RMRRF 2024 Voron Cascade, V-core 4, Wire EDM, Flycron, Positron, BTT and More...
Vložit
- čas přidán 3. 06. 2024
- All of my coverage of Rocky Mountain RepRap Festival 2024 in one monster length video. I minimised the editing and fancy shots to try and show more of the passion of the makers and creators at these events.
0:00 Hueforge COLOURS!
3:46 Flycron - Literally a flying gantry
14:59 Voron Cascade CNC Machine
21:14 RatRig V-Core 4
31:19 Rack Robotics Wire EDM
45:26 BigTreeTech - LOTS OF COOL STUFF
54:36 Olli3D High Temp Ducts
59:40 Deposition Sounds Printed Speakers
1:07:58 Beacon Contact
1:14:53 Swiss 3DC Toolless Hotends
1:20:53 Vision Miner Adhesive
1:25:00 Positron Upside printer in a Filament Box
Buy my designs: vector3d.shop
Support me Via Patreon: / vector3d
Chat on Twitter: @Adam_V3D
Join the Vector 3D Discord: / discord - Věda a technologie
Nobody was expecting a wire EDM machine to show up at RMRRF 😂
I think a few were, its very much a maker tool and all made with 3D printing so it does kinda make sense, even if its not a 3d printer itself. One of the best interviewees in my opinion.
That ACTUAL flying gantry is one of the most insane things i've ever seen and especially the fact its keeping better tolerances then some normal printers ive seen is just absolutely mind blowing.
This minimal cut approach is fantastic. It's just amazing listen to passionate people speak about the cool things they made, makes me all warm and fuzzy inside. This community is amazing! Thanks for the video Adam!
Thanks :)
I double this!
Subscribed.
This is by far the best RMRRF coverage.
Even Voron folks suck at it ( I have Voron printers ), guys wanna compete attention when you basically let the guys explain their stuff and showed things that matter.
Solid 10/10
Thanks for sharing this. The positron is the project I like most.
Can't wait to test Swiss3Dc nozzle, this system look very promising.
This is (in my opinion), the best summarized vlog of RMRRF. All news and updates in a single VOD with minimal cuts. Well paced and awesome show and tell of the products/projects in first person view. Thanks for the video.
Ive built a Ratrig for my Uni and they are very nice. The paneling now beeing easier to source is a big plus
The Best RMRRF 2024 walking tour ! thx
This is by far the best RMRRF overview / tour done. Thanks for taking the time to edit your videos to keep valuable content and leave the rest out. Takes time but it's worth it.
Over 1 hour?! Can't wait to watch this while in the train tomorrow! Still working on my (12 min) video about the event 😅
Adam, it was really nice to see you again.
Haha yes, its a long one! Was great to see you too.
That place was flipping PACKED on Saturday
Thanks Adam, exactly the video I was looking for: great selection of projects, nice sound!
Nice to see an actual Swiss company that makes hot ends and not one that just uses the name (which isn't actually allowed according to Swiss law). Can't wait to try it out.
Thank god im not the only one thinking this whole "swiss name and flag in name while nothing is from Switzerland" thing would be illegal in the EU. It would be a misleading company name after all
Totally agree... thanks for the support.
A massive thank you Adam for taking the time to record all this for us, lots of exciting things on the horizon
Fantastic show review - the best of all the YT coverage. Thank you. I've purchased a number of the products profiled. I wish you would do a thorough review of all the BTT products, removing and translating all the acronyms for those of us who don't know or speak the alphabet soup of product nomenclature. Examples: EBB, SKR, M4P, TMC2209, BTTPi, SFS, etc.
The best of the show tours! Thank you for your work.
Thank you for showing us, a nice selection of things form the event!
Got 3-4 more items for my bucket list😅
Thanks for sharing this, I wish I could have attended this event, much appreciated the wide coverage.
Been wonderful to watch. Thanks for taking your time to put this together, it's been really inspiring
The Hueforge guy is very clever
edit: wow the flying gantry is amazing!
That was just the best report we could get from the RMRRF. Thank you!
Nice collection of actual technical chats. Thanks.
FINALLY POSITRON NEWS
Bwance's passion and knowledge comes through so well in the Flycron segment, the Armchair folks are mental and genius.
Loved this it's the conversations that we would all want to have with these people so thank you
I really wanted to go to RMRRF this year but couldn't make it. This is the next best thing, and in some ways probably better. I really appreciate the length and depth of coverage, and the intelligent questions. What an incredible resource.
This was great! I feel I attended and was following you peaking over the shoulder xD
Great coverage thanks 🙂
Wow that dual heater hotend is sick
Cool isn't it! should be capable of high performance and easy nozzle change!
It's incredibly clever !
Though I'm concerned with how small the nozzle's external diameter is. Meaning, a high flow geometry like the cht might not be possible
@@geekoid183 well, you might be surprised, did not show it all :)
EDM for desktop woww. i need it.
Thank you!!
1:25:00
honestly this version does make me excited to own one of these printers, can't wait for further refinements
I am really interested in that wild hotend from Swiss 3DC
👀 that v-core 4 👀
hopefully I'll get one on the channel before too long!
@@Vector3DP would LOVE that!
Looks like a 9mm vz bot belt path wonder why they went hybrid core xy instead of awd now we have people in vz bot thinking of a hybrid awd jeesh
@@mikealnutt360My gues is that X axis performance never was a big issue, Y axis was always the bottleneck. Also maybe it is easier for them in "mass"-production to scale.
One definite advantage is you got more belt for the Y axis and thus less belt stretch. The belt cross-section is essentially doubled, while normal AWD just uses the same belt.
@steilkurbler4973 well get ready for a 6 or 8wd next only idlers on the x gantry .... I'm jk but who knows I'd like to see input shaper graphs to see the difference between there 2 systems
The toolless hotends look very interesting, but it seems questionable how reliable they are when changed often and melted material is stuck to them. In the end a lot of cleaning necessary?
Thanks for the RMRRF coverage. Super excited for the EDM. Don't suppose you got the inside scoop on when they'll be shipping to the UK?
Ye, the EDM is really cool. I don't think i asked about UK shipping so i don't have any more info im afraid.
No biggie, I'll just have to wait. Meant to ask as well, now that Ooznest has stopped selling filament where do you get most of yours from?
@@Vector3DPwe're working on EU and UK compliance. Should be able to accept orders for the EU at least in the coming weeks
@@russellkeyes3984mostly bambu, some prusament.
@@cooperzurad7012can it replace cnc?
1:12:09 What printer frame/core it is? look like ratrig but builded with high quality and stability.
What do we think the secret is on the side of the ECRF v2 machine?
Why no one has made a variable nozzle by now? A piece which turns and opens/closes the hole. This would speed up printing dramatically without losing quality. Print inside with 1.2mm and walls with 0.2 in one go. It's like hardware support for arachne generator
Anyone made a toolchanger for the rat rig already?
That flying gauntry is actually prety great idea. However not for small printer. It wold be great for construction on tall structures
Trying to get a heavyweight concrete pumping gantry to fly doesn't seem ideal 😅
@@Vector3DP Maybe not ideal, but very fun. Big engines are fun
Can you please explain what it means to "Join" this channel. I see what it costs, but I'm not clear on what the benefits are and what the different levels (PLA, PETG, etc.) mean as it relates to "Joining". Is this just a different form of Patreon? I want to support you, but I also want to know what to expect. I searched for information on this but came up empty handed.
Bunch of neat things to see 🤔 Kinda already a sucker for that CNCed BTT Voron Kit 😑 Kinda lost me on the Beacon Contact though... Is it supposed to act as some kind of Load Sensor? 🤨
Beacon is an eddy current based extremely fast bed mesh scanner. You can do something line 11x11 bed mesh in less than a minute, which would normally take ages on a regular probe. The problem is that it only works with metallic surfaces like spring steel sheets etc. It's fine with magnetic sheet under the build surface, but not if you have few big magnets. Also, you need to calibrate it (though you can store your calibration settings) for each build plate and nozzle combination. The calibration involves using old paper-under-nozzle test and manually moving the nozzle up/down when calibrating, which is time consuming.
What beacon contact is that they've figured out a way to do the nozzle contact scanning with purely some software changes (no idea how they do it, but obviously has to be something they can measure with Beacon itself). What that allows is then to use Beacon as a traditional nozzle contact scanner, but with a VERY light touch on the bed. So you can use it on say if your build surface is glass or if you have big magnets under the build plate. Also, it allows for full automation of the calibration of bed and. nozzle combination since it can now accurately know when the nozzle is in contact with the bed. You could even calibrate at the start of the print and then do a super fast mesh with the regular scanning mode.
I have a Beacon myself and absolutely love it and with this software update (no hardware changes needed of any kind) it's going to be so much better if you swap build surfaces or nozzles.
@@flamepygmy you mean 100x100 in less than a minute 😅
My understanding is that the probe is using eddy currents to sense the nozzle and the bed, instead of just the bed like it was before. The way that it can detect contact is due to the inductance of the “sensed” components changing as the nozzle approaches/touches the bed.
if the nozzles weren't unique to microswiss, I'd get that.... I hope they do make a CHT version because their hotend is really cool! I was gonna buy an e3d obxidian but now i'm tempted to wait.
Which bit you taking about here?
Talking*
@@Vector3DP Swiss 3DC! wait that's a different company isn't it?!
1:30:20 nice portable 3d printer. But make exclusive belt i dont like because make expensive maintance.
Regarding the Flycron. Wouldn't it make sense to use counter weights for the gantry. This way the RC Aircraft propellers could be way smaller and more silent. What do you guys think?
Well, not sure any of it makes sense really. If you want to simplify it, use stepper motors... It was really all about the memes, not about making a good printer.
That would be cheating, we wouldn't stand for that! 🤣
1:21:34 👀
Flyron bloke is quite intelligent, but what is the point of the concept? beside excessive electricity usage and a higher failure rate?
It was an April Fools joke (as he stated a couple of times). Admittedly an extremely over the top joke.
@@tomlavedas44 Thanks for the info mate, I had scanned through and had not watched the video in its full context evidently lol
The point is to make cool shit and put it on the internet!
@@greenveg42 The point is it's a joke
yep... right... sure... yeah... right... mmhm...