Video není dostupné.
Omlouváme se.
Honda petrol yard scrapper ( what i think after 5 years )
Vložit
- čas přidán 2. 12. 2019
- In this video i decided to do a review of our Honda petrol yard scrapper as many of you want to know what i thought of it. Well here's the good and the very bad!!!!!!
If you like our video's then don't forget to subscribe for more.........
Follow us on instagram: / ifarmwefarm80
Nothing goes wrong with it except for the tyres, engine, throttle & starter.
George Kenny wear and tear is to be expected
@@IFarmWeFarm
😂 I'm only having a laugh buddy, I love your videos, happy Christmas. 👍
George Kenny same to you and yours lad 😊
I have one similar to this. Got it from unique inventions in Kilkenny. Iv a rotary brush for mine and a fork for it for pushing in silage also a frame for attaching a jfc big wheelbarrow to .
Barrett agri you love to see that in operation, sounds great
Is the seal on the dip stick gone or is the exhaust out let facing up or is the seal of that silver cover where the timing belt is ,letting in water and one more is there any cracks on the air filter cover ,I think what they charged ya for fixing it u should of slapped on a Briggs engine.
I know someone who bought one and cannot start it.
Good tip here.
great little machine. u'll probably have to use the fork at the new shed
Deutz390 will be using the bale splitter over there so no need for it.
@@IFarmWeFarm could you do a video on feeding as never seen how the McHale balesplitter actually works 😀👍
Great honest vid very clean yard .... how?
Michael Garry brush and shovel 🙂
Good video can we see a feeding video ?
Are the outside of rubber wearing when it is lifted and the swivel let's it hit hit the concrete? Really enjoy your channel. Merry Christmas from Canterbury, New Zealand!! 🎄🎄🎄
Murray Smith great to here from New Zealand, welcome to the channel. It could very well be, it still does the job and I might grind down the rest of the rubber to level it out again and get a few more years out of it. 👍
Hi can you angle the blade it would make it easy just one run up or down to push the silage in
steyrman2 yes you can angle the blade for that
Great video what ya want to do is get a new Honda engine for it and change out
Nathan Cannon it’s working perfectly now, I wouldn’t put that kind off money into it anyhow
Was the tilt in the scraper part to do with the tyres being different maybe a shorter tread makes it sit up more in front. Serious little yoke
If shes not blue she'll not do, that’s a good point, but no not in this case as I put on a taller tyre to compensate for the flat tread, the scraper plate isn’t tilted back either so it’s just worn. Probably get a shock when I order a new one 😬💰
Have that machine. Find it great for cleaning out cubicle house. How do you fix a Punture? Do you take off wheel or leave it on?
Martin O Neill take the wheel off, there’s a nut in the axle that you remove and the whole thing pulls out
New video later 2day or 2nite
Might be worth looking at a replacment briggs engine
Wouldn't be worth the hassle, its running well at the minute so i might just change it for a new one in the summer
Would it be able for dry muck or would it ride over it?
Gerard Broderick no probably not, it can push out straw bedding with ease though, piles of power
Can the rubber be turned round and reused and can you get a rotary brush for it 👍
No flies on you
@@irishguy200007 plenty on you I reckon
found out about your channel from gerry6420
Martin Fitzpatrick welcome to the channel Martin
Good video lad how is your yard so tidy
Calum Bourke just keep it tidy as I go along. I thought it was dirty 😬
When is the milking video coming out
Paul O'grady very soon
Good machine just joined you Gerry 6420 sent me over I'll have to check out your other videos cheers Antony 👍 👍
Antony farming welcome to the channel Antony
Can ya scrape down cubicles with it..... Not a chance, wud still need d squidge
Christopher Sheridan it makes a great cup of coffee though 🙂
How many acres do you have
Where in cavan are u from
Gerry6420 sent me here xx
james gregg welcome to the channel James
@@IFarmWeFarm use boys down south know how to keep a tidy yard ! Good stuff xx
james gregg sometimes.... not always 😂
Where abouts in ireland, are you from?
John Robinson Co.Cavan
I’m from England but, I have lots of family in Limerick, I’m going over next week to see them, so hello from co limerick
John Robinson Thanks lad, have a good Christmas 👌
IFarm WeFarm you too 👍🏼
I had an Aprilia 500 scooter and if the engine was not getting hot enough (thermostat gone or short runs) the unburnt fuel found its way into the sump and contaminated the engine oil. If there are any plastic parts in the sump the petrol will weaken them. My drive on the oil pump stripped all its teeth.
aoifeone sounds very similar to this, could very well be the problem. It’s ok now as long as I change the oil every few weeks which isn’t that big of a deal. Thanks for the tip lad 👌
Where are you from
Milky oil might be water in the fuel
Forgive me buy do I expect fr Jack or Fr Ted to walk past the camera?
When are you putting up a new video
1100 is a bit much
Odhran Byrne €1450 now
IFarm WeFarm considering the amount of work u use it for it’s probably good but for an engine a pair of wheel a handle and a scraper it’s a bit high
Just buy a new one
Oran Moss that would the perfect world, it’s working fine now anyhow so alls good
Is there no more moisture getting in