How to Replace Cab Corner 2001-2006 Chevrolet Silverado 2500
Vložit
- čas přidán 30. 11. 2022
- Buy Now!
New Cab Corner from 1AAuto.com 1aau.to/ia/1ABPR00091
This video shows you how to install a cab corner on your 2001-2006 Chevrolet Silverado 2500.
This process should be similar on the following vehicles:
2001 Chevrolet Silverado 2500 HD
2002 Chevrolet Silverado 2500 HD
2003 Chevrolet Silverado 2500 HD
2004 Chevrolet Silverado 2500 HD
2005 Chevrolet Silverado 2500 HD
2006 Chevrolet Silverado 2500 HD
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaZC/1AXAA00013
• Cutoff Wheel 1aau.to/oaa/1AXAA00254
• Trim Tool Set 1aau.to/oTY/1AXXX00006
• Welder
• Welding Helmet
• Locking Pliers 1aau.to/oir/1AXAA00139
• 1/8 Inch Drill Bit 1aau.to/oar/1AXAA00092
• Cloth Rags 1aau.to/owI/1AXSS00035
• Glass Cleaner
• Gloves 1aau.to/oxL/1AXSS00048
• Marker / Writing Utensil
• Painter's Tape
• Paper Towels 1aau.to/owI/1AXSS00035
• Safety Glasses 1aau.to/or5/1AXAA00343
• Sandpaper
• Spray Primer
• Surface Prep Discs 1aau.to/oj/1AXSS00076
• Grinder
• Hammer 1aau.to/oKJ/1AXAA00091
• Pick 1aau.to/oDB/1AXAA00037
• Sanding Block
• Wire Brush 1aau.to/opJ/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thank you for your video. Been debating on if I should do the rockers and cab corners on my 02 Silverado or just put covers on. I was an ASE Master tech for 30 yrs but never got into body work. After watching your video I'm probably gonna do them the right way and if it doesn't come out good then I'll put the covers on, lol. Thanks again for the great video.
To small holes for plug welding,must make them bigger............if you want them to hold.......
Excellent video ~ Very detailed, and precise! Thanks!!
Beautiful work, my brother.
Great video. Thank you for all the detail.
Good solid job no covering up and pride in workmanship. Not a fan of foam between panels.
I did it faster with drilling the spot welds and hitting it with a step bit
Thank you ❤
Love the view but why didn’t you do a weld through primer on the patch and body?
I don't understand how the metal fits up there and you can drill through both. Is it overlapping on the sides but not on the top?
hi just wondering i have holes on the inner panel is it still possible to patch?
Nice job. Thx
Great job brother
The website only has passenger side replacements?
I did my rocker panels on my 05 Silverado, they came out pretty good one I cut too short, and the door rubs when I close it.
I have a lot of experience with an arc welder, not as much with the mig welder
I wish I could talk to you on the telephone and thank you for this video and let you know you are an awesome teacher. you have a nice touch with the tools!
Thank you for the information from one American to another
Check door body line too....
+@darrellhowcroft6941 Thanks for the feedback! 1aau.to/m/Shop-TRQ
Put on more tape and mark the top of the replacement no guessing
Didn't scuff the new piece just toss on primer😂
Same as S10s
i only need a 1/4 of that panel..
U forgot weld thru primer