Vložit
- čas přidán 25. 06. 2024
- PCBWay 3D Printing and Fabrication: www.pcbway.com/rapid-prototyp...
Aixun Website: aixuntech.com
Aixun T320: s.click.aliexpress.com/e/_Dkg...
Pico Technology 5000 Series Scope:
www.picotech.com/oscilloscope...
Support the Channel with Patreon: / sdgelectronics
----------------------------------------------------------------------------------------------------------------------
SolderKing UK Made Solder: solderking.com/
SolderKing UK Made solder available at Kaisertech:
UK JBC Distributor kaisertech.co.uk/ Discount Code: "SDG5"
----------------------------------------------------------------------------------------------------------------------
0:00 Introduction
0:42 PCBs from PCBWay
1:20 Headline Specifications
3:04 Detail of the Station
5:36 Included Accessories
6:40 Inside the Unit
13:55 User Interface
18:29 Calibration
19:32 Some soldering with PCBWay PCBs
23:54 Coin Test
26:00 Testing the remote control sensor
27:13 Testing on earthed PCBs
28:44 Conclusions
----------------------------------------------------------------------------------------------------------------------
3D Printers:
Ender 3 S1 Pro on AliExpress: bit.ly/3Tfiz22
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Artillery Genius at Banggood: bit.ly/32iG2dv
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Geeetech A20M at Banggood: bit.ly/2YooVll
Geeetech A20M at AliExpress: bit.ly/3oBqo2I
Geeetech PLA+ Filament: amzn.to/3gelSX1
Ender 3 V2 at Banggood: bit.ly/36lN8Ny
Ender 3 V2 at AliExpress: bit.ly/3j1C2CO
-------------------------------------------------------------------------------------------------
Soldering Tools and Equipment:
Aixun T420D On AliExpress: bit.ly/3cQXXhh
Aixun T3B on Aliexpress: bit.ly/3CHerj1
Aixun T3B on Aliexpress: bit.ly/3cDkWIY
Aixun T3A on Aliexpress: bit.ly/30LDcgG
AiXun T3A on Aliexpress: bit.ly/2VdRVhU
Yihua 853A Preheater: www.banggood.com/custlink/DGD...
Youyue 946C Hotplate at Banggood: bit.ly/2MuLwqM
Youyue 946C on AliExpress: bit.ly/374v3Tp
Solder Paste: bit.ly/2E1P5jR
Solder Flux: bit.ly/2MQn7we
Quick 857DW+ Hot Air Station: bit.ly/2OWDvf4
T12 Soldering Station: www.banggood.com/custlink/3KK...
AC Version: www.banggood.com/custlink/3GK...
T12 Iron Tips: www.banggood.com/custlink/3DG...
Daniu Tip Cleaner: bit.ly/31VHwWM
KSGER T12-BCM3 Tip: bit.ly/2xgYXCQ
-------------------------------------------------------------------------------------------------
Microscope Equipment:
Eakins Barlow Lenses: bit.ly/3aBY5tR
Eakins Black Microscope: bit.ly/2VEcYaW
Eakins Camera Microscope: bit.ly/2x86hnT
Camera Adaptor for Microscopes: bit.ly/2KBZQMQ
Amscope Microscope Head (US): amzn.to/2YmZWNx
Amscope Trinocular Microscope (US): amzn.to/2YdBE8k
Amscope Trinocular Microscope (UK): amzn.to/2V8w9Gh
Swift SS41-WF20 Binocular Microscope US: amzn.to/2VLWEpb
Swift SS41-WF20 Binocular Microscope UK: amzn.to/2GYGYFV
Visit my website: www.sdgelectronics.co.uk/
-------------------------------------------------------------------------------------------------
#ElectronicsCreators - Věda a technologie
PCBWay 3D Printing and Fabrication: www.pcbway.com/rapid-prototyping/
Aixun Website: aixuntech.com
Aixun T320: s.click.aliexpress.com/e/_DkgnT15
Pico Technology 5000 Series Scope:
www.picotech.com/oscilloscope/5000/flexible-resolution-oscilloscope
Support the Channel with Patreon: www.patreon.com/sdgelectronics
Does it have problems with temperature spikes when you touch ground with the tip? Aixun was hiding problems with previous models by showing no real temperature... Also voltage about 1 V with ripple was leaking through the tip, in other video it was almost 1.7A.
Can you please check it if your device has similar issues like in tony359 on 11th minute he shows voltage leaks, temperature spikes at the tip of the iron.
Does it leak to grounded surfaces like the other auxin ? 😊
honestly the feature for changing temperature with the iron is pretty genius! Never seen anything like it but it makes a lot of sense. On my workbench I have the iron and control unit on the right side which means I either need to reach across with my left hand for change settings, put the iron down and use my right hand or try to change it with my right hand while also holding the iron which is what I often do but isn't really the safest
Great video, Steve. AiXun is an interesting company. This station is one I would have lloked at had I been needing a Soldering Station. Thanks for sharing with us.
Thank you for the review ! I was waiting for you to check this one out. I've been checking you channel for about 2 weeks. I saw the C210 one for sale with 3 tips for about $100 shipped on A-E. I really like the other AIXUN stations that I have and was really curious about these versions.
Thank you for all your videos, you give very detailed presentations, which is very good, I ordered an Aixun H310D which is now at customs and I am waiting for them to contact me to pay the taxes, after seeing your description I decided to I'm ordering it, I'm going to do the same with the Aixun T320 station which is already on the wish list, now that I've seen it unfolded and with your comment you've convinced me.
Thanks again for your presentations.
How does this soldering station works?
Hello,for now, the soldering station is on the way, it hasn't arrived yet, so I can't tell you how it works, the hot air station from Aixun H310D works perfectly, I'll write to you after I receive it and try it.@@OG-ChokeMaster
@@andreipop2431 thanks appreciate it.
just ordered one today - thanks for the video it was really helpful!
Thanks for the review gave me the confidence to buy one. My first soldiering station.I like its all in one: sponge, steel wool, and cradle. Heats up quick and automatically shuts off or runs in low power mode. My old cheap iron I would ruin the tips because it run 100% and I'd forget it on.
I was hoping you would test this station. An interesting soldering station that I will probably get myself. Thank you for the great review. What I like about your videos, is that you also look inside to see if they are safe.
A very professional review I would say, and I think I need one of these
Fantastic review, yes I did enjoy watching this, thank you. Going to look on Ali, really tempted now, great machine.
If you want to replace the no-name capacitors.
X2 400V 120UF 30x18mm Pitch: 8mm
X4 35V 1000UF 20x10mm Pitch: 5mm
X1 50V 22UF 11x5mm Pitch: 2mm
Nice video 👍
We also recorded a video about this soldering station. Interestingly, we received some of the first pieces produced from the manufacturer. - with software v1.0.
The graph showing temperature and power was only available after updating to version 1.03
That growing sponge (bob) after wetting is always satisfying to watch 🧽
Nice tool, pleasure for work.
uff. this looks great. wish i didnt buy the t3a to get this on instead, the setup looks so much cleaner
I have Aixun t3as for few months and I am happy with it. I would like bigger sponge though.
This video couldn't have come at a better time. I was on the fence with a T3A / Mechanic C211 and Sugon T21. Just bit the bullet with the T320. £101 delivered to the UK within 7 days with 3 tips is an absolute steal.
The one confusing thing is that I thought T210 and T245 are wired differently?
I know the T3A uses GX style connector with T245 whereas the T245 on the T320 is 6 pin and is the same style as the T210 on the T3B
On the T420D the irons both use the same connector. Some of that circuitry around the driver transistors may be to adjust the drive for the two different irons
Great review. As a starting in looking to upgrade from the very basic cheap soldering iron, what would you recommend for SMD soldering? I saw the review on the Sequre and looking at the SQ-D60B but also the Aixun T320. Would you recommend anything else over these?
the UI layout and flow is totally fine but would it kill them to change the font on the display? It seems like the easiest part to get right.
No serifs, just a clean simple font would look much nicer on a small instrument display, to my eye at least.
This.... The screen of the T3A looks much much much better.
It perplexes me why Asian manufacturers often use ugly serif fonts for western languages, both in print and on-screen. The serif on-screen fonts on Chinese gadgets and software are especially annoying.
maybe they just don't perceive them as ugly like we do due to their use of different writing systems @@tookitogo
@@AndreaAustoni Yeah, I’ve wondered that myself.
Nice unit ! what is that machine you touch to check calibration of the tips?
Justo for better understanding, both T245 handle for T3A and T210 handle for T3B are compatible?
Do they need any mod?
I have the Yihua 982 C210/245 station , some good soldering units coming out of china , mine does the job only thing that bugged me was the handle conection at the back i coverted mine to front socket gained about 6'' of lead also got a 90deg power socket lead the unit now stands about 2'' from the back of the bench ..................
hi thank you for the review, can you help me out please, when you opened it , it looked like the was enough room one you had removed the psi for me to fit 8 x Sony VTC6A 21700 4000mAh 30A 3.6V Batterys in there to make it battery powered . do you thing they would fit?
Your VERY good with a solder iron, great work, very steady hands.
Maybe add a discussion on AiXun and their firmware support. Having a T3B, they seem to have trouble in that department. Having some publicity might help to keep updates coming.
Quick question, what solder were you using, lovely clean shiny joints.
It's a 0.5mm 63/37 Multicore solder. Any 63/37 should give the same results
Thanks for the review. What solder are you using? Lead or Lead-Free?
as i remember always Lead
Did they correct the un wanted voltage at the tip that the older units had?
and the temperature jumps and lying temperature display
Doubtful. It’s the thermocouple circuit design that’s the issue.
@@I_SuperHiro_I maybe a couple amps of heater current flows out of the tip too!
When touching the tip to an earthed pad, a parallel return path for the heater current is created through the mains wiring, like a ground loop (because the SMPS output -ve is earthed and JBC C245 thermocouple bridges the tip & heater).
on some scenarios it's impossible to make the PCB "fully disconnected" from earth. I've been trying to use my T3A to de-solder SMD capacitors, using a second traditional iron. It's impossible, the temperature reading gets unreliable and the tip reaches 500C with 360C as set point. I am so unhappy with my T3A, I would not buy it again. I feel that this earthing issue is a major one.
This seems to behave a little better but still I don't want to see 410C when I set 310C on the unit. I would also check the actual tip temperature when that happens: with the T3A they tried to hide the overshoot with FW 1.34 so who's telling us that this is not doing the same and they are also covering the power spike on the display? :)
Thanks for testing the earthing issue I discovered on my T3A video review.
Isn’t it trivial to add a switch (or just an anti-ESD 1-10MΩ resistor) between the mains earth and the 0V rail?
Maybe buy the linear psu one
@@Scrogan I am not 100% sure the supply earthing is the issue here. Even if it was, does that mean the tip is going to be unearthed? It also means opening it up, probably break the front panel in doing so and losing whatever warranty it comes with :) Anything is possible of course.
@ndarjotech Maybe buy a JBC? :)
@@tony359 i will wait for the review in eevblog 😂
Do you ever use the pointed tips? I have a couple and can never get them to solder anything!
No one likes conical tips in the west. Maybe the Chinese use them, although I can’t understand how they can like them.
Wow. It seems to be a much better improvement to the T3A. There's something I'd like to know that I haven't found a solid answer yet and I hope you don't mind me asking for your help. Is it possible to use ANY original JBC 245 and 210 cartridge from their entire cartridge range with these T245 and T210 AiXun handles? Would original handles work with this station? Thanks in advance for your help, Steve.
Yes the cartridges all work. If you buy a JBC handle, you'll need to swap the connector though.
Quite happy with my T3A so idk if its worth upgrading. Perfomance looks to be the same?
Performance is about the same, though some people found with genuine cartridges the T3A could brown-out occasionally.
How would you compare it to the T3B if I had to decide between those two?
Daaammmmmm this boieee can solder !!! lol Excellent review sir !
Very nice indeed. A little pricey, but worth it for a reliable soldering experience.
Keep up the great videos,
Joe
Huh what's that wireless looking logo on the top tho, reminds me of wireelss chargers lol
Despite such powerful microprocessor no way to store temp compensation for each cartridge?
I used to work in the electronics industry for a long time, and our soldering stations were JBC. You mentioned this unit being very light, does that make it move across the table when you put the iron back in the holder?
The feet have good friction, so no issues like that
When you try to change tips the whole station is moving. You need to hold it with one hand and then remove tips. Quality of this plastic housings is poor. My unit has uneven base so it wobbles even when you press buttons. Feels more like cheap plastic toy than a soldering station.
@@sdgelectronicsfoot friction does nothing to help when you pull a hot tip out using the included stand. The whole station gets lifted up if it’s light, no?
thanks for the review, wonder how it will perform over longer period, do you reckon caps need replacing same as with Aixun T3 model?
damn all these chinese brand are elevating the competition, JBC will have to make some innovations to stay in the top and justify the price
What if you insert a 1Mohm resistor in the ESD line ? Does the temperature spike still occurs ?
It's an issue with the AC to DC converter. The output is tied to mains earth for EMC reasons
I have a similar JBC clone and it is excellent! Like the AiXum, mine too has a nice color TFT display, but it is much more compact and has a separate high quality iron holder. I've used it almost every day for 2+ years and I love it! It works so much better than my old ersa RDS 80, which is also quite good but uses the old technology. The JBC design is so good it makes any soldering job a pleasure, and these cheap clones do seem to duplicate the essential performance features of the genuine JBC.
does this work with OEM JBC tips? might be worth it to get this vastly cheaper unit and just spring for the OEM tips
Yes, I used JBC tips for the soldering
@@sdgelectronics thanks for the reply good to know
Looks a nice bit of kit , what’s the purpose of WiFi on these ?? Just incase a software update for a bug in the system ??
I could only find reference to firmware update. Didn't seem to do anything else
I ordered the T3A about a year ago, but would have happily waited for this as an upgrade. Do you think its worth the upgrade from the T3A to this?
Looks about £10 in total if you include the stand.
I currently have the T3A and also thought the same initially, but I would say that for me, having the movable stand is more comfortable, so I will keep it)
WiFi, Bluetooth and USB-C for firmware update?
Wonder which one would be a better buy. The T3A (or the newer T3AS) or the T320
I think this one is probably better overall.
@@sdgelectronics From what I've heard the T3A had some issues with overshoot, but also power supply buzzing issues. Maybe those are fixed on the T3AS, or is it the same as the T3A? The T3A just takes up less space with the separate stand.
@@PiratCarribean Pretty sure The T3A and T3AS have the same issues with buzzing.
@@PiratCarribean those are software issues
Can we compare with orignal JBC ?
Please review i2C PDK1200
👍👍👌👌
Any buzzing sound coming from the handle when it is heating up?
I got this station and unfortunately it is buzzing, both the handle and the station itself. I have no idea if it is normal, the station otherwise works like expected.
Nothing coming from mine at all.
@@sdgelectronicshow do you know you don’t get sent a hand picked, special review unit?
Out of curiosity can t320 use the t12 handle from t3a?
no. The connector is different on the T320 handle and the T3A handle.
Seems nice. Do you have any idea why it's much cheaper at aliexpress than on ebay?
tax import fee ebay fee shipping fee , and others ;)
I don't suppose if anyone has tested this station for voltage leaking? the aixun T3A has voltage leak amongst other issues
Shame you didn’t double check the temperature calibration/compensation function, and the units behaviour with cheap tips. But regardless, a fantastic review, thanks!
It works as you'd expect, when I change the value to -7, the readings are spot on. It's different per cartridge though as they all behave slightly differently, so if you swap out regularly there's little point in changing the value.
@@sdgelectronics Great to know! Your reviews on kit are always the reference standard.
Does handpiece get the power through the flex?
How else would it be powered?
I have the T3A and quickly burned out all of the Chinese tips both from Aixun and a "high quality"3rd party. Now using genuine JBC tips but locally they are rather expensive and a very limited number of suppliers and rediculous freight charges. Has anyone found a supply of decent Chinese tips that don't burn out after a few hours?
Wondering if anyone can tell me which other stations he recommends as I’m looking to replace my xtronic that I got back in 2020
i think this one is perfect looking at performance
Would be cool if they open sourced the firmware
Will you be doing a review of the gvm h3 possibly? I ordered one but it never came and was returned to China and I'd really love to hear your feedback on it before Reordering another one especially compared to this unit the 320. That unit is very very similar and uses an actual transformer instead of the PCB which is why I was so interested in it compared to the 320. It would definitely be worth a good review. There's a lot of people asking about it and it appears to be at least from the specifications and info a really nice unit (personally, I prefer a real transformer, although I know it's not the end of the world if it uses a PCB). I own all of the aixun units and they're all great but I'm much prefer units with a transformer and build wise similar to an actual JBC. Just curious. Great review!
Gvm is on order
@@sdgelectronics I'm not sure why but I can't see my second comment, but I wanted to let you know that the USB port on the back is basically useless. The company will not give out the software nor the updates for the unit. I've tried getting them. A friend of mine that ordered one tried to get them and there is a CZcams review where they're saying they can't get them either. If this duplicates my other message, I apologize. It seems to have disappeared though. I spent a couple of weeks trying to get software from GVM/ sunshine and basically was told every time they don't give it out
I've you could compare it with Aifen A9 it would be appreciated. Similiar class of JBC clone
I'll see if I can get it
Wonder if it is compatible with C115 handle ?
with this firmware i think not Support T210 and T245 handles
Can you use JBC handles on this?
You'd need to change the connector
The connector is the same as the regular JBC connector, seems like it should work?
@@sdgelectronics is there some resistor inside to recognise the handle or oem one just does not fut physically?
I wonder what happens with the graph display if you have it running for hours? You can see later in the video it has trouble rendering 3-digit X-axis labels (some overlap), so what happens when it gets to 4 or 5 digits? 😄
Personally I think it's pointless showing an actual seconds value, should probably just have tick marks and avoid complicated rendering issues.
Agreed, yes as expected it just fills up with numbers. Markers would be sufficient
Do you still recommend this soldering station?
Yes it seems to work well. The T420D is better if you can though
sugon t60 😊
Kupiłem niby fajna. Ale zainstalowałem aplikacje na PC podłączyłem stację przewodem USB C i pokazała się aktualizacja ;). I tak już zostało, stacja przez 5h nie reagowała na aktualizację ciagle 0%. Po wyłączeniu stacji i włączeniu stacja na wyświetlaczu pokazuje updateding... i nic się nie dzieje. Musze odesłać do Chin. A byłem taki szczęśliwy gdy ja dostałem i włączyłem. Niestety uważam że to jednak za duży bajer a Chinczyk nie dba o soft dobrze. I teraz mam trupa nie stację :D
And here I am, happily soldering away with an old Weller Magnastat with absolutely no electronics, the only "display" being the light on the power switch. Never realized I need a real time graphic display showing the power and temperature curve of the iron to get good solder joints. 🤣
Today’s video is also sponsored by AiXun. Free gear is still payment.
I was really disappointed how he glossed over the issue at the end with the temperature spiking.
He says it looks like they made it better using firmware but it bloody doesn’t! I saw 412*C flash up when the set point was 310*C.
That’s relying on the readout being truthful which on some stations it isn’t. It would have been good to double check the actual tip temperature.
@@davadoffWhile I don’t disagree with your objections to the video: Just as an FYI, the display flashing 412C doesn’t necessarily mean it actually reached that temperature. Stray voltages can easily produce massive measurement errors in thermocouples. Even more so when using a switch-mode power supply like this one.
Depending on the circuit design, it may well be possible to fix that in firmware, by making sure you only measure with the heater off. And if not, filtering multiple measurements may be able to produce realistic numbers.
The Pace station I have at work shows similar high temperature blips while heating up from cold, and that’s a top brand.
On the other hand, if a tip thermometer actually showed 100C of overshoot, that’d be a serious problem!
@@tookitogo good point. It wasn’t clear to me the tip wasn’t overshooting for real. In fact I got the impression from this vid or previous one that it was actually overshooting for real.
The area where tip travels should be metal
Why don't they just isolate the tip and then allow the user to decide how they want it done.
On the Weller stations I bought for work there is a jack socket on the rear panel, the tip and earth connections are on this, so it allows you to decide if you want to short the tip to earth or as i always did was fit a 10K resistor to provide a bit of protection and stop the tip charging up with static etc. Also means if you want to work on live PCB's you can remove the jack plug and have a completely isolated tip.
My home made Weller soldering pencil power supply has the tip earthed via an internal 10K.
Not sure why they need all that information on the screen, I just want a soldering iron that does the job. I'm never looking at the display while the iron is in my hand.
The number of un-review soldering irons must be dropping fast.
I still have about 6 stations sitting here still to be reviewed, but some are a bit less relevant these days. You forget we're living in an era of USB soldering irons with 64-bit processors in them!
I think on most pro systems, the tip is tied directly to mains earth. It seems to be on the Metcal, JBC, Pace and Ersa irons from what I remember. But they either have floating power supplies or don't use a thermocouple in the same configuration as JBC cartridges, so no issue on those.
@@sdgelectronics must be a Weller thing. but I still like the tip to act like an extension to the ESD mat.
@@sdgelectronics Once you have a tip that get hot, and the right temperature. i suppose you have to add bells and whistles to try and stand out.
10k resistor will work for ESD but will not work for induced voltages, shorted heater coil, etc.
How do you have steadyhands like that, mine shake like a grandma!
Do you drink coffee? Mine are shaking because of the coffee.
@@alexandros1173 I drink two cups a day and I love coffee! But I feel like it helps me be calmer
Why dont you use the tips that come with the station??????????????
I thought he did.
But there are no Chinese JBC style tips worth buying, AFAIK.
@@davadoff No look at the video its a genuine JBC no chinese tip
I love the coin test. But why you didnt do test in that thermocouple you designed used in c211 video. Hmmm. Inconsistent.
Btw. Did this station overshooting? i mean have high delta T around set temperature
I couldn't do it on this occasion as the Picoscope is doing some datalogging.
If I power up the station with the tip placed on the temperature calibrator, it does not seem to overshoot.
@@sdgelectronics thank you so much. I thought you will never reply my comment. Lol
Very cool station. Makes it really hard to justify purchasing the original jbc
I mean realistically original is less easy to use. Takes longer to start, cant change temp when the handle is on the stand.
That's true, but only IF you planning to use these chinese knockoffs for a hobby. If you need a soldering station for a serious work, go with the original! I had t420d and did a comparison test with the original compact JBC - the difference is HUGE! Even if you use the original JBC tips!
We have two original JBCs, 4 different Chinese ones(Sugon and Aixun). No much of a difference if any.
Even the tips, if you use C245 ones go with the original. If you use C210, since the originals are expensive and easy to break just get Chinese ones too. They are 90% there, last about the same but cost 1/5 or 1/8.
@@johnyang799 I used the same original tip with T245 on the same 6 layers pad, both stations calibrated to the same temp with the same solder wire. T420D runs the tip more aggressive, peaking to 200W,(shortening the tip life of course), but the response was always worse than the original, which has limiting to 180W peak. The temperature compensating algorithm in the chinese station simply fails to do the job properly. And yes, I tried all t420 firmware's available. I'm glad that I got rid of this station and I'm not planning to buy a chinese soldering station at my life... As a hardware built quality, it was very good, I must admit though... The software is a no go!
I haven't really noticed any significant difference in use between the JBC DDE and T420D. But for professional use, it'd always be sensible to use the premium brands.
The shop is sold out…
11:30 Thermocouple? As I looked inside, I thought it was an electrical connection and a 2,4GHz foil antenna...
me normal themperature 230, 250, 280C 😊
Same spikes like the other model. people trust your reviews so please give honest advise.. Its not an improvment. its another casing with same shit inside..
Apologies if I missed something - I thought I had covered the shortcomings of this device. Which spikes have you seen?
Does soldering station have also voltage on it? This movie changed my mind to buy a AiXun.
czcams.com/video/hGK7s-9tXs4/video.htmlsi=vv7UmDfsGBFpzl2y
Yes it does