SKODA FABIA Expansion Tank (Mk1 99-2007)
Vložit
- čas přidán 11. 09. 2020
- In this video I show you how I removed an old coolant expansion tank and fitted a new one on a Skoda Fabia MK1 (99-07) PD 1.9TDI ATD engine, which is similar to other VW/Audi/Seat/Skoda models
Coolant Expansion Tank 6Q0121407
amzn.to/3rzyQ5w
Coolant Water Temperature Sensor 06A919501A
amzn.to/3kVhTRy
Coolant G12 pink 50/50 from concentrate
amzn.to/3iGyoyi
wear gloves/eyewear
amzn.to/3rzrleH
amzn.to/3kSG8Qm
Please Like this video:👍 • SKODA FABIA Expansion ...
Please subscribe to this channel:👍 goo.gl/eubNMd
Please share this video:👍 • SKODA FABIA Expansion ...
Buy Harvey a Coffee: ko-fi.com/hatboyharvey
I thank all you guys for watching 😎. Please let me know if this video helped you and what you think in the comments below and don't forget to like, share and subscribe for more escapades of HatBoyHarvey in the next video release,
(Oh and he’s the rabbit in the video if you’re wondering)
The content of this video is for information and entertainment value only and it's creator makes no claims, promise or guarantees of it's accuracy, coverage, instruction or adequacy of the procedures contained therein.
HatBoyHarvey assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
HatBoyHarvey recommends correct safety practices when working on motor vehicles, vehicle lifting tools, axle stands, hand tools, electrical equipment, chemical, products and consumable parts, lubricants or any other tools, equipment, chemical product and consumable parts, lubricants seen or implied in this video.
No information contained in this video shall create any expressed or implied warranty or guarantee of any kind of expected result including any injury, damage or loss that may result from improper use of the information contained in this video and the use of any tools, equipment, seen or described in this video and is the sole responsibility of the viewer and user and not the creator of this video and HatBoyHarvey.
Music: Race_car / Puerto_Rico_Me_Llama / youtube_audiolibrary / also Audionautix is licensed under a Creative Commons Attribution license (httpscreativecommons.orglicensesby4.0) - Auta a dopravní prostředky
Always very informative, when I cant find any videos in czech, I go here
:-)
Super. Your videos have kept my Fabia running great. Thanks so much👍
Thanks, You're very welcome :-)
Clear, concise and extremely well explained, as always. Many thanks HRH 😁👍
Thanks Frankie, you make me feel almost like royalty 👑
@@HatBoyHarvey HBH = HRH according to the Kindom of Skoda 😁. Keep healthy mate and thank you for all your time helping us Fabia family
Great video as usual
I would advise everyone to check the conector on the new expansion tank before replacing. The one I bought at gsf had the pins too long and I had to grind them a bit
Thanks and thanks for sharing the information :-)
Thanks!
Thanks to you I have allso started my channel here on CZcams !
Great to have inspired you, wish you good luck :-)
Good job ! Thanks for education, man
Thanks, just to hopefully help others :-)
L
You are a master
No problem 👍
If you want the bottle may be reused if the sensor of colant is defective. You need to dissansembly the bootle and insert in 100 ml of a chemical solution that remove the oxidation from the probe. In my case the chemical solution was a bathroom cleaner(CL base). It works well.
Thank you for sharing that with everyone, good to know :-)
Super video.👍👍👍
Thank you 👍
Красавчик!
Я себе тоже поменял бачок)
они выглядят намного лучше
thanks
sir
For teach evryone
You're very welcome :-)
As always accurate and informative 👌🏻
Great to hear, thanks :-)
Thanks man I love your videos and i have the problem with the coolant tank because my tanker Has glued holes and the sensor in it is glued too 😭
Thanks, Glad you like them. These are cheap to buy and make the engine bay look new :-)
@@HatBoyHarvey I am getting one
I have trouble when it's cold weather opening/to undo the coolent tank lid to top up coolent. Plastic thread becomes very stiff seized up on a cold morning I can't twist it lefty loosey by hand to undo. Any tips on how to open e.g. a warm cloth or aid of a tool?
Putting a something fairly hot on the lid would in theory expand it a little to open it (not a blow lamp!), perhaps one of those warmimg bag that have beans in them. They use them as bed or joint warmers. once the water system has the correct coolant and level you don't need to take the top off for years, so I'm thinking you may have a problem if you are filling it regularly?
Hi. Question. I have Skoda Fabia Mk1. Instead of G12 coolant I've got Comma Xstream G40 (already mixed) from Halfords. What do you think? Is it ok to top it up?
Can't find G12 anywhere.
Thanks
No, G40 is equivalent to G12++ which is not the same. G30 is the same as g12/g12+ and is compatible, G40 isn't compatible.
Thanks for quick reply. Current coolant color is pink. Comma Xstream G40 is also pink. I've changed it for G30 but color is red.
Now I'm even more confused.
With my research I found out also that G30 is compatible with G12. Hmmm...
Can you make video about changing of cabin radiator, 👍👍👍
Yes, this is on my to do list, But not sure when, thanks :-)
@@HatBoyHarvey ok, thank you
Hey, I have fabia with "comfort" trim as your is and i have problem with remote key locking and unlocking. It just doesnt work. I tried everything from checking fuses, changing batteries in key fobs, re-pairing keys with car diagnostics, and nothing works.. The car just doesnt respond to key. Any help or future video maybe? Thanks for all tips.
Does the light light up on the key? does the key work all the locks manually in the drivers door lock? When you open the door are the interior lights/door light on? Does the security flashing light on the door card work? check connections going into door by the A pillar/door lock/control unit under steering wheel next to heater clutch pedal. VAGCOM would be able to isolate problem diagnosic best so you know where to look further before you start replacing stuff. control units fail/door locks fail/wiring connections fail. Also check battery is good with good ground. Hope this helps :-)
@@HatBoyHarvey All keys were checked for signal, they showed up to be allright, unlocking and locking the car manualy works fine, microswitch in door lock is ok too, im worried that it should be comfort control unit, because VAG can not comunicate with it.
It could well be the central locking control module, worth checking the wiring to the unit first. Do you know if the car leaks in water? as I keep hearing reports of damp effecting these a lot and I also have had issues with this. I cured the damp in the footwells and the electrical gremlims disapeared.
@@HatBoyHarvey i had big leak from back doors, fixed it (i think you even made a video about it) and no more leaks are in the car. So i will check the connection to the control module and i hope its just some oxidation on conectors and not whole module gone. Anyways, thanks for your time and help.
Hello my friend i remove the pannel like you do in the photo but i dont see relay 377 for front window wipper can you just help me wicht numer is please .
No relay 377. wiper relay is on the circuit supply voltage board contained within the box under the other relays. It is soldered to the pcb board on most mk1 fabias and not a separate unit. It can be replaced if you melt the soldered joints to remove. First try to check all connections to the module and any visible wires damaged. Also on some models the relay was placed inline with wiper motor, behind the scuttle panel. The wiper stalk arm may also be faulty which I will soon do a video on.
@@HatBoyHarvey my wipers work but when i leave in on off control they restarted many times and my lights in deashbord go on and off i have afraid maybe my car can take fire because in Sweden we have a lot of rein
Thank you my friend for your time
You are A GOOD MAN
Hi im having a similar problem mk1 2003, light comes on before i start driving, while driving, sometimes not at all, but when it does come on my fuel guage drops to empty !!! also my light for the washer fluid comes on when its full only started doing this since the temperature light came on.....i have replaced the coolant sensor + new coolant.
Hmm, some electrical glitch. as the fuel guage is affeected I would suspect the instrument binical connections and/or failing dry cracked solder joints on the PCB. the former just spray connections with electrical cleaner and re-attach, with the later disconnect the neg earth lead before taking the binical out. Take care with a magnifying glass to spot cracking and re-flow the joints. Also you may have a failed level indicator in the expansion bottle so could replace with new OEM unit first. Hope this helps :-)
@HatBoyHarvey thanks for your reply, I will clean all the connections 1st if that fails ill install a new expansion bottle, if that fails I'll have to pay £120 for a diagnostic.
Re flowing the cluster solder seems to have done the job......or its because I disconnected the battery and it did a reset !!! Regardless thank you......
@@kieran5937 great, fingers crossed🤞 problem won't reoccur :-) did you find any bad solder joints?
@HatBoyHarvey one solder joint was black, just happy your solution worked👍
What is the price for the water tank please
There is a a link in the description to the product:-)
Can i just clean water tank instead of buying new one?
If you sensor is working then yes, if not then I would recommend a new one. By all means clean the old one to see if that works, if it then does and your happy with it then, great job sorted :-)