Honda Goldwing GL 1800 Clutch Master Cylinder Flush/ Bleed
Vložit
- čas přidán 7. 09. 2024
- Honda Goldwing GL 1800 Clutch Master Cylinder Flush Bleed is a video that will show the location of the clutch bleed screw and the process of flushing/bleeding the system. Over time the fluid breaks down and gets water in it. The video will show the difference between clean fluid and dirty fluid. Always use a brand new bottle of DOT4 so you can guarantee no moisture or trash. You will need a 10mm socket and wrench but this is a very
simple DIY that should take less than 20 min. If you don't have a vacuum-like
the Mighty-Vac I would suggest a second person to give you a hand.
Below is a link to the Goldwing 1800 playlist, also some products if you need them. Thank you so much for watching. Please Like- Subscribe-Comment and feel free to share.
Here is the Playlist
• Honda Goldwing Playlist
********************************************************************
Please join our community! It would mean The WORLD To Us!!!
Thank you so much for letting us be a part of your world.
Visit our store at:
www.amazon .com/shop/jamiejone...
/ jamiejones_. .
/ jamiejonesth. .
twitter.co
********************************************************************
1. Mighty Vac amzn.to/3EBplJz
The MV8000 kit includes: Selectline hand-vacuum pump (Model MV8010); 4.5 oz. fluid reservoir and lids; (7) tapered adapters; (2) tapered manifold plugs; (3) bleed screw adapters; (4) connection tubes (24", 1-1/2", 3", 3-5/8") and cupped and tube adapters.
Performs one-person engine performance diagnostics, vacuum brake and clutch bleeding, fluid transfer, evacuation, sampling, windshield repair, turbocharger testing and diesel fuel priming.
Convenient one-finger vacuum release.
Premium gearless diaphragm gauge.
Reinforced handle improves durability
2.DOT 4 Brake Fluid amzn.to/3Oth1jv
PERFORMANCE - The 336⁰ F wet boil point and 521⁰ F dry boil point exceeds common characteristics for DOT 4 brake fluids
PROTECTION - Provides corrosion protection in brake components
PEACE OF MIND - Matches needs of all DOT 4 manufacturer recommendations
HARSH CONDITIONS - Offers low level of compressibility
FITS EVERYTHING - Compatible with all DOT 3 and DOT 4 applications
Soooooo.....when do the how-to start?
Just give us the info on how to change the fluid. We don't need the guy trying to be a comedian .
I have the same bike with CSC conversion …love your lift system, would you share where or what brand your hoist is for the trike. Thanks for sharing the clutch bleed
Too much clowning around to be an in depth informative video. Just my opinion.
To much B -S
Lol ok , hope it helped
Too much drunk talk, very little useful information.
What are you talking about ?
We covered everything to do the job
I learned absolutely nothing. 👎🏼
lm looking for another one? golding perhaps ? .have some bmws . I think a GL would be a nice addition
Nice cluch comment clown shoes...
Got ourselves a coupla wanna be jokesters here. Except they aren't funny.
Good grief this was a waste of time. Just give us the content
Wasn't worth the time. Thanks for trying.