thanks for the comment! More fun vids to come.
Skippy A how did your paint job turn out
I think what really set this video off is this guy's mullet. Hahaaha... I am thinking about using my sprayer to do this.
How high was your gauge set? Sorry if you said it in the video, I missed it if you did. Thanks
I need a paint job like that
Good job Mem.
Great job!!!!! Can I get the name of the materials you used for your van???? I want to paint my work van too
Products for the most part are losted in the video, what are you looking for specifically? Most of the work is in prep, and for overkill rust treatment in any areas that need it. Any industrial steel metal paint you can spray will work. Do not go for coverage! Do as many coats as you need. Too much material will sag on smooth vertical surfaces.
Nice job!
Love it bro
Can you tell what's the name of everything you used to mix it with anda where you buy it at
Super
Eye drops, hahaha.... Highest I have ever been.
good job
Nice! Easy!
Thanks 🇨🇦
Now go out there and do better work and charge more, then you can buy a new truck!!!
Wauld 310 tip be OK or a 410
I wonder if he lives in a van down by the river......
Yes I do!
Looks like a Ferrari now buddy
HAHA SaFerrari sports van!
Didnu put clear?
Hi jds what kind of paint were u spraying and where did u get it from?
sherwin williams
product rundown in video
That was different
Certainly different to the usual 2 stage 2K paint system.
The Gunman. Hey whats up what do u think about painting a car this way ?
what is the advantage in using plasti dip?
You got a bush truck? Dip is good< not something I have done personally.
I've been thinking about doing the same. so you didn't add any liquid hardner or clear coat ? how does it look now. thanks
itzPlayTime its holding up really well and is a fleet van now. I just used sherkem right out of the can and thinned it a bit. No other additives. I would do lighter coats and more of them. I had a couple sags I'm the heavier areas nothing super noticeable.
My dude look like Shane fury
Car paint job performed by a home paint specialist! 😂
Lmao that thing came out nice
Well done! What size tip did you use on your sprayer?
He said 4-10 = 8 inches fan.
Hell yeah
what kind of paint use for this project
5:50 mark: he used Sher-Kem from Sherwin Williams
It's been a few years, how did it hold up?
I took a trailer out of the back yard and rubbed a fence post pretty hard and was blown away that it only left a scuff haha! Still using the van in our fleet.
How can l get you
I'm living in Ghana
What *number* spray tip was used? Did miss that info?
4/10 tip
i admit the final utcome suprisingly looked pretty decent onVideo , i sprayed a VintagecSports Car with a Turbine HVLP spray unit and Dupont two Stage Automotive Paint with IMO got a Professional looking result with my Rig happens to be a older CambellHausefeild unit they don’t sell any longer the Gun is a AllMetal Gun and canister ( Aluminum) that cleans up very Well and Resembles a Auto Body Binks Gun with a siphon Canister below the Gun FYI one of my Uncles actually Developed and Patented the Reversible Self Cleaning Airless Spray Tip and started the Titan Paint Sprayer Company he made his money and sold out years ago Currently i beleive it’s all owned by Wagner now and has been for a few years Painting isn’t my trade i’m a retired ProfessionalWoodworker and i bought the Turbine HVLP for finishing Furniture and Cabinetry it was also a good portable unit to do refinishing on Jobsites if needed we did a lot of Lobby Paneling , and ArchitectualMillwork that sometimes needed touch ups with Conversion Varnish with minimum Overspray and Set up / Breakdown time so that CampbellHause Feild Turbine was the one i liked at the time and still use it when i need to ivecsprayed just about everything through it with good result
F@k yeah!..like new
😀👍
Weres the clear
perfect for stealing motorcycles
I think i can run 2 part polyurethane through my titan 440
The audio quality of the video sux! Other then that, nice job!
LOL STRAIGHT TRIP
pressure needs to go up, your gun is leaving tails
Yes that was frustrating.. That is at full pressure on the 395. Now I would have used a 495 minimum.
jds could have been the tip was blown
@@duartepaintinghandymanservices you might be right about that. It was right out of the package, but maybe 4/10 finishing was a little soft for such a heavy duty product.
first number on an airless tip is the orifice. Second number is the fan width x2. so a 410 would have a 20 inch wide fan.
stoneygreek wrong! First number is the fan and the 2 last numbers is the orifice
stoneygreek wrong
Wow.... It seems you have a bit of dyslexia going there. Yeah, the others caught it, but here's the skinny for the newbies that want the actual info ...
The first number (4 in this case) is used for the fan size. If you multiply it by 2 the result is the approximate fan size when the tip is about 12" from the surface being sprayed. So a 410 tip has an approximate 8" fan when the tip is 12" from the surface to be painted.
The last two digits are the orifice size in thousands. So this tip has a .010 (ten-thousandths) opening for the paint to go through. Orifice size is directly relational to how many gallons per minute of material will be passed through the tip. If you have a big orifice and a little pump... Well, you see the problem, gentlemen. ;-)
.
my bad, a 410 tip would have an 8inch fan and a 10 orifice
I got a 97 Astro van 4.3l red don't like that color
The Earth is Flat, and it isn’t spinning. Do you really believe you’re spinning at over 1000mph?
Research Flat Earth. Check out the Morgile on CZcams
Piece out, stay Flat. Water does not conform to the outside of balls, and is always Flat and perfectly level!!
Flat Earth Fisherman you are a straight-up idiot.
Let's Make Fools Of Ourselves
WTF are you taking about. Globe Heads are just ridiculous.
Flat Earth Fisherman idiot
Flat Earth Fisherman just because you have a flat trans lover doesn't mean the 🌎 is flat
true american
Go back to dribbling and drooling over your NASA/NAZIS Computer Generated Images from the comfort of your supersonic spinning water ball.
I just saw a airless sprayer at Home Depot for under $400.☝️
D.A.R.E. to say no to drugs....lol Please don't drink zylene
Sound is awful
Good job Mem.
Thanks mem it was good times. Making this video was even funner ahah