I Paint Shaker Style Doors SO Fast Like This... Vid
Vložit
- čas přidán 28. 05. 2024
- Hi everyone!
I'm showing you my way of painting a shaker style door.
Im using a graco 595 airless sprayer with a 310 fine finish tip.
I hope you enjoy!
If you found this video helpful, please leave a like and a comment.
Enjoy The Video
Ryan
If you liked the video or have learnt somthing from it, please Subscribe and Share.
Also leave a comment :-)
I also have a Membership you can join to support the channel (Link below)
If you like my content & would like to support the channel monetarily you could become a youtube member with really cool PERKS!
/ @thelondoncraftsmanwor...
Or directly via paypal:
PayPal.me/TLcraftsman
****SPRAY ROOM TOOLS & MATERIALS****
GRACO 695 ULTRAMAX 2 AIRLESS SPRAYER - amzn.to/2O7HDJp
GRACO 390 PC AIRLESS SPRAYER - amzn.to/2LX0Ufw
GRACO RAC X GUARD - amzn.to/34tVFuo
GRACO 110 FINE FINISH LOW PRESSURE TIP - amzn.to/2PRrrvO
GRACO 310 FINE FINISH LOW PRESSURE TIP - amzn.to/2PIMQHC
GRACO 410 FINE FINISH LOW PRESSURE TIP - amzn.to/2spuWSd
SPRAY BOOTH TURNTABLE - amzn.to/35oNj8v
SIP SPACE HEATER - amzn.to/30ADvq9
SPRAY FILTERS ON A ROLL - amzn.to/2TyIlTz
TWIN SLOT SHELVING UPRIGHTS - amzn.to/2uTXapl
TWIN SLOT SHELVING BRACKETS 10 PACK (370MM) - amzn.to/38l76H2
PIPE INSULATION (TO PROTECT SHELVING BRACKETS) - amzn.to/2tjUK37
400MM ADJ SPEED EXTRACTOR FANS - amzn.to/2TCfBJK
****BANGGOOD TOOLS ****
UPGRADED PARALLEL GUIDES - www.banggood.com/custlink/GmD...
ADJUSTABLE TRACK SAW SQUARE - www.banggood.com/custlink/mKv...
HONGDUI CHAMFER PLANE - www.banggood.com/custlink/mDm...
200MM CARPENTERS SQUARE - www.banggood.com/custlink/33K...
300MM PRECISION SQUARE - www.banggood.com/custlink/m3m...
300MM ANGLE T SQUARE - www.banggood.com/custlink/vmK...
600mm ROOFING/CARPENTER SQAURE - www.banggood.com/custlink/D3K...
PAIR OF BESSEY COPY WRATCHET CLAMPS - www.banggood.com/custlink/K3G...
PLUS MORE...
ALUMINIUM HINGE JIG - www.banggood.com/custlink/3vKEQHIQgd
POCKET COMPASS - www.banggood.com/custlink/333...
DRAWER/DOOR HANDLE JIG - www.banggood.com/custlink/KKv...
DRAWER/DOOR HANDLE JIG - www.banggood.com/custlink/3vv...
GUIDE TRACK SAW SQUARE (BUDGET) - www.banggood.com/custlink/KK3...
ATOMSTACK LASER - www.banggood.com/custlink/mDG...
****TREND TOOLS****
SMALL FINGER PULL CUTTER - amzn.to/3GAMaAh
MEDIUM FINGER PULL CUTTER - amzn.to/3EqsMD6 (USED IN THIS VIDEO)
LARGE FINGER PULL CUTTER - amzn.to/3OmNZmf
TREND ROUTER TABLE - amzn.to/3TS7Omz
TREND T14 ROUTER - amzn.to/3hZDkl1
TREND T35 HOOVER - amzn.to/3V9Q3jn
****OTHER WORKSHOP TOOLS****
HYUNDAI HY55 COMPRESSOR - amzn.to/3PwujMm
VIRUTEX AG98F EDGER - amzn.to/3MbHroc
PAINTABLE EDGING - amzn.to/3EniuTK
PAIR OF BESSEY COPY WRATCHET CLAMPS - www.banggood.com/custlink/K3G...
T - TRACKS AS SHOWN ON MY ULTIMATE WORKBENCH - amzn.to/37WKIJd
1.6MM RADIUS - MICRO ROUND CUTTER FOR 1/4" ROUTER TRIMMER - amzn.to/3cTCYW6
MAKITA ROUTER TRIMMER - amzn.to/3JNENDp
SANDING DISCS - amzn.to/2FZe1JI
MAKITA ORBITAL SANDER - amzn.to/2TIkUqK
CTS HOSE KIT - amzn.to/3FCLXIL
MAKITA HOOVER - amzn.to/3cvNl3p
MAKITA CHOP SAW / MITRE SAW (LS1019L) - amzn.to/330BcCF
SCISSOR LIFT/CHOP SAW LIFT - amzn.to/3goeaI
MAKITA ROUTER TRIMMER( MUST HAVE!!! ) - amzn.to/3JNENDp
1/4" FLUTE CUTTER
1.6MM RADIUS - MICRO ROUND CUTTER FOR 1/4" ROUTER TRIMMER - amzn.to/3cTCYW6
JIGSAW - amzn.to/2R9z7em
POWER DRILL - amzn.to/2V2SGWT
MAKITA BELT SANDER - amzn.to/2UWDudW
BOSCH CHOP/MITRE SAW - amzn.to/3dUmyxl
MAKITA BRAD NAILER - amzn.to/2YOuiK0
MITRE FAST SPRAY GLUE - amzn.to/34pvYem
35MM HINGE CUTTER - amzn.to/2POJR09
SIP 10" TABLE SAW - amzn.to/2udA4JU
250mm TREND 48T BLADE - amzn.to/3aq2pgI
KETER FOLDING WORKBENCH (THIS IS A MUST BUY) - amzn.to/2NEWzyk
JOINTING COMPOUND FILLER - amzn.to/30AlVD2
ORBITAL SANDER SANDING DISCS ASSORTED - amzn.to/2FZe1JI
500MM GTV SIDE MOUNTED DRAWER RUNNERS - amzn.to/2sJ6YBU
MAKITA COMBI & IMPACT DRILL SET 18V - amzn.to/37qwNpi - Jak na to + styl
More than one way to skin a rabbit.
If you've found a product and method that works for you then no reason to change. Same as the door construction.
Your work looks mint and the customers are happy. Job's a good 'un. 👌🏻
Cheers Steven, really kind of you to say!
Thanks for the message and the support on here 👍👍👍
A great video for movers and shakers
Thanks for all the tips. I've made MDF Shaker style doors (traditional way ) and used the poor man's sprayer cheap Wagner . They came out alright but this was before I started watching you. Have some more to do so will use some of your tips. I have a tip for you also. When you get water drops on the MDF, dab it as normal if it is really wet first but to get it dry within about 30s hold a vacuum cleaner nozzle on it so ithe nozzle sticks to the MDF with it's suction. This will remove all the water and leave the spot dry. (move around as needed).
Would love a decent breakdown of your paint choice opinions man, If you where looking for a video idea like lol.
just got an airless, very excited , waiting on some fin 210,310 tips in the post, built a little sectioned off booth in the shed, using your booth as inspiration.
really enjoying this channel , there's not many informal, information packed, easy to watch lads out there doing what your doing.
Thanks very much for your content.
Hi thank you. I appreciate all the cool comments 👍👍👍
Regarding the paints I do have other videos where I talk about what paints I use.
I'm a bit different from other people. I use silk for my primer and eggshell or satin for my topcoats, all waterbased.
Again most other spraying type vids will have this info in.
Really happy for you... airless is great, just need to keep practicing your spray technique and what pressure you need, but after that it's easy and so fast!
Good luck!
Cheers ryan
Nice job!
Another great video x
Great video x
Merci beaucoup 😉
Water based silk emulsion, looks good. What brand do you use?
It varies, but wickes mainly
Great video!!! thanks
Thanks like always Michael!
Much appreciated!! 👍👍👍
Nice video!
Cheers mate! 😁
usually dont worry about the profile they all get filled spraying straight , especially if your doing 3 coats. Btw, ive never felt confortable doing mdf shakers by gluing the styles because of the telegraph on the joints, do you have any solutions for that?
Can you spray water based diamond eggshell or satin over the top of the trade silk?
I do and have for the past 10 years 👍
Once you sand it back smooth it's just like any other primer/undercoat (in my opinion) 👍👍
@@thelondoncraftsmanworkshop awesome, do you find its quick drying compared to other primers? Should save me a fortune compared to using Zinsser!
@mananddog9884 well on a summers day it'll dry in an hour or so, or half a day if it's not so warm .
With my space heater on, then only an hour to dry.
But yeah you'll save a few quid for sure. I stopped using specialist primers a long long time ago...
Does the first coat on anything your priming always look abit patchy/faded until you build up layers or should the first coat of paint still make the panel look evenly covered if you know what I mean? Thanks mate 👌🏻
Well I put my 1st coat on pretty heavy so it's not really patchy.
If you go less heavy then I guess it would look patchy. That's not a problem in my eyes, it just may mean you need 4 coats rather than 3.
I do a total of 3 coats and I think it works because if putting on the first coat heavy. 👍
@@thelondoncraftsmanworkshop thanks mate 👍🏻
I noticed a fair bit of flex in those large doors laying flat. Does all that disappear when the doors are hung and upright?
Apologies, CZcams sometimes holds back some comments for some reason!
Yes straight away, I could have supported the door better with a piece of wood, but it wouldnt have mad any difference to how the door is fitted :-)
Ryan
Hi Ryan , great content as always. So with this paint, just this for everything, undercoat, edges etc?
Thank you!!
Yes this is what I do and it works for me 👍👍
I do one coat, then sand back then a final 2 coats. 👍👌
Tried and tested now, great tip thanks Ryan 🙌🏻
@@user-iy6lr1tj9y that's great to hear 👍👍
Is that emulsion paint you're using?
Yes waterbased silk.